Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

How do you figure out how many people to hire? What’s the ideal hours for a float employee to work? Is there such a thing as too many hours? Too few?

Graham and Ashkahn share their insights with staffing Float On and what their staff looks like to cover all their shifts running a six tank, 24 hour float center.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Ashkahn: Okaly blokaly guys, welcome back to the podcast.

Graham: Today we have a good one. It’s about our staffing, “How many staff does it take to run your shop? How many hours are they working on average?

Ashkahn: Good question, listener.

Graham: Yep. Thanks for sending that in, and we’ll talk to you all next time.

Ashkahn: Have a great evening.

How many staff does it take to run a shop? There’s two ways to answer that question. How many people do we have there at any given point in time, and how many total people do we have on staff? This sounds more like they’re asking how many total people we have on staff.

Graham: But we might as well answer both of them.

Ashkahn: We have two people on at a time at our place, and that’s a whole other conversation I think about, how many people you need working at your shop at any given point in time.

Assuming you have that part figured out, it takes us about, for a 24 hour operation like ours, with two people on staff-

Graham: And six tanks.

Ashkahn: And six tanks. We have about usually 12 to 14 employees. Somewhere in that range.

Graham: I just double-checked. We’re doing some training right now of some new people coming on, so we might lose maybe one of those? But we have 14 people right now.

Ashkahn: We always seem to hover somewhere in that range. Twelve seems to be the lowest, and 14 seems to be generally the highest that our staff pool goes. That does not involve us, so we’re not really working any hours in there.

Graham: It does involve two shop managers as well, so of those 14 right now, two are managers, and 12 are more regular shop staff.

Ashkahn: Those managers are working hours too, and when they’re working, they’re working as one of those two people, so it’s not like two people plus a manager. It’s a manager there for however many hours, and then they’ll also work hours not at the shop doing more managerial stuff.

Graham: Pretty much the only time we’ll have more than that is when we’re doing deep cleans, when more people actually makes things go faster. You can crank through more tanks at a time.

Ashkahn: Right.

Graham: Or when we’re doing training, so if we have someone who’s coming on board and doing training, then we’ll have our two regular staff and then the third person who’s training up will also be there, shadowing them and helping out and learning.

Ashkahn: With 14 people, we tend to have a mix of how many hours those people are working. We have a handful of those that are closer to full-time in the mid to high thirties every week. We also have a handful of people around part-time, like 20 hours-ish a week, and usually just a few people down lower than that, like 12 to 20 hours a week.

Graham: If we let people get down there, it tends to be staff who have been with us for a really long time, and maybe they’re even transitioning into doing other things with their life but still want a presence in the shop or something. It’s nice to have their experience.

We found just practically, when you start getting down below 20, or I’d even say often 25 hours a week, it gets really hard to have people stay up to date on everything that’s going on and changing, and which tanks are down, and what pump is having trouble, or anything like that.

If there’s something new they have to learn and they’re only working eight or nine hours a week, just practically it’s been very hard to keep them in the loop and as good as the other staff members.

Ashkahn: It’s kind of like one shift. If someone just has one shift a week, in your shop it tends to be tricky for them to be as caught up as everybody else is.

Graham: Definitely, I’d say, and looking at ours it definitely is around the 20 hour week is where most of our people are, like 20 or above. Then it’s about two-thirds are in that 20 to 30 range, and then one-third is in the 30 to 40 range. It seems to be. At least the current breakdown.

Ashkahn: How many of those people have other jobs?

Graham: Quite a few. I think at least everyone who’s under that 30 hour mark, and some who are above the 30 hour mark also have other jobs that they’re working.

That’s an interesting decision. Obviously, you need to make your own decisions for your float center too.

Some of the philosophy that went into this, and a lot of it, was even less philosophy and more trial and error, was just that in the process of trying to get people who are working more full time, it means that if anything goes wrong with one of those people, or if you have to let go a full time person, another one of your full time people is sick, it’s really hard to find anyone to cover those shifts.

Obviously, the more people working full-time, the less overall people you need at all, so there’s just less hands around to actually cover those shifts.

Ashkahn: The other side of that is pretty much the less people you can run any sort of business with I think the better. With more people comes more difficulty across the board. You have to communicate between a larger group of people.

Graham: Which gets exponentially more complicated.

Ashkahn: Even small things like buying food and beer for a staff meeting becomes more expensive the more people you have. A small agile team tends to be a better general philosophy in terms of business, but you have to balance it out with making sure that your current employees can take time off if they need to take time off or go on a trip if someone wants to leave for a week and a half to go travel somewhere.

I’ve always wanted to run a business that allows that. I would hate the idea of someone not being able to go on a trip because we can’t get the shifts that they’re working covered.

Graham: It’s not like we started out with this kind of number in mind, or had all of this really planned out necessarily, but just organically growing to it. We really haven’t had to turn down many vacation requests or anything like that.

Ashkahn: Almost none. I actually can’t think of one that someone has sent in, and we’ve denied it.

Graham: And at this point the amount of shifts that you or I have to cover is none. With this current set up our managers are pretty much able to swing in to cover if any of the other staff can’t. At least for us, again, with six tanks and running a meager 24 hours a day, we seem to find our stability 20 to 40 hour range and with 12 to 14 staff.

Ashkahn: It’s still organic. We have no system in place to keep it that way or keep these numbers the same. These aren’t policies that we have or anything like that. It’s just stabilized to that over the years, and it tends to hover right around those numbers.

Okay, well as always, make sure to grab em before they’re all gone.  If you guys have

other questions our there, you can always hop over to floattanksolutions.com/podcast and type them in. See you later.

Recent Podcast Episodes

Why Do Float Centers use Child Sized Earplugs? – DSP 245

When shopping around for earplugs for float tanks, there’s only a few that actually work well in the float solution. One of these is the Mack’s wax earplugs, basically the standard for swimmers as well. But why do so many float centers buy the child sized ones when stocking their float center?

Ashkahn “Big Ears” Jahromi let’s all of us know what he thinks is going on and that many people may be using these earplugs incorrectly. Graham “Normal Ears” Talley, backs him up with some facts and important reminders.

What Causes that Float Tank Twitch? – DSP 244

Graham and Ashkahn discuss what causes that mysterious twitch people sometimes experience in the float tank, called the hypnic jerk (AKA hypnagogic jerk, sleep start, sleep twitch, myoclonic jerk, or night start ). While the guys offer up some interesting theories, there’s not a lot of research that’s been done on what causes these, so we’re left with theories, more or less.

Ashkahn thinks it has to do with pancakes.

Does floating impact the Parasympathetic Nervous System? – DSP 243

The Parasympathetic Nervous System is the part of your body that gets really excited when the rest of your body is winding down. Taking care of the digestive and rest systems are an important part of human health and physiology. How do float tanks affect this system?

Many of the studies on floating have demonstrated an impact on the parasympathetic nervous system. Graham and Ashkahn talk about the information that’s been studied so far.

Getting Salty With Speakers – Professor Hu – DSP 242

Dr. Peicheng Hu is a researcher from China that studies floatation therapy over there. He’s speaking at the Float Conference this year so Ashkahn decided to take the opportunity to talk to him about the Chinese float industry and some of the differences in the practice as well as the type of research being done out there. 

Are Google Ads Important – DSP 241

When looking at online marketing, Google Ads seem like an obvious choice, but are as relevant for Float Centers as they are for other businesses? The most useful thing these ads do is boost search result placement, but if the ads are to boost the ranking of a float center that is the only center in town, it’s not going to affect search results much.

Derek and Graham dissect the platform and really focus in on the uses (or lack thereof) of Google Ads for float centers and provide tools and tips for online marketing and how to make it as effective as possible.

Latest Blog Posts

Fancy Acronyms for your Business Plan: TAM, SAM, and SOM

Fancy Acronyms for your Business Plan: TAM, SAM, and SOM

In this post, we’ll be looking at those enigmatic acronyms: TAM, SAM, and SOM, which are the backbone for the market analysis section of your written plan. We’ve helped a couple hundred float centers to develop their business plans, and we’ve found that this one area generates the most questions, and seems to generally be the most difficult to wrap your head around.

The Float Tour Blog – Issue #9

The Float Tour Blog – Issue #9

The Float Tour makes a stop in Tulsa, OK to visit Dr. Justin Feinstein’s Float Clinic and Research Center at the Laureate Institute of Brain Research (LIBR).

Rather than following the usual path of incremental progress with its research, LIBR is tasked with pursuing alternative treatments that have a chance of “shooting the moon” and making potentially large leaps in medical progress. Float tanks are just the kind of technology they’re looking to explore.

Float Tank Centers for Sale

Float Tank Centers for Sale

On our journey we found at least three owners who are actively looking to sell their float tank centers, and in all three cases the centers are doing well. Life often calls us in different directions than we expect.

In case you’re in the market for a pre-established business, without all the trials and tribulations of starting from scratch, here’s information on two centers that are, for the moment, available to swoop in on…

The Float Tour Blog – Issue #8

The Float Tour Blog – Issue #8

The desert is vast and the sun is harsh, but it doesn’t deter floating. We’re officially off the beaten path. From here, the float centers have become a bit more spread out. Everywhere we go, however, the people continue to be kind and eager to see us.

Everything in between Arizona and Texas is nestled in between some of the major manufacturers in the United States, providing some resources that other areas just don’t have. Areas that might find building out a center prohibitively expensive due to additional shipping costs, not to mention that real estate is cheaper than in major metropolitan areas, can save a bit of money when planning their buildout.