Something in the world of floating have you stumped?
Show Highlights
Okay, so this is something that happens a lot, and it can seem like a small thing, but it can be a little confusing when it keeps happening. What’s going on when you float in the same tank and keep drifting to one side? How does that happen? And why is it so consistent? Graham and Ashkahn know what the deal is here and drop some knowledge here on this topic.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “is my water out of level? I always float to the same side of my pod. At first I thought it was subtle waves interacting with my symmetry, so I flipped 180 degrees and ended up right back on the same side of the tank.”
Ashkahn: Well … Okay, so water can’t be out of level. It’s naturally leveling. If you put, if you had water in a glass and you tilted your glass in any direction, the top of the water is always going to stay level. It’s liquids.
Graham: Yeah, so physically impossible for your water to be out of level, but I mean I get, so what if it’s, can it affect how waves are generated, or someone’s moving, like the wave machine when they go up on shore, all of a sudden you have cresting little salt waves?
Ashkahn: I’m just thinking on the back of the float tank like generate, like a little wall pushing back and forth, like a wave machine.
Graham: Well you’re kind of the wave generator in this case.
Ashkahn: But the waves would also be level. They’d be on the surface of the water.
Graham: But if it’s tilted to one-
Ashkahn: I don’t know.
Graham: Yeah, I don’t know. Okay, so here’s what I think is going on.
Ashkahn: Here’s what’s happening.
Graham: There are different reasons that you drift to the side of the tank. I do actually think that personal physical asymmetry could very well be one of them, like if your back is really tight, but if you’re turning around and you’re going-
Ashkahn: But that would, you’d have to be like pushing off of something. You contort your body in there.
Graham: Yeah, or just like slightly drifting.
Ashkahn: At the point that you’re still, you can be still in any position and remain still, even if your body was off balance. It’s not going to cause you to drift.
Graham: See I don’t know. When you’re breathing and different things like that, you’re naturally generating small currents inside the water.
Ashkahn: Sure. I just think all that, compared to what we’re about to say is the thing, I think all of this is way, way, way more subtle.
Graham: Okay, what were you … We’ll say what we think it is at the same time.
Ashkahn: Okay.
Graham: All right. Three, two …
Ashkahn: One.
Graham: Okay, I’m just going to do a countdown. Three, two, one. It’s heaters.
Ashkahn: It’s your heaters. It’s probably your heaters is what’s going on here.
Graham: It’s your heaters. You heater is off center or it’s just generating-
Ashkahn: That creates, that can create these kind of like convection currents in the water. If you’re floating in there, and if there’s two heaters in the float tank, or however the heater is set up and installed, the bottom rim, the sides, whatever it is, if those are not on symmetrically, then that’s going to create something that’s going to continuously edge you toward one side of the float tank or the other.
Graham: Yeah, so maybe it’s the physical placement is not quite centered. Maybe if it’s two heaters, one is getting more power than another.
Ashkahn: Or it’s just that the, sometimes two heaters have two separate thermostats and one is reading at a fine temperature and doesn’t think it needs to be turned on, and the other one is reading at a temperature where it does think it needs to be turned on.
Graham: Yup, even if it’s just one solid heater, or built in heating element throughout the tank, that can also just be certain coils and different areas getting hotter than other ones and causing this imbalance too depending on how it’s set up.
Ashkahn: Yeah. My guess is that is probably I think the only thing that would really significantly make you continuously drift to one side of the tank or the other.
Graham: Yup, especially again if it’s the exact same side regardless of orientation or anything else. If you’re always going to the east side of the tank, not like left or right, then I think that’s a good sign that-
Ashkahn: At the point that you’re still, I even think differences in your body and … I don’t know, my breathing pattern I’ve found is not specifically edged me toward anything. For me to really move in the float tank, I have to slightly push off a wall, or in general create some more significant movement.
Graham: See and I’ve talked to people who always go over to the left side of the tank, regardless of whether it’s east or west.
Ashkahn: Of any tank?
Graham: Yes.
Ashkahn: They just always scoot over to the left side?
Graham: Yeah, that’s exactly. I was like, this is the kind of conversation that I had with them.
Ashkahn: Hmm.
Graham: I don’t know.
Ashkahn: I don’t know. All right, well it’s probably the way this person described it.
Graham: Just one of the many things I don’t know about to be fair.
Ashkahn: So check your heaters out. I mean the easiest thing to do is when you’re in the float tank, just put your hands on the bottom or the sides. You’ll be able to feel if the heater is on or not. If you have two heaters, you can put your hands down and you’ll feel one warm and one not. You don’t have to tear your floater tank apart to check this.
Graham: I guess as long as we’re on the subject of heaters and convection currents, it is one reason that I like heaters around the outside of the tank, or even around the inner outside if it’s on the bottom, or something like that. This idea of being able to heat from the sides and push the currents inwards is really a nice idea. As opposed to, on the other side, having one centered heater in the center of the bottom of the tank feels like it’s most likely to generate these currents that hit the top and the center and sort of push off towards the sides in some direction.
Ashkahn: Yeah, it’s an interesting one. I think there’s pros … I find if the tank’s real big and it has heaters only around the side, I can feel it’s warmer as I get closer to the side of a tank than when I’m in the middle as opposed if the heaters are under it. Then all that heat, hot water, is kind of rising out from right under you, which is nice.
Graham: And there’s the ocean float room that just has the entire tub is built in with a heating element.
Ashkahn: Yeah, like a heating grid thing around the whole thing?
Graham: Yeah, exactly. Just kind of heats evenly around the entire tub, which I think helps with things like that.
Ashkahn: Yeah, but having something, just a single strip of heater right directly under you is I guess typically not what float manufacturers do. Usually they’re doing, if it’s on the bottom, they’re kind of putting them slightly out towards the middle so that it does-
Graham: Yeah, but having two of them or something like that instead of just a single one underneath.
Ashkahn: Yeah, it does kind of like help center you, or if it’s around the edges, then that does a better effect of centering you.
Graham: All right.
Ashkahn: Yeah.
Graham: So yeah, water always levels itself.
Ashkahn: That’s the lesson for today.
Graham: All right. If you have any more questions, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
How to Help Float Research – DSP 300
With the push from Justin Feinstein at LIBR to get more float centers involved in research, many float center owners are chomping at the bit to push studies forward on the benefits of floating. But where do you start and how do you make it happen?
Graham and Ashkahn discuss this idea and how to do research right, as well as some of the things that might be helpful OR harmful to the world of floating in the eyes of the scientific community. There’s a lot of nuanced things to know about proper research and if you go in overzealous without considering how established science is done, it can harm the reputation of the practice.
Tips on Running Power to Float Rooms – DSP 299
Graham and Ashkahn offer some helpful tips to keep in mind when planning out the electrical framework for your float rooms. How many circuits you should plan for, where to place outlets, GFCI compliance, just to name a few.
Definitely an essential episode for anyone to listen to before going into their build-out phase.
Floating in National Media – DSP 298
Seeing float tanks in the national news and culture has increased in regularity within the last few years. Graham and Ashkahn discuss how these things get on such a large platform. The guys briefly go over some of the major stories that have been all over the media and how those stories happened. Mostly it comes down to luck, but there are a few things that can increases the chances of your float center getting on national TV.
The Real Tips on Building Your Own Float Tank – DSP 297
Someone wrote in and asked, again, despite the repeated warnings of the previous episode covering this topic, how to build a float tank properly.
Graham and Ashkahn try their best to restrain themselves and offer some practical advice about how to build your own tanks while also repeatedly warning about things to look out for when going forward with the process.
How to Handle Other Float Centers Spying on You – DSP 296
Graham and Ashkahn talk about how they deal with other float centers spying on Float On.
Basically… they don’t. The float industry is a really open community and a lot of information is generally freely available. If someone is spying on a float center, that could be a result of poor communication skills or a lack of awareness of what information is actually out there. The guys share their advice on how to talk to someone who might be in that situation and how to move forward, hopefully as friends instead of rivals.
Latest Blog Posts
Reflections from the Rise Float Gathering
Over this past weekend, a good chunk of the Float Tank Solutions and Float Conference crew ventured to St. Louis, MO for the first ever Rise Community Float Gathering. Beyond our excitement to see old friends and meet new ones, we were thrilled to be able to attend a float event that we didn’t have to plan.
When it comes to float tanks, we often deal with a lot of the “what” and the “how” of things – what do I need to do to open a float center and how to I make everything work? We write blogs and put out content. We spend our days thinking about conference flowcharts, water chemistry, detailed business plans, soundproof insulation, etc.
Rise, on the other hand, focused on the “why?”
The Story Behind the Float Marketing Forum
Over the past few years, primarily through feedback received from conference attendees and through industry survey responses, float center owners struggled with and wanted a solution to one thing… marketing. It makes sense – if there’s one thing every center needs (besides salt), it’s a solid flow of customers in tanks.
After some brainstorming with Ashkahn, we’ve decided the best solution for this year was to host a series panels covering key marketing topics that will provide the biggest impact in growing your float center business.
Introducing: The Float Conference Marketing Forum.
Announcing the 2nd Ever Start-a-Center Giveaway WINNER!
In what was one of the most difficult decisions that we had to make as a team… and after sorting through nearly 200 entries… we’ve decided upon a winner in our second ever Start-a-Center Giveaway.
Read more to learn who we’ll be guiding through the process in starting a float tank center in their community.
Gut your space before construction!
One line we don’t think you should cross is this: as much as possible, when building out your float center, gut it completely. Start from scratch.
At least then the mistakes you make are your own and your building will hold fewer surprises down the line. There are many benefits that you may not think of immediately. In this post, we’ll guide you through some of them.
