Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

https://youtu.be/FNjbgGAucRQ

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Okay, so this is something that happens a lot, and it can seem like a small thing, but it can be a little confusing when it keeps happening. What’s going on when you float in the same tank and keep drifting to one side? How does that happen? And why is it so consistent? Graham and Ashkahn know what the deal is here and drop some knowledge here on this topic.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is, “is my water out of level? I always float to the same side of my pod. At first I thought it was subtle waves interacting with my symmetry, so I flipped 180 degrees and ended up right back on the same side of the tank.”

Ashkahn: Well … Okay, so water can’t be out of level. It’s naturally leveling. If you put, if you had water in a glass and you tilted your glass in any direction, the top of the water is always going to stay level. It’s liquids.

Graham: Yeah, so physically impossible for your water to be out of level, but I mean I get, so what if it’s, can it affect how waves are generated, or someone’s moving, like the wave machine when they go up on shore, all of a sudden you have cresting little salt waves?

Ashkahn: I’m just thinking on the back of the float tank like generate, like a little wall pushing back and forth, like a wave machine.

Graham: Well you’re kind of the wave generator in this case.

Ashkahn: But the waves would also be level. They’d be on the surface of the water.

Graham: But if it’s tilted to one-

Ashkahn: I don’t know.

Graham: Yeah, I don’t know. Okay, so here’s what I think is going on.

Ashkahn: Here’s what’s happening.

Graham: There are different reasons that you drift to the side of the tank. I do actually think that personal physical asymmetry could very well be one of them, like if your back is really tight, but if you’re turning around and you’re going-

Ashkahn: But that would, you’d have to be like pushing off of something. You contort your body in there.

Graham: Yeah, or just like slightly drifting.

Ashkahn: At the point that you’re still, you can be still in any position and remain still, even if your body was off balance. It’s not going to cause you to drift.

Graham: See I don’t know. When you’re breathing and different things like that, you’re naturally generating small currents inside the water.

Ashkahn: Sure. I just think all that, compared to what we’re about to say is the thing, I think all of this is way, way, way more subtle.

Graham: Okay, what were you … We’ll say what we think it is at the same time.

Ashkahn: Okay.

Graham: All right. Three, two …

Ashkahn: One.

Graham: Okay, I’m just going to do a countdown. Three, two, one. It’s heaters.

Ashkahn: It’s your heaters. It’s probably your heaters is what’s going on here.

Graham: It’s your heaters. You heater is off center or it’s just generating-

Ashkahn: That creates, that can create these kind of like convection currents in the water. If you’re floating in there, and if there’s two heaters in the float tank, or however the heater is set up and installed, the bottom rim, the sides, whatever it is, if those are not on symmetrically, then that’s going to create something that’s going to continuously edge you toward one side of the float tank or the other.

Graham: Yeah, so maybe it’s the physical placement is not quite centered. Maybe if it’s two heaters, one is getting more power than another.

Ashkahn: Or it’s just that the, sometimes two heaters have two separate thermostats and one is reading at a fine temperature and doesn’t think it needs to be turned on, and the other one is reading at a temperature where it does think it needs to be turned on.

Graham: Yup, even if it’s just one solid heater, or built in heating element throughout the tank, that can also just be certain coils and different areas getting hotter than other ones and causing this imbalance too depending on how it’s set up.

Ashkahn: Yeah. My guess is that is probably I think the only thing that would really significantly make you continuously drift to one side of the tank or the other.

Graham: Yup, especially again if it’s the exact same side regardless of orientation or anything else. If you’re always going to the east side of the tank, not like left or right, then I think that’s a good sign that-

Ashkahn: At the point that you’re still, I even think differences in your body and … I don’t know, my breathing pattern I’ve found is not specifically edged me toward anything. For me to really move in the float tank, I have to slightly push off a wall, or in general create some more significant movement.

Graham: See and I’ve talked to people who always go over to the left side of the tank, regardless of whether it’s east or west.

Ashkahn: Of any tank?

Graham: Yes.

Ashkahn: They just always scoot over to the left side?

Graham: Yeah, that’s exactly. I was like, this is the kind of conversation that I had with them.

Ashkahn: Hmm.

Graham: I don’t know.

Ashkahn: I don’t know. All right, well it’s probably the way this person described it.

Graham: Just one of the many things I don’t know about to be fair.

Ashkahn: So check your heaters out. I mean the easiest thing to do is when you’re in the float tank, just put your hands on the bottom or the sides. You’ll be able to feel if the heater is on or not. If you have two heaters, you can put your hands down and you’ll feel one warm and one not. You don’t have to tear your floater tank apart to check this.

Graham: I guess as long as we’re on the subject of heaters and convection currents, it is one reason that I like heaters around the outside of the tank, or even around the inner outside if it’s on the bottom, or something like that. This idea of being able to heat from the sides and push the currents inwards is really a nice idea. As opposed to, on the other side, having one centered heater in the center of the bottom of the tank feels like it’s most likely to generate these currents that hit the top and the center and sort of push off towards the sides in some direction.

Ashkahn: Yeah, it’s an interesting one. I think there’s pros … I find if the tank’s real big and it has heaters only around the side, I can feel it’s warmer as I get closer to the side of a tank than when I’m in the middle as opposed if the heaters are under it. Then all that heat, hot water, is kind of rising out from right under you, which is nice.

Graham: And there’s the ocean float room that just has the entire tub is built in with a heating element.

Ashkahn: Yeah, like a heating grid thing around the whole thing?

Graham: Yeah, exactly. Just kind of heats evenly around the entire tub, which I think helps with things like that.

Ashkahn: Yeah, but having something, just a single strip of heater right directly under you is I guess typically not what float manufacturers do. Usually they’re doing, if it’s on the bottom, they’re kind of putting them slightly out towards the middle so that it does-

Graham: Yeah, but having two of them or something like that instead of just a single one underneath.

Ashkahn: Yeah, it does kind of like help center you, or if it’s around the edges, then that does a better effect of centering you.

Graham: All right.

Ashkahn: Yeah.

Graham: So yeah, water always levels itself.

Ashkahn: That’s the lesson for today.

Graham: All right. If you have any more questions, go to floattanksolutions.com/podcast.

Recent Podcast Episodes

How to Build your Mailing List – DSP 325

Graham and Ashkahn consistently emphasize the importance of mailing lists, but today they dive in deep to talk about how to build a mailing list, giving their best tips and tricks to collecting emails and how to make sure you’re getting the right people signed up. 

How to Deal with Employee Conflict – DSP 324

Graham and Ashkahn address the unenviable task of dealing with disagreements between staff members as a small business. This is an area that Float On has needed a lot of help with in the past. The best practices of Human Resources aren’t very intuitive in interpersonal relationships, so hiring a professional is almost always a good idea.

Float Tanks in the Military – DSP 323

The military is famously tight lipped about the research it does in general. No less so than when researching seemingly benign practices like float tanks. 
Graham and Ashkahn give their scoop on what they know about the military’s use of float tanks in their research and training programs. 

Best Cleaning Practices without Burning Out Employees – DSP 322

Every float center has to compromise somewhere on how much cleaning to do between transitions. Where do you draw the line and how do you make sure that you’re keeping your employees happy without sacrificing sanitation?

Graham and Ashkahn remind everyone that “perfect” sanitation doesn’t exist and that making solutions collaborative in a work environment can do wonders for morale and problem solving in situations like this one.

Good Website Copy for Float Centers – DSP 321

Most websites you visit are filled with words. And that may seem simple, but if you build a website, you’re going to have to be the one to come up with those words. How do you decide what to put up there and how much is too much? What should you focus on? 

Graham and Ashkahn tackle the elusive web copy problem for float centers and provide some helpful tips for anyone who’s feeling a little overwhelmed at the concept.

Latest Blog Posts

Timeline for Opening Up a Float Center

Timeline for Opening Up a Float Center

Opening up a float center is a lot like climbing a mountain. Even if you can see the peak, it’s a lot further away than you think, and when you finally get there, the journey and the destination usually end up being different than previously assumed.

In this post we’ll lay out a general process and timeline of what you may encounter on your path, from initial idea to actually operating a center.

Can you have volunteers at your center?

Can you have volunteers at your center?

So you’re thinking about using volunteers in your float center?

Before we clarify what a “volunteer” actually means, we’ll first explore why a float center might be considering them in the first place. While it can be a way to provide floats to people who are otherwise unable to pay, the impulse to bring in volunteers can also stem from a desire to get some sort of free labor (later in this post we’ll dive into why you can’t actually do this, but it’s important to recognize that the instinct is understandable, especially when you have someone lined up and willing to work for free).

In addition to a desired boost in overall productivity, it’s also a way to invite more people into your center to experience what you do. Some customers actually want to help out and see what happens behind the scenes at a center.

Floating and Athletics, a Strong Relationship

Floating and Athletics, a Strong Relationship

One of the beautiful things about the float tank is that it serves to rejuvenate the whole person. — the body, mind, heart.

Broadly speaking, it’s a tool for homeostasis, an ideal environment that supports balance, health, and growth. This piece will look specifically at floating and athletics. For anyone who defines themselves as an athlete, or as a general pursuant of athletic endeavors, the float tank can be a powerful asset.

In this post, I’ll discuss individual athletes who float and how to look at this from a marketing perspective. I’ll also discuss past and present research, and share some thoughts on how the relationship between the athletic and floating communities might continue to unfold.

A Skeptic’s Guide to Floating

A Skeptic’s Guide to Floating

I think it’s time we addressed the giant metaphorical elephant in the salty metaphorical room — there are lots of exaggerated and untrue claims about the benefits of floating being spread around the industry.

Some are anecdotal, some are only half true, and some are just patently false. Floating has historically had a strong oral tradition tied to it — the practice has survived through word-of-mouth, one passionate floater teaching another everything they know. The unfortunate thing about this is that the information disseminated can’t be reliably tested or shared with others on a broader scale. You can’t use “my buddy Chris” as a source for a health benefit of float tanks in a newspaper article, much less for a research paper.

Now that we’re becoming a bit more mainstream, we thought it would be nice to add some clarity to what we should and shouldn’t be telling people about these difficult-to-understand, saliferous containers.