Something in the world of floating have you stumped?
Show Highlights
Okay, so this is something that happens a lot, and it can seem like a small thing, but it can be a little confusing when it keeps happening. What’s going on when you float in the same tank and keep drifting to one side? How does that happen? And why is it so consistent? Graham and Ashkahn know what the deal is here and drop some knowledge here on this topic.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “is my water out of level? I always float to the same side of my pod. At first I thought it was subtle waves interacting with my symmetry, so I flipped 180 degrees and ended up right back on the same side of the tank.”
Ashkahn: Well … Okay, so water can’t be out of level. It’s naturally leveling. If you put, if you had water in a glass and you tilted your glass in any direction, the top of the water is always going to stay level. It’s liquids.
Graham: Yeah, so physically impossible for your water to be out of level, but I mean I get, so what if it’s, can it affect how waves are generated, or someone’s moving, like the wave machine when they go up on shore, all of a sudden you have cresting little salt waves?
Ashkahn: I’m just thinking on the back of the float tank like generate, like a little wall pushing back and forth, like a wave machine.
Graham: Well you’re kind of the wave generator in this case.
Ashkahn: But the waves would also be level. They’d be on the surface of the water.
Graham: But if it’s tilted to one-
Ashkahn: I don’t know.
Graham: Yeah, I don’t know. Okay, so here’s what I think is going on.
Ashkahn: Here’s what’s happening.
Graham: There are different reasons that you drift to the side of the tank. I do actually think that personal physical asymmetry could very well be one of them, like if your back is really tight, but if you’re turning around and you’re going-
Ashkahn: But that would, you’d have to be like pushing off of something. You contort your body in there.
Graham: Yeah, or just like slightly drifting.
Ashkahn: At the point that you’re still, you can be still in any position and remain still, even if your body was off balance. It’s not going to cause you to drift.
Graham: See I don’t know. When you’re breathing and different things like that, you’re naturally generating small currents inside the water.
Ashkahn: Sure. I just think all that, compared to what we’re about to say is the thing, I think all of this is way, way, way more subtle.
Graham: Okay, what were you … We’ll say what we think it is at the same time.
Ashkahn: Okay.
Graham: All right. Three, two …
Ashkahn: One.
Graham: Okay, I’m just going to do a countdown. Three, two, one. It’s heaters.
Ashkahn: It’s your heaters. It’s probably your heaters is what’s going on here.
Graham: It’s your heaters. You heater is off center or it’s just generating-
Ashkahn: That creates, that can create these kind of like convection currents in the water. If you’re floating in there, and if there’s two heaters in the float tank, or however the heater is set up and installed, the bottom rim, the sides, whatever it is, if those are not on symmetrically, then that’s going to create something that’s going to continuously edge you toward one side of the float tank or the other.
Graham: Yeah, so maybe it’s the physical placement is not quite centered. Maybe if it’s two heaters, one is getting more power than another.
Ashkahn: Or it’s just that the, sometimes two heaters have two separate thermostats and one is reading at a fine temperature and doesn’t think it needs to be turned on, and the other one is reading at a temperature where it does think it needs to be turned on.
Graham: Yup, even if it’s just one solid heater, or built in heating element throughout the tank, that can also just be certain coils and different areas getting hotter than other ones and causing this imbalance too depending on how it’s set up.
Ashkahn: Yeah. My guess is that is probably I think the only thing that would really significantly make you continuously drift to one side of the tank or the other.
Graham: Yup, especially again if it’s the exact same side regardless of orientation or anything else. If you’re always going to the east side of the tank, not like left or right, then I think that’s a good sign that-
Ashkahn: At the point that you’re still, I even think differences in your body and … I don’t know, my breathing pattern I’ve found is not specifically edged me toward anything. For me to really move in the float tank, I have to slightly push off a wall, or in general create some more significant movement.
Graham: See and I’ve talked to people who always go over to the left side of the tank, regardless of whether it’s east or west.
Ashkahn: Of any tank?
Graham: Yes.
Ashkahn: They just always scoot over to the left side?
Graham: Yeah, that’s exactly. I was like, this is the kind of conversation that I had with them.
Ashkahn: Hmm.
Graham: I don’t know.
Ashkahn: I don’t know. All right, well it’s probably the way this person described it.
Graham: Just one of the many things I don’t know about to be fair.
Ashkahn: So check your heaters out. I mean the easiest thing to do is when you’re in the float tank, just put your hands on the bottom or the sides. You’ll be able to feel if the heater is on or not. If you have two heaters, you can put your hands down and you’ll feel one warm and one not. You don’t have to tear your floater tank apart to check this.
Graham: I guess as long as we’re on the subject of heaters and convection currents, it is one reason that I like heaters around the outside of the tank, or even around the inner outside if it’s on the bottom, or something like that. This idea of being able to heat from the sides and push the currents inwards is really a nice idea. As opposed to, on the other side, having one centered heater in the center of the bottom of the tank feels like it’s most likely to generate these currents that hit the top and the center and sort of push off towards the sides in some direction.
Ashkahn: Yeah, it’s an interesting one. I think there’s pros … I find if the tank’s real big and it has heaters only around the side, I can feel it’s warmer as I get closer to the side of a tank than when I’m in the middle as opposed if the heaters are under it. Then all that heat, hot water, is kind of rising out from right under you, which is nice.
Graham: And there’s the ocean float room that just has the entire tub is built in with a heating element.
Ashkahn: Yeah, like a heating grid thing around the whole thing?
Graham: Yeah, exactly. Just kind of heats evenly around the entire tub, which I think helps with things like that.
Ashkahn: Yeah, but having something, just a single strip of heater right directly under you is I guess typically not what float manufacturers do. Usually they’re doing, if it’s on the bottom, they’re kind of putting them slightly out towards the middle so that it does-
Graham: Yeah, but having two of them or something like that instead of just a single one underneath.
Ashkahn: Yeah, it does kind of like help center you, or if it’s around the edges, then that does a better effect of centering you.
Graham: All right.
Ashkahn: Yeah.
Graham: So yeah, water always levels itself.
Ashkahn: That’s the lesson for today.
Graham: All right. If you have any more questions, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
How to Deal with Humidity in Float Rooms – DSP 185
Humidity can be a subtle, difficult, and persistent challenge for a lot of float centers. Aside from just the massive amount of humidity that a float tank can create, showers also generate a lot of humidity. This can be a challenge for your construction, your soundproofing, and your floater’s comfort.
Fortunately, everyone has to deal with this issue, so there’s a lot of tips out there. Unfortunately, there isn’t an exact science on the best humidity for float rooms as of yet. Graham and Ashkahn unmuddle this quandary a bit before muddling it back up again.
What to do if your Float Center Loses Power – DSP 184
What do you do with your float center if an emergency happens? What if your center loses power for several days and there’s nothing you can do about it? Float tanks rely on having a well regulated system to stay functional and we know that if it gets out of whack, everything can get pretty messy. So if you know this is happening, how do you prevent the worst of it?
Graham and Ashkahn work through this problem and come up with some solutions to prevent things like salt crystallization and upsetting your tank chemistry too much.
How to Handle Business Partner Disputes – DSP 183
It’s often said that having business partners is a lot like having a marriage, and just like a successful marriage, having a successful relationship with your business partner (or partners, we’re not here to judge) requires effective communication, patience, and compromise.
Float On has 5 owners, and they haven’t always agreed on the best course of action. So naturally disagreements happen, but how you handle them is the worthier part. Graham and Ashkahn share their experiences and what’s helped make Float On a success 7 years and counting.
Float Center Name Suggestions – DSP 182
There’s enough float centers out there now to have some established naming conventions for centers. It can feel like all the good names are already taken. Fortunately, Graham and Ashkahn have taken the time come up with a list of a few floaty sounding names that are so far not taken but totally awesome.
What Benefits of Floating have been Proven Scientifically? – DSP 181
Most float centers have to deal with the difficult problem of describing the benefits of floating to those who haven’t tried it yet or are just starting their float journeys. What is safe and accurate to say? Obviously, you don’t want to be advertising false claims if you can help it, but it can be difficult to find accurate information that tells a full story about floating.
Graham and Ashkahn dive into the resources available and clear up some of the confusion surrounding our salty practice. Check out the show notes for a list of great resources!
Latest Blog Posts
How to Reduce Ground Vibrations for Float Tanks
While sound and light proofing are the most salient examples of sensory deprivation involved with float tanks, we receive questions regarding the elimination of low-rumbling noises caused by vibrations from the surrounding environment. Since it’s important that float...
Presenting the 2014 State of the Float Industry
A Word on Our Data Where it Comes from & What it all Means Just before the 2014 Float Conference, we sent out two questionnaires to members of the float community. One targeting existing centers to see how they got started, what they’re doing now, and what...
How to Run Useful Tests With Your Construction
“Negative results are just what I want. They’re just as valuable to me as positive results. I can never find the thing that does the job best until I find the ones that don’t.” ― Thomas A. Edison Test Early, Test Often There are few things as terrifying as spending a...
Before Your Float Center has a Location, Get Online
So… You want to start a float center? One of the first thing people do is they begin researching. They scour the internet for float tank information in preparation for holding educated conversations with future customers. After all, you will be seen as the expert, so...
