Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

https://youtu.be/FNjbgGAucRQ

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Okay, so this is something that happens a lot, and it can seem like a small thing, but it can be a little confusing when it keeps happening. What’s going on when you float in the same tank and keep drifting to one side? How does that happen? And why is it so consistent? Graham and Ashkahn know what the deal is here and drop some knowledge here on this topic.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is, “is my water out of level? I always float to the same side of my pod. At first I thought it was subtle waves interacting with my symmetry, so I flipped 180 degrees and ended up right back on the same side of the tank.”

Ashkahn: Well … Okay, so water can’t be out of level. It’s naturally leveling. If you put, if you had water in a glass and you tilted your glass in any direction, the top of the water is always going to stay level. It’s liquids.

Graham: Yeah, so physically impossible for your water to be out of level, but I mean I get, so what if it’s, can it affect how waves are generated, or someone’s moving, like the wave machine when they go up on shore, all of a sudden you have cresting little salt waves?

Ashkahn: I’m just thinking on the back of the float tank like generate, like a little wall pushing back and forth, like a wave machine.

Graham: Well you’re kind of the wave generator in this case.

Ashkahn: But the waves would also be level. They’d be on the surface of the water.

Graham: But if it’s tilted to one-

Ashkahn: I don’t know.

Graham: Yeah, I don’t know. Okay, so here’s what I think is going on.

Ashkahn: Here’s what’s happening.

Graham: There are different reasons that you drift to the side of the tank. I do actually think that personal physical asymmetry could very well be one of them, like if your back is really tight, but if you’re turning around and you’re going-

Ashkahn: But that would, you’d have to be like pushing off of something. You contort your body in there.

Graham: Yeah, or just like slightly drifting.

Ashkahn: At the point that you’re still, you can be still in any position and remain still, even if your body was off balance. It’s not going to cause you to drift.

Graham: See I don’t know. When you’re breathing and different things like that, you’re naturally generating small currents inside the water.

Ashkahn: Sure. I just think all that, compared to what we’re about to say is the thing, I think all of this is way, way, way more subtle.

Graham: Okay, what were you … We’ll say what we think it is at the same time.

Ashkahn: Okay.

Graham: All right. Three, two …

Ashkahn: One.

Graham: Okay, I’m just going to do a countdown. Three, two, one. It’s heaters.

Ashkahn: It’s your heaters. It’s probably your heaters is what’s going on here.

Graham: It’s your heaters. You heater is off center or it’s just generating-

Ashkahn: That creates, that can create these kind of like convection currents in the water. If you’re floating in there, and if there’s two heaters in the float tank, or however the heater is set up and installed, the bottom rim, the sides, whatever it is, if those are not on symmetrically, then that’s going to create something that’s going to continuously edge you toward one side of the float tank or the other.

Graham: Yeah, so maybe it’s the physical placement is not quite centered. Maybe if it’s two heaters, one is getting more power than another.

Ashkahn: Or it’s just that the, sometimes two heaters have two separate thermostats and one is reading at a fine temperature and doesn’t think it needs to be turned on, and the other one is reading at a temperature where it does think it needs to be turned on.

Graham: Yup, even if it’s just one solid heater, or built in heating element throughout the tank, that can also just be certain coils and different areas getting hotter than other ones and causing this imbalance too depending on how it’s set up.

Ashkahn: Yeah. My guess is that is probably I think the only thing that would really significantly make you continuously drift to one side of the tank or the other.

Graham: Yup, especially again if it’s the exact same side regardless of orientation or anything else. If you’re always going to the east side of the tank, not like left or right, then I think that’s a good sign that-

Ashkahn: At the point that you’re still, I even think differences in your body and … I don’t know, my breathing pattern I’ve found is not specifically edged me toward anything. For me to really move in the float tank, I have to slightly push off a wall, or in general create some more significant movement.

Graham: See and I’ve talked to people who always go over to the left side of the tank, regardless of whether it’s east or west.

Ashkahn: Of any tank?

Graham: Yes.

Ashkahn: They just always scoot over to the left side?

Graham: Yeah, that’s exactly. I was like, this is the kind of conversation that I had with them.

Ashkahn: Hmm.

Graham: I don’t know.

Ashkahn: I don’t know. All right, well it’s probably the way this person described it.

Graham: Just one of the many things I don’t know about to be fair.

Ashkahn: So check your heaters out. I mean the easiest thing to do is when you’re in the float tank, just put your hands on the bottom or the sides. You’ll be able to feel if the heater is on or not. If you have two heaters, you can put your hands down and you’ll feel one warm and one not. You don’t have to tear your floater tank apart to check this.

Graham: I guess as long as we’re on the subject of heaters and convection currents, it is one reason that I like heaters around the outside of the tank, or even around the inner outside if it’s on the bottom, or something like that. This idea of being able to heat from the sides and push the currents inwards is really a nice idea. As opposed to, on the other side, having one centered heater in the center of the bottom of the tank feels like it’s most likely to generate these currents that hit the top and the center and sort of push off towards the sides in some direction.

Ashkahn: Yeah, it’s an interesting one. I think there’s pros … I find if the tank’s real big and it has heaters only around the side, I can feel it’s warmer as I get closer to the side of a tank than when I’m in the middle as opposed if the heaters are under it. Then all that heat, hot water, is kind of rising out from right under you, which is nice.

Graham: And there’s the ocean float room that just has the entire tub is built in with a heating element.

Ashkahn: Yeah, like a heating grid thing around the whole thing?

Graham: Yeah, exactly. Just kind of heats evenly around the entire tub, which I think helps with things like that.

Ashkahn: Yeah, but having something, just a single strip of heater right directly under you is I guess typically not what float manufacturers do. Usually they’re doing, if it’s on the bottom, they’re kind of putting them slightly out towards the middle so that it does-

Graham: Yeah, but having two of them or something like that instead of just a single one underneath.

Ashkahn: Yeah, it does kind of like help center you, or if it’s around the edges, then that does a better effect of centering you.

Graham: All right.

Ashkahn: Yeah.

Graham: So yeah, water always levels itself.

Ashkahn: That’s the lesson for today.

Graham: All right. If you have any more questions, go to floattanksolutions.com/podcast.

Recent Podcast Episodes

When Should a Float Center be Profitable? – DSP 170

“When should I start making money?” is a deceptively simple and anxiety inducing question that every business owner has to face. Sometimes the answer is straightforward. There are lots of franchises that have near endless amounts of market research and profitability trends that point to a sensible timeline of when and how much you can expect versus a given investment. 

Float centers aren’t like that, unfortunately. There’s simply not enough data out there to create predictability in a market. The good news is that given the relatively low overhead excluding opening costs, float centers have the potential to be profitable almost immediately. Graham and Ashkahn break down this question and provide some tips on the issue.

Should we Pay for SEO (Search Engine Optimization) Services? – DSP 169

When opening any small business, you want to do what’s best to gain an edge in marketing and make sure that you’re doing your best for your flowering company. The new trends and changes can be daunting if you’re unfamiliar with technology or the marketing world. 

Float centers are no exception. So when you get a call from someone claiming to be able to boost your SEO standing, it can seem like a really good deal. How do you tell if these companies are legit? And do float centers really need SEO help? Graham and Ashkahn break this down and simplify it for the uninitiated. 

Should we do Tank Maintenance Ourselves? – DSP 168

As it turns out, there’s no certification program to running a float center. You buy these big expensive machines that require constant, technical maintenance and you’re on your own for how to accomplish that. There aren’t float tank repair persons that you can call (yet) and just have them show up and do it for you, so making sure you’re knowledgeable and prepared for this maintenance is a really good idea. 

Graham and Ashkahn lay out the Float On best practices for how to plan for maintenance so that it’s the least disruptive for your center if something goes wrong. 

What to Consider With a Home Float Center – DSP 167

Getting a tank in your house and floating some people is a great first step on the path to opening a float center. It helps you figure out exactly what the maintenance is going to be like, along with just the experience of floating other people and introducing them to this neat salty practice. 

There are things to consider and there’s a right way and a wrong way to run a home based float center. First thing to consider is your local laws for small businesses and making sure you comply with those. Additionally, you need to decide if you’re just floating friends and family or if you’re going to have paying customers. This is also going to impact what type of float tank you should use and the demands you should consider on your house. Graham and Ashkahn have seen plenty of these and share the best practices as they’ve seen them laid out. 

How to Deal With Burnout – DSP 166

Running a float center is hard work. Especially if you just opened up and dealt with months of agonizing, crazy construction, and then go straight into pulling long hours keeping your center open. Even with the reward of seeing floater’s post float glow can fall short of satisfying in some moments. 

It’s important in these moments to take time for yourself so as not to get devoured by your work. Ashkahn and Graham share some of the things that helped them stay sane working long, thankless shifts at Float On in the early days and get through the hard days so that they could thrive. 

Latest Blog Posts

Listening to Music in a Float Tank

Listening to Music in a Float Tank

To play or not to play music in the tank…

Some centers start the float with a few minutes of music and then fade away, some don’t play music until the end, and another float center will not let you turn off the light. In fact, they also have the noise of a automatic massage table, pounding away next to you, while other places will leave it up to the floater to decide. READ MORE…

Specific Gravity Specifics

Specific Gravity Specifics

Specific gravity is the ratio of the density of a substance to the density (mass of the same unit volume) of a reference substance. The reference substance is nearly always water for liquids or air for gases.” Specific gravity, then, in the case of our float tanks, is how dense the salt water is compared to regular, run of the mill water.

So, where should we keep the specific gravity of a float tank? READ MORE…

Don’t Squander Water in Your Showers

Don’t Squander Water in Your Showers

Once you start planning out the monthly costs for your float center, you’ll quickly come to appreciate a running joke in the industry: although you may think you’re providing floats, what you’re really doing is running a shower business.

Each person that floats at your center will take two showers: one before their float, and one after. These showers are definitely necessary. Before a customer enters a float tank, you’ll want them to shower in order to make sure that water contamination from skin oils and dirt is minimized, and after a float a customer is going to need a shower to remove the salty residue from their skin. READ MORE…

How Do You Properly Use Hydrogen Peroxide?

How Do You Properly Use Hydrogen Peroxide?

The Art of Floating, a great blog by the Float Shoppe here in Portland, has been answering questions that hit their inbox. Which is brilliant, and gives a second life to the extensive novellas on that minutiae of float tanks that I find myself writing daily. Here’s the first in what will hopefully be a series. READ MORE…