Something in the world of floating have you stumped?
Show Highlights
Okay, so this is something that happens a lot, and it can seem like a small thing, but it can be a little confusing when it keeps happening. What’s going on when you float in the same tank and keep drifting to one side? How does that happen? And why is it so consistent? Graham and Ashkahn know what the deal is here and drop some knowledge here on this topic.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “is my water out of level? I always float to the same side of my pod. At first I thought it was subtle waves interacting with my symmetry, so I flipped 180 degrees and ended up right back on the same side of the tank.”
Ashkahn: Well … Okay, so water can’t be out of level. It’s naturally leveling. If you put, if you had water in a glass and you tilted your glass in any direction, the top of the water is always going to stay level. It’s liquids.
Graham: Yeah, so physically impossible for your water to be out of level, but I mean I get, so what if it’s, can it affect how waves are generated, or someone’s moving, like the wave machine when they go up on shore, all of a sudden you have cresting little salt waves?
Ashkahn: I’m just thinking on the back of the float tank like generate, like a little wall pushing back and forth, like a wave machine.
Graham: Well you’re kind of the wave generator in this case.
Ashkahn: But the waves would also be level. They’d be on the surface of the water.
Graham: But if it’s tilted to one-
Ashkahn: I don’t know.
Graham: Yeah, I don’t know. Okay, so here’s what I think is going on.
Ashkahn: Here’s what’s happening.
Graham: There are different reasons that you drift to the side of the tank. I do actually think that personal physical asymmetry could very well be one of them, like if your back is really tight, but if you’re turning around and you’re going-
Ashkahn: But that would, you’d have to be like pushing off of something. You contort your body in there.
Graham: Yeah, or just like slightly drifting.
Ashkahn: At the point that you’re still, you can be still in any position and remain still, even if your body was off balance. It’s not going to cause you to drift.
Graham: See I don’t know. When you’re breathing and different things like that, you’re naturally generating small currents inside the water.
Ashkahn: Sure. I just think all that, compared to what we’re about to say is the thing, I think all of this is way, way, way more subtle.
Graham: Okay, what were you … We’ll say what we think it is at the same time.
Ashkahn: Okay.
Graham: All right. Three, two …
Ashkahn: One.
Graham: Okay, I’m just going to do a countdown. Three, two, one. It’s heaters.
Ashkahn: It’s your heaters. It’s probably your heaters is what’s going on here.
Graham: It’s your heaters. You heater is off center or it’s just generating-
Ashkahn: That creates, that can create these kind of like convection currents in the water. If you’re floating in there, and if there’s two heaters in the float tank, or however the heater is set up and installed, the bottom rim, the sides, whatever it is, if those are not on symmetrically, then that’s going to create something that’s going to continuously edge you toward one side of the float tank or the other.
Graham: Yeah, so maybe it’s the physical placement is not quite centered. Maybe if it’s two heaters, one is getting more power than another.
Ashkahn: Or it’s just that the, sometimes two heaters have two separate thermostats and one is reading at a fine temperature and doesn’t think it needs to be turned on, and the other one is reading at a temperature where it does think it needs to be turned on.
Graham: Yup, even if it’s just one solid heater, or built in heating element throughout the tank, that can also just be certain coils and different areas getting hotter than other ones and causing this imbalance too depending on how it’s set up.
Ashkahn: Yeah. My guess is that is probably I think the only thing that would really significantly make you continuously drift to one side of the tank or the other.
Graham: Yup, especially again if it’s the exact same side regardless of orientation or anything else. If you’re always going to the east side of the tank, not like left or right, then I think that’s a good sign that-
Ashkahn: At the point that you’re still, I even think differences in your body and … I don’t know, my breathing pattern I’ve found is not specifically edged me toward anything. For me to really move in the float tank, I have to slightly push off a wall, or in general create some more significant movement.
Graham: See and I’ve talked to people who always go over to the left side of the tank, regardless of whether it’s east or west.
Ashkahn: Of any tank?
Graham: Yes.
Ashkahn: They just always scoot over to the left side?
Graham: Yeah, that’s exactly. I was like, this is the kind of conversation that I had with them.
Ashkahn: Hmm.
Graham: I don’t know.
Ashkahn: I don’t know. All right, well it’s probably the way this person described it.
Graham: Just one of the many things I don’t know about to be fair.
Ashkahn: So check your heaters out. I mean the easiest thing to do is when you’re in the float tank, just put your hands on the bottom or the sides. You’ll be able to feel if the heater is on or not. If you have two heaters, you can put your hands down and you’ll feel one warm and one not. You don’t have to tear your floater tank apart to check this.
Graham: I guess as long as we’re on the subject of heaters and convection currents, it is one reason that I like heaters around the outside of the tank, or even around the inner outside if it’s on the bottom, or something like that. This idea of being able to heat from the sides and push the currents inwards is really a nice idea. As opposed to, on the other side, having one centered heater in the center of the bottom of the tank feels like it’s most likely to generate these currents that hit the top and the center and sort of push off towards the sides in some direction.
Ashkahn: Yeah, it’s an interesting one. I think there’s pros … I find if the tank’s real big and it has heaters only around the side, I can feel it’s warmer as I get closer to the side of a tank than when I’m in the middle as opposed if the heaters are under it. Then all that heat, hot water, is kind of rising out from right under you, which is nice.
Graham: And there’s the ocean float room that just has the entire tub is built in with a heating element.
Ashkahn: Yeah, like a heating grid thing around the whole thing?
Graham: Yeah, exactly. Just kind of heats evenly around the entire tub, which I think helps with things like that.
Ashkahn: Yeah, but having something, just a single strip of heater right directly under you is I guess typically not what float manufacturers do. Usually they’re doing, if it’s on the bottom, they’re kind of putting them slightly out towards the middle so that it does-
Graham: Yeah, but having two of them or something like that instead of just a single one underneath.
Ashkahn: Yeah, it does kind of like help center you, or if it’s around the edges, then that does a better effect of centering you.
Graham: All right.
Ashkahn: Yeah.
Graham: So yeah, water always levels itself.
Ashkahn: That’s the lesson for today.
Graham: All right. If you have any more questions, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
How do you Start Opening a Float Center? – DSP 285
For people just starting out, it can seem really daunting to start a float center. They may not even know where to begin.
Graham and Ashkahn tackle this idea head on. The most important thing is to do a lot of research (definitely check the resources) and to make sure you have people that you can call and refer to for support when you need it.
What to do When Floaters Interrupt Intros? – DSP 284
Ashkahn’s back and on form. He and Graham take on the question of how to handle first time floaters interrupt the pre-float intros explaining the process.
There’s a lot of information that first time floaters need, and if they aren’t paying attention, it can cause messy floats or unnecessary difficulty or confusion. The reunited duo provides some great tips while going over different customer scenarios.
When is the Best Time to Open a Float Center? – DSP 283
Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.
Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.
Tips for Choosing Contractors – DSP 282
Graham the Lone Podcaster takes the reigns on answering how to pick a contractor for float center build out.
It’s the kind of big decision that every float center owner hopes to only make once, so getting as much information ahead of time is extremely useful. Graham breaks down some useful tips and explains how to ask for a bid, specific skill sets to look for, and general advice on knowing when to walk away.
Starting your Pumps Early – DSP 281
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Latest Blog Posts
4,937 Things to Know About Buying a Used Float Tank
You’re thinking about buying a used float tank. Whether this is for a new center, an addition to an existing operation, or a purchase for your home, this is a big decision.
We’ve compiled together some of the major questions and considerations to entertain before making a purchase. While you do have the opportunity to save some money and snag a good deal, there can be hidden costs and unknowns to weigh against those savings.
Offering Overnight Floats
Almost three years ago, we discussed the merits of running overnight floats from an employee’s perspective, focusing on the opportunities of this unique experience as well as its challenges. We’d like to take a deeper dive into this issue because, while the majority of floaters come through our tanks during “normal” business hours, overnight floats form an important part of not only Float On’s identity, but also its business structure and broader culture.
How to Talk About Floating
You step into the elevator and shuffle to the side to make room for the kind-eyed, old woman with the miniature poodle.
“Good morning,” you say with a smile.
“Good morning,” she beams back, her gaze resting briefly on your water bottle with the logo from your float center’s annual party.
After a brief pause, she asks, “What is Float-a-Palooza?”
You take a breath, smile, and launch into your literal elevator pitch.
So, what do you say?
Employee Handbook Template
Whether you are a small or large float center, you most likely have other employees working for you. Regardless of the size of your staff, for reasons of efficiency and legality, it’s essential that your organization has clear and straightforward policies and guidelines. No matter how good employee communication is, it’s always safest and cleanest to have clear parameters and expectations written down.
This is why Float Tank Solutions has created a customizable Employee Handbook Template. Free for anyone to download, it contains federally compliant language (current as of October 2016) and contains a multitude of sections, from employee benefits and compensation descriptions to job guidelines and discrimination policies.
