Something in the world of floating have you stumped?
Show Highlights
How do you figure out how many people to hire? What’s the ideal hours for a float employee to work? Is there such a thing as too many hours? Too few?
Graham and Ashkahn share their insights with staffing Float On and what their staff looks like to cover all their shifts running a six tank, 24 hour float center.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: Okaly blokaly guys, welcome back to the podcast.
Graham: Today we have a good one. It’s about our staffing, “How many staff does it take to run your shop? How many hours are they working on average?”
Ashkahn: Good question, listener.
Graham: Yep. Thanks for sending that in, and we’ll talk to you all next time.
Ashkahn: Have a great evening.
How many staff does it take to run a shop? There’s two ways to answer that question. How many people do we have there at any given point in time, and how many total people do we have on staff? This sounds more like they’re asking how many total people we have on staff.
Graham: But we might as well answer both of them.
Ashkahn: We have two people on at a time at our place, and that’s a whole other conversation I think about, how many people you need working at your shop at any given point in time.
Assuming you have that part figured out, it takes us about, for a 24 hour operation like ours, with two people on staff-
Graham: And six tanks.
Ashkahn: And six tanks. We have about usually 12 to 14 employees. Somewhere in that range.
Graham: I just double-checked. We’re doing some training right now of some new people coming on, so we might lose maybe one of those? But we have 14 people right now.
Ashkahn: We always seem to hover somewhere in that range. Twelve seems to be the lowest, and 14 seems to be generally the highest that our staff pool goes. That does not involve us, so we’re not really working any hours in there.
Graham: It does involve two shop managers as well, so of those 14 right now, two are managers, and 12 are more regular shop staff.
Ashkahn: Those managers are working hours too, and when they’re working, they’re working as one of those two people, so it’s not like two people plus a manager. It’s a manager there for however many hours, and then they’ll also work hours not at the shop doing more managerial stuff.
Graham: Pretty much the only time we’ll have more than that is when we’re doing deep cleans, when more people actually makes things go faster. You can crank through more tanks at a time.
Ashkahn: Right.
Graham: Or when we’re doing training, so if we have someone who’s coming on board and doing training, then we’ll have our two regular staff and then the third person who’s training up will also be there, shadowing them and helping out and learning.
Ashkahn: With 14 people, we tend to have a mix of how many hours those people are working. We have a handful of those that are closer to full-time in the mid to high thirties every week. We also have a handful of people around part-time, like 20 hours-ish a week, and usually just a few people down lower than that, like 12 to 20 hours a week.
Graham: If we let people get down there, it tends to be staff who have been with us for a really long time, and maybe they’re even transitioning into doing other things with their life but still want a presence in the shop or something. It’s nice to have their experience.
We found just practically, when you start getting down below 20, or I’d even say often 25 hours a week, it gets really hard to have people stay up to date on everything that’s going on and changing, and which tanks are down, and what pump is having trouble, or anything like that.
If there’s something new they have to learn and they’re only working eight or nine hours a week, just practically it’s been very hard to keep them in the loop and as good as the other staff members.
Ashkahn: It’s kind of like one shift. If someone just has one shift a week, in your shop it tends to be tricky for them to be as caught up as everybody else is.
Graham: Definitely, I’d say, and looking at ours it definitely is around the 20 hour week is where most of our people are, like 20 or above. Then it’s about two-thirds are in that 20 to 30 range, and then one-third is in the 30 to 40 range. It seems to be. At least the current breakdown.
Ashkahn: How many of those people have other jobs?
Graham: Quite a few. I think at least everyone who’s under that 30 hour mark, and some who are above the 30 hour mark also have other jobs that they’re working.
That’s an interesting decision. Obviously, you need to make your own decisions for your float center too.
Some of the philosophy that went into this, and a lot of it, was even less philosophy and more trial and error, was just that in the process of trying to get people who are working more full time, it means that if anything goes wrong with one of those people, or if you have to let go a full time person, another one of your full time people is sick, it’s really hard to find anyone to cover those shifts.
Obviously, the more people working full-time, the less overall people you need at all, so there’s just less hands around to actually cover those shifts.
Ashkahn: The other side of that is pretty much the less people you can run any sort of business with I think the better. With more people comes more difficulty across the board. You have to communicate between a larger group of people.
Graham: Which gets exponentially more complicated.
Ashkahn: Even small things like buying food and beer for a staff meeting becomes more expensive the more people you have. A small agile team tends to be a better general philosophy in terms of business, but you have to balance it out with making sure that your current employees can take time off if they need to take time off or go on a trip if someone wants to leave for a week and a half to go travel somewhere.
I’ve always wanted to run a business that allows that. I would hate the idea of someone not being able to go on a trip because we can’t get the shifts that they’re working covered.
Graham: It’s not like we started out with this kind of number in mind, or had all of this really planned out necessarily, but just organically growing to it. We really haven’t had to turn down many vacation requests or anything like that.
Ashkahn: Almost none. I actually can’t think of one that someone has sent in, and we’ve denied it.
Graham: And at this point the amount of shifts that you or I have to cover is none. With this current set up our managers are pretty much able to swing in to cover if any of the other staff can’t. At least for us, again, with six tanks and running a meager 24 hours a day, we seem to find our stability 20 to 40 hour range and with 12 to 14 staff.
Ashkahn: It’s still organic. We have no system in place to keep it that way or keep these numbers the same. These aren’t policies that we have or anything like that. It’s just stabilized to that over the years, and it tends to hover right around those numbers.
Okay, well as always, make sure to grab em before they’re all gone. If you guys have
other questions our there, you can always hop over to floattanksolutions.com/podcast and type them in. See you later.
Recent Podcast Episodes
How Hot is Too Hot in a Float Tank? – DSP 280
Graham goes solo again to discuss how people perceive temperature in the float tank.
This is an important issue specifically because of a few pieces of technical information that your average customer just isn’t going to know, largely how humidity impacts temperature, but also how easy it is to overheat in an incredibly humid environment.
Why Shouldn’t Float Rooms Have Cement Backer Board? – DSP 279
Graham goes solo today while awaiting Ashkahn’s return.
Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.
What to do when People have Really Bad Floats – DSP 278
With Ashkahn still taking his post-conference vacation, Graham and Juliet talk about what it’s like to have unpleasant floats.
Juliet shares her perspective in dealing with her anxiety condition while floating and how it can sometimes hinder the experience. Graham approaches it as an owner as well as someone who’s never experienced those kinds of hindrances in the tank.
How do you Prepare for a Float? – DSP 277
Some people have special ways that they prepare for floating, and how it’s approached depends entirely on the person floating.
Graham and Juliet (Ashkahn’s still missing) talk about their different approaches to floating, whether it’s sneaking in to float whenever they can, or planning entire days around floating to make sure it goes off without a hitch, they share their perspectives.
How to Talk about Floating to those Unfamiliar with it – DSP 276
Ashkahn is gallivanting across Europe (probably), so Graham has Juliet on the podcast today.
The two of them talk about how to talk about floating, from the float center perspective, and the floater perspective, how much information is enough, and how much is too much. This is a spiel that every person in the float industry will have tons of practice on, so it’s important to have a good one.
Latest Blog Posts
Sleeping Bag Drive: Filling Float Tanks While Helping the Homeless
Sitting in our regular Float On marketing meeting, we were strategizing about our next free float giveaway, and we quickly switched the conversation to focus less on our own minor woes (ahem, first world problems) and more on how we can help those in need. Despite the fact that Portland had its warmest November of all time, temperatures plunged to all-time lows in December and January. The team came together and voted on the idea of holding a sleeping bag drive.
How Floating Helped Me Accept I Was Trans
“I’ve often heard strong advocates of floating question why people might have difficult floats, “what’s wrong with spending time alone with yourself?” When you love yourself, it’s easy to be alone with your thoughts – when you hate who you are and can’t understand why, it can be a nightmare.” – Juliet Tango Mylan
Accurate H2O2 Readings in Float Tanks – an Approved Test Kit
There’s some exciting news out there for anyone who is using hydrogen peroxide in their float tanks. Taylor Technologies, launching into a brilliant meta-testing endeavor, has tested their own H2O2 testing kits…in saturated epsom salt water! After only a year of them...
Center of the Cyclone Book Launch
Coincidence Control Publishing is pleased to announce the updated publishing of John C. Lilly’s Center of the Cyclone. Written by a researcher whose methods of self inquiry and exploration were before his time, this 45th anniversary edition, released on Lilly’s birthday, is due to see the light of day once more.
You can buy the book now on Amazon!