Something in the world of floating have you stumped?
Show Highlights
Okay, so this is something that happens a lot, and it can seem like a small thing, but it can be a little confusing when it keeps happening. What’s going on when you float in the same tank and keep drifting to one side? How does that happen? And why is it so consistent? Graham and Ashkahn know what the deal is here and drop some knowledge here on this topic.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “is my water out of level? I always float to the same side of my pod. At first I thought it was subtle waves interacting with my symmetry, so I flipped 180 degrees and ended up right back on the same side of the tank.”
Ashkahn: Well … Okay, so water can’t be out of level. It’s naturally leveling. If you put, if you had water in a glass and you tilted your glass in any direction, the top of the water is always going to stay level. It’s liquids.
Graham: Yeah, so physically impossible for your water to be out of level, but I mean I get, so what if it’s, can it affect how waves are generated, or someone’s moving, like the wave machine when they go up on shore, all of a sudden you have cresting little salt waves?
Ashkahn: I’m just thinking on the back of the float tank like generate, like a little wall pushing back and forth, like a wave machine.
Graham: Well you’re kind of the wave generator in this case.
Ashkahn: But the waves would also be level. They’d be on the surface of the water.
Graham: But if it’s tilted to one-
Ashkahn: I don’t know.
Graham: Yeah, I don’t know. Okay, so here’s what I think is going on.
Ashkahn: Here’s what’s happening.
Graham: There are different reasons that you drift to the side of the tank. I do actually think that personal physical asymmetry could very well be one of them, like if your back is really tight, but if you’re turning around and you’re going-
Ashkahn: But that would, you’d have to be like pushing off of something. You contort your body in there.
Graham: Yeah, or just like slightly drifting.
Ashkahn: At the point that you’re still, you can be still in any position and remain still, even if your body was off balance. It’s not going to cause you to drift.
Graham: See I don’t know. When you’re breathing and different things like that, you’re naturally generating small currents inside the water.
Ashkahn: Sure. I just think all that, compared to what we’re about to say is the thing, I think all of this is way, way, way more subtle.
Graham: Okay, what were you … We’ll say what we think it is at the same time.
Ashkahn: Okay.
Graham: All right. Three, two …
Ashkahn: One.
Graham: Okay, I’m just going to do a countdown. Three, two, one. It’s heaters.
Ashkahn: It’s your heaters. It’s probably your heaters is what’s going on here.
Graham: It’s your heaters. You heater is off center or it’s just generating-
Ashkahn: That creates, that can create these kind of like convection currents in the water. If you’re floating in there, and if there’s two heaters in the float tank, or however the heater is set up and installed, the bottom rim, the sides, whatever it is, if those are not on symmetrically, then that’s going to create something that’s going to continuously edge you toward one side of the float tank or the other.
Graham: Yeah, so maybe it’s the physical placement is not quite centered. Maybe if it’s two heaters, one is getting more power than another.
Ashkahn: Or it’s just that the, sometimes two heaters have two separate thermostats and one is reading at a fine temperature and doesn’t think it needs to be turned on, and the other one is reading at a temperature where it does think it needs to be turned on.
Graham: Yup, even if it’s just one solid heater, or built in heating element throughout the tank, that can also just be certain coils and different areas getting hotter than other ones and causing this imbalance too depending on how it’s set up.
Ashkahn: Yeah. My guess is that is probably I think the only thing that would really significantly make you continuously drift to one side of the tank or the other.
Graham: Yup, especially again if it’s the exact same side regardless of orientation or anything else. If you’re always going to the east side of the tank, not like left or right, then I think that’s a good sign that-
Ashkahn: At the point that you’re still, I even think differences in your body and … I don’t know, my breathing pattern I’ve found is not specifically edged me toward anything. For me to really move in the float tank, I have to slightly push off a wall, or in general create some more significant movement.
Graham: See and I’ve talked to people who always go over to the left side of the tank, regardless of whether it’s east or west.
Ashkahn: Of any tank?
Graham: Yes.
Ashkahn: They just always scoot over to the left side?
Graham: Yeah, that’s exactly. I was like, this is the kind of conversation that I had with them.
Ashkahn: Hmm.
Graham: I don’t know.
Ashkahn: I don’t know. All right, well it’s probably the way this person described it.
Graham: Just one of the many things I don’t know about to be fair.
Ashkahn: So check your heaters out. I mean the easiest thing to do is when you’re in the float tank, just put your hands on the bottom or the sides. You’ll be able to feel if the heater is on or not. If you have two heaters, you can put your hands down and you’ll feel one warm and one not. You don’t have to tear your floater tank apart to check this.
Graham: I guess as long as we’re on the subject of heaters and convection currents, it is one reason that I like heaters around the outside of the tank, or even around the inner outside if it’s on the bottom, or something like that. This idea of being able to heat from the sides and push the currents inwards is really a nice idea. As opposed to, on the other side, having one centered heater in the center of the bottom of the tank feels like it’s most likely to generate these currents that hit the top and the center and sort of push off towards the sides in some direction.
Ashkahn: Yeah, it’s an interesting one. I think there’s pros … I find if the tank’s real big and it has heaters only around the side, I can feel it’s warmer as I get closer to the side of a tank than when I’m in the middle as opposed if the heaters are under it. Then all that heat, hot water, is kind of rising out from right under you, which is nice.
Graham: And there’s the ocean float room that just has the entire tub is built in with a heating element.
Ashkahn: Yeah, like a heating grid thing around the whole thing?
Graham: Yeah, exactly. Just kind of heats evenly around the entire tub, which I think helps with things like that.
Ashkahn: Yeah, but having something, just a single strip of heater right directly under you is I guess typically not what float manufacturers do. Usually they’re doing, if it’s on the bottom, they’re kind of putting them slightly out towards the middle so that it does-
Graham: Yeah, but having two of them or something like that instead of just a single one underneath.
Ashkahn: Yeah, it does kind of like help center you, or if it’s around the edges, then that does a better effect of centering you.
Graham: All right.
Ashkahn: Yeah.
Graham: So yeah, water always levels itself.
Ashkahn: That’s the lesson for today.
Graham: All right. If you have any more questions, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
How to get your Water Tested – DSP 359
Every once in a while during float industry events, during this podcast, or talks given by health department professionals and the like, they’ll say something like “if you get your water tested and…”. But how does a float center do that? Where should they look? Is there just a lab that they can send their float solution to? Are all labs the same? How much does it cost?
Ashkahn and Graham take on the difficult task of making sense of microbiology testing laboratories, regulatory institutions, and acronyms, all so you don’t have to.
A Few of Our Favorite Things – DSP 358
Graham and Ashkahn take a break from all the doom and gloom of the float world to talk about the amazing things that floating has brought them. What they love, the things that surprised them, and the many ways in which they’re inspired to stick with it and pioneer in this wild and crazy industry.
Learning to Trust Your Gut in Business – DSP 357
Sometimes, the hardest part of starting any project is to just take the leap of faith complete step one.
With some words of encouragement and caution, Graham & Ashkahn channel their inner Tony Robbins and encourage a highly knowledgeable aspiring float center owner, to trust their gut and start their float center.
How Long to Run a Filter Between Floats – DSP 356
How long should you run the filtration system for between floats? It’s an eternal question that has plagued float center owners since the dawn of time (Or at least until 1978 when the first float center opened up).
Ashkahn and Graham break down the science behind why you should filter for as long as you do and how to properly plan for it. This densely packed episode is filled to the brim with a summary of knowledge on water dilution, filtration, flow meters, and water sanitation brought over to float tanks from the pool and spa world. Take notes as you listen, there’s a lot to assess.
How to Reward your Employees – DSP 355
Recognizing that your employees rock is one of the most valuable traits an employer can have, but only as long as said employer is able to properly acknowledge that appreciation.
Graham and Ashkahn share their take on rewarding employees for their hard work and how to make it count when you want to give them a gift. The duo has no shortage of examples of how they’ve shown their appreciation at Float On, and this episode is dense with examples of nice gifts and rewards to provide staff, from the practical to the symbolic.
Latest Blog Posts
B-Gray’s School on Nothing
I Got Nothing to Say! Okay, so here’s the thing. Floating is often associated with meditation and ultimately achieving this state of void, commonly and perhaps glibly referred to as “Nothing” by salty tank proprietors everywhere. And listen, I’m totally on board with...
The Daily Solutions Podcast – Our Top 5 Episodes for October
October was a hell of a floaty month. Between the float conference non-profit, Float On’s birthday, Ashkahn’s birthday, and Halloween, let’s just be a little grateful that the ol’ Grashkahmn duo didn’t miss a day on here. Especially since these episodes are so killer....
When (and how) Salt Attacks!
This post was spurred on by work that I did illustrating hundreds of pages for our Construction Packet. As an illustrator, I spend extra time nailing down details, just to eliminate potential sources of confusion. While looking into salt weathering, I came across some...
The Daily Solutions Podcast – Our Top 5 Episodes from September
September came and went like a flash, while everyone was recovering from the whirlwind that was the Float Conference, Graham and Ashkahn were fielding questions about all things great and small in the industry. Here’s a handful of our favorites. When is the Best Time...
