Something in the world of floating have you stumped?
Show Highlights
How do you figure out how many people to hire? What’s the ideal hours for a float employee to work? Is there such a thing as too many hours? Too few?
Graham and Ashkahn share their insights with staffing Float On and what their staff looks like to cover all their shifts running a six tank, 24 hour float center.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: Okaly blokaly guys, welcome back to the podcast.
Graham: Today we have a good one. It’s about our staffing, “How many staff does it take to run your shop? How many hours are they working on average?”
Ashkahn: Good question, listener.
Graham: Yep. Thanks for sending that in, and we’ll talk to you all next time.
Ashkahn: Have a great evening.
How many staff does it take to run a shop? There’s two ways to answer that question. How many people do we have there at any given point in time, and how many total people do we have on staff? This sounds more like they’re asking how many total people we have on staff.
Graham: But we might as well answer both of them.
Ashkahn: We have two people on at a time at our place, and that’s a whole other conversation I think about, how many people you need working at your shop at any given point in time.
Assuming you have that part figured out, it takes us about, for a 24 hour operation like ours, with two people on staff-
Graham: And six tanks.
Ashkahn: And six tanks. We have about usually 12 to 14 employees. Somewhere in that range.
Graham: I just double-checked. We’re doing some training right now of some new people coming on, so we might lose maybe one of those? But we have 14 people right now.
Ashkahn: We always seem to hover somewhere in that range. Twelve seems to be the lowest, and 14 seems to be generally the highest that our staff pool goes. That does not involve us, so we’re not really working any hours in there.
Graham: It does involve two shop managers as well, so of those 14 right now, two are managers, and 12 are more regular shop staff.
Ashkahn: Those managers are working hours too, and when they’re working, they’re working as one of those two people, so it’s not like two people plus a manager. It’s a manager there for however many hours, and then they’ll also work hours not at the shop doing more managerial stuff.
Graham: Pretty much the only time we’ll have more than that is when we’re doing deep cleans, when more people actually makes things go faster. You can crank through more tanks at a time.
Ashkahn: Right.
Graham: Or when we’re doing training, so if we have someone who’s coming on board and doing training, then we’ll have our two regular staff and then the third person who’s training up will also be there, shadowing them and helping out and learning.
Ashkahn: With 14 people, we tend to have a mix of how many hours those people are working. We have a handful of those that are closer to full-time in the mid to high thirties every week. We also have a handful of people around part-time, like 20 hours-ish a week, and usually just a few people down lower than that, like 12 to 20 hours a week.
Graham: If we let people get down there, it tends to be staff who have been with us for a really long time, and maybe they’re even transitioning into doing other things with their life but still want a presence in the shop or something. It’s nice to have their experience.
We found just practically, when you start getting down below 20, or I’d even say often 25 hours a week, it gets really hard to have people stay up to date on everything that’s going on and changing, and which tanks are down, and what pump is having trouble, or anything like that.
If there’s something new they have to learn and they’re only working eight or nine hours a week, just practically it’s been very hard to keep them in the loop and as good as the other staff members.
Ashkahn: It’s kind of like one shift. If someone just has one shift a week, in your shop it tends to be tricky for them to be as caught up as everybody else is.
Graham: Definitely, I’d say, and looking at ours it definitely is around the 20 hour week is where most of our people are, like 20 or above. Then it’s about two-thirds are in that 20 to 30 range, and then one-third is in the 30 to 40 range. It seems to be. At least the current breakdown.
Ashkahn: How many of those people have other jobs?
Graham: Quite a few. I think at least everyone who’s under that 30 hour mark, and some who are above the 30 hour mark also have other jobs that they’re working.
That’s an interesting decision. Obviously, you need to make your own decisions for your float center too.
Some of the philosophy that went into this, and a lot of it, was even less philosophy and more trial and error, was just that in the process of trying to get people who are working more full time, it means that if anything goes wrong with one of those people, or if you have to let go a full time person, another one of your full time people is sick, it’s really hard to find anyone to cover those shifts.
Obviously, the more people working full-time, the less overall people you need at all, so there’s just less hands around to actually cover those shifts.
Ashkahn: The other side of that is pretty much the less people you can run any sort of business with I think the better. With more people comes more difficulty across the board. You have to communicate between a larger group of people.
Graham: Which gets exponentially more complicated.
Ashkahn: Even small things like buying food and beer for a staff meeting becomes more expensive the more people you have. A small agile team tends to be a better general philosophy in terms of business, but you have to balance it out with making sure that your current employees can take time off if they need to take time off or go on a trip if someone wants to leave for a week and a half to go travel somewhere.
I’ve always wanted to run a business that allows that. I would hate the idea of someone not being able to go on a trip because we can’t get the shifts that they’re working covered.
Graham: It’s not like we started out with this kind of number in mind, or had all of this really planned out necessarily, but just organically growing to it. We really haven’t had to turn down many vacation requests or anything like that.
Ashkahn: Almost none. I actually can’t think of one that someone has sent in, and we’ve denied it.
Graham: And at this point the amount of shifts that you or I have to cover is none. With this current set up our managers are pretty much able to swing in to cover if any of the other staff can’t. At least for us, again, with six tanks and running a meager 24 hours a day, we seem to find our stability 20 to 40 hour range and with 12 to 14 staff.
Ashkahn: It’s still organic. We have no system in place to keep it that way or keep these numbers the same. These aren’t policies that we have or anything like that. It’s just stabilized to that over the years, and it tends to hover right around those numbers.
Okay, well as always, make sure to grab em before they’re all gone. If you guys have
other questions our there, you can always hop over to floattanksolutions.com/podcast and type them in. See you later.
Recent Podcast Episodes
Benefits of a Free Float Giveaway – DSP 315
Float On has been known throughout the years for pulling off outlandish marketing stunts with mixed success. For example, we ran a giveaway on social media back in 2014 for a full year of free floats to our lucky winner.
Derek and Ashkahn provide a follow up on the success of that campaign and talk about the primary, secondary, and tertiary benefits that came from doing such a major giveaway.
The Importance of Social Media – DSP 314
Social media seems to be the only marketing platform that anyone talks about anymore. How to do facebook ads, when to post on Instagram, how to improve Google SEO… it’s a broad topic that seems to dominate the conversation in marketing.
Ashkahn and Derek explain not only why it seems this way, but the misconception of relying too heavily on social media in marketing strategies, as well as a defense of social media as a platform.
How to not be salesy selling memberships – DSP 313
Derek and Ashkahn give the low down on pitching memberships to customers. A lot of float center owners don’t want to come off as pushy sales people after people get out of their floats.
Ashkahn sympathizes with this a lot, since that’s exactly how he felt when he first started selling memberships for Float On. He and Derek suggest a perspective shift on the idea of memberships, as lots of customers end up being appreciative of the opportunity, and don’t feel like they’re being overly pitched to.
Why is Water Treatment Important? – DSP 312
If float tank water is safe, in part because of all the salt, then why is there such a huge emphasis in the industry for water treatment? After all, there haven’t been any reports of anyone getting sick because of floating.
Ashkahn and Graham tackle this question and challenge the idea on its face, because, well, just because something hasn’t been reported doesn’t mean it doesn’t happen, and given how little is known about water treatment in float tanks, it’s a good idea, as an industry, to minimize the risk of infections and illness as much as possible. Really, there’s a lot of reasons, from peace of mind, complying with health regulation standards, and even marketing, to maintain your float tank solution to as high a standard that you can.
Soundproofing Windows of Your Float Center – DSP 311
Graham and Ashkahn discuss soundproofing windows of a float center, but first they talk about which situations may even warrant soundproofing in the first place. It may be that soundproofing is better prioritized elsewhere.
If you do decide to soundproof your window, the guys give you some tips on how best to do it and what to look for when picking out which type of glaze you may want along with a few other options.
Latest Blog Posts
What? Another Product Announcement? The New and Improved About Float Tanks Guide!
We’ve learned a lot since then, so has the industry and the rest of the world. Floating is no longer considered some obscure practice. The industry has become very well established the world over and is continuing to grow. As such, the About Float Tanks Guide in particular desperately needed updating.
There has been new research, new standards in manufacturing, and as an industry, we have a much better understanding of all things float tank.
Download the latest version today!
Announcing: The 2017 Float Tank Industry Report
In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We've released one every year since, and this year we (once again) have the most contributions that we've ever had. In total, 193 existing...
Working with a Landlord
If you’re planning on opening up a float center, it’s likely that you’ll end up renting and, therefore, working closely with a landlord. Like any business relationship, it takes communication, discernment, and openness to make a renter-landlord relationship feel truly comfortable.
Everyone involved is taking a risk and the reality is that, when it comes to floating, it’s probably more risk than your average small business – craft shop, bar, hair salon, law office, what-have-you.
This piece also includes a free download – a compilation of support letters from float center landlords!
Employees vs. Independent Contractors. Which is better when offering additional services?
Part of what makes all of this so confusing is there isn’t a one-size-fits-all set of actions that differentiates a standard employee from an independent contractor. Your State regulators, the federal Department of Labor, and the IRS all have their own criteria for what constitutes an “independent contractor”. Here, we’ll just be using the IRS definitions as a sort of jumping off point to the issue. If the status of employees is ever challenged, the IRS determines the status on a case-by-case basis over several criteria by a panel of judges, very similar to American Idol.
Basically it comes down to who is in control of the work. How much control does the company have over the type of job being done vs. how much control does the person providing the service. This manifests in different ways, but to fit the definition of an independent contractor, a service provider really does have to be independent. Beyond just using this guide, you should always consult an HR lawyer if you feel like there’s any confusion or ambiguity.
Basically, the rules fall into three main categories…
