Something in the world of floating have you stumped?
Show Highlights
How do you figure out how many people to hire? What’s the ideal hours for a float employee to work? Is there such a thing as too many hours? Too few?
Graham and Ashkahn share their insights with staffing Float On and what their staff looks like to cover all their shifts running a six tank, 24 hour float center.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: Okaly blokaly guys, welcome back to the podcast.
Graham: Today we have a good one. It’s about our staffing, “How many staff does it take to run your shop? How many hours are they working on average?”
Ashkahn: Good question, listener.
Graham: Yep. Thanks for sending that in, and we’ll talk to you all next time.
Ashkahn: Have a great evening.
How many staff does it take to run a shop? There’s two ways to answer that question. How many people do we have there at any given point in time, and how many total people do we have on staff? This sounds more like they’re asking how many total people we have on staff.
Graham: But we might as well answer both of them.
Ashkahn: We have two people on at a time at our place, and that’s a whole other conversation I think about, how many people you need working at your shop at any given point in time.
Assuming you have that part figured out, it takes us about, for a 24 hour operation like ours, with two people on staff-
Graham: And six tanks.
Ashkahn: And six tanks. We have about usually 12 to 14 employees. Somewhere in that range.
Graham: I just double-checked. We’re doing some training right now of some new people coming on, so we might lose maybe one of those? But we have 14 people right now.
Ashkahn: We always seem to hover somewhere in that range. Twelve seems to be the lowest, and 14 seems to be generally the highest that our staff pool goes. That does not involve us, so we’re not really working any hours in there.
Graham: It does involve two shop managers as well, so of those 14 right now, two are managers, and 12 are more regular shop staff.
Ashkahn: Those managers are working hours too, and when they’re working, they’re working as one of those two people, so it’s not like two people plus a manager. It’s a manager there for however many hours, and then they’ll also work hours not at the shop doing more managerial stuff.
Graham: Pretty much the only time we’ll have more than that is when we’re doing deep cleans, when more people actually makes things go faster. You can crank through more tanks at a time.
Ashkahn: Right.
Graham: Or when we’re doing training, so if we have someone who’s coming on board and doing training, then we’ll have our two regular staff and then the third person who’s training up will also be there, shadowing them and helping out and learning.
Ashkahn: With 14 people, we tend to have a mix of how many hours those people are working. We have a handful of those that are closer to full-time in the mid to high thirties every week. We also have a handful of people around part-time, like 20 hours-ish a week, and usually just a few people down lower than that, like 12 to 20 hours a week.
Graham: If we let people get down there, it tends to be staff who have been with us for a really long time, and maybe they’re even transitioning into doing other things with their life but still want a presence in the shop or something. It’s nice to have their experience.
We found just practically, when you start getting down below 20, or I’d even say often 25 hours a week, it gets really hard to have people stay up to date on everything that’s going on and changing, and which tanks are down, and what pump is having trouble, or anything like that.
If there’s something new they have to learn and they’re only working eight or nine hours a week, just practically it’s been very hard to keep them in the loop and as good as the other staff members.
Ashkahn: It’s kind of like one shift. If someone just has one shift a week, in your shop it tends to be tricky for them to be as caught up as everybody else is.
Graham: Definitely, I’d say, and looking at ours it definitely is around the 20 hour week is where most of our people are, like 20 or above. Then it’s about two-thirds are in that 20 to 30 range, and then one-third is in the 30 to 40 range. It seems to be. At least the current breakdown.
Ashkahn: How many of those people have other jobs?
Graham: Quite a few. I think at least everyone who’s under that 30 hour mark, and some who are above the 30 hour mark also have other jobs that they’re working.
That’s an interesting decision. Obviously, you need to make your own decisions for your float center too.
Some of the philosophy that went into this, and a lot of it, was even less philosophy and more trial and error, was just that in the process of trying to get people who are working more full time, it means that if anything goes wrong with one of those people, or if you have to let go a full time person, another one of your full time people is sick, it’s really hard to find anyone to cover those shifts.
Obviously, the more people working full-time, the less overall people you need at all, so there’s just less hands around to actually cover those shifts.
Ashkahn: The other side of that is pretty much the less people you can run any sort of business with I think the better. With more people comes more difficulty across the board. You have to communicate between a larger group of people.
Graham: Which gets exponentially more complicated.
Ashkahn: Even small things like buying food and beer for a staff meeting becomes more expensive the more people you have. A small agile team tends to be a better general philosophy in terms of business, but you have to balance it out with making sure that your current employees can take time off if they need to take time off or go on a trip if someone wants to leave for a week and a half to go travel somewhere.
I’ve always wanted to run a business that allows that. I would hate the idea of someone not being able to go on a trip because we can’t get the shifts that they’re working covered.
Graham: It’s not like we started out with this kind of number in mind, or had all of this really planned out necessarily, but just organically growing to it. We really haven’t had to turn down many vacation requests or anything like that.
Ashkahn: Almost none. I actually can’t think of one that someone has sent in, and we’ve denied it.
Graham: And at this point the amount of shifts that you or I have to cover is none. With this current set up our managers are pretty much able to swing in to cover if any of the other staff can’t. At least for us, again, with six tanks and running a meager 24 hours a day, we seem to find our stability 20 to 40 hour range and with 12 to 14 staff.
Ashkahn: It’s still organic. We have no system in place to keep it that way or keep these numbers the same. These aren’t policies that we have or anything like that. It’s just stabilized to that over the years, and it tends to hover right around those numbers.
Okay, well as always, make sure to grab em before they’re all gone. If you guys have
other questions our there, you can always hop over to floattanksolutions.com/podcast and type them in. See you later.
Recent Podcast Episodes
How do Float Centers Incorporate Massage? – DSP 210
What’s the best policy for a float center that wants to add massage? Do they hire on the Licensed Massage Therapist (LMT) as an employee, or do they bring them on as an independent contractor? Or what about just letting them rent a room in their business and not having to worry about it.
Dylan Calm of The Art of the Float podcast is in the studio with Ashkahn and Graham to discuss this issue, since his float center, The Float Shoppe, offers massage as well as other services, unlike Float On.
Can You Wear Jewelry in a Float Tank? – DSP 209
Sometimes people wear jewelry. Sometimes people float. What happens when these things overlap? What about piercings?
Graham and Ashkahn concisely explain why it’s a good idea to take that wedding ring off before you float in this episode.
What’re the Benefits of Financial Transparency for a Float Center? – DSP 208
There’s a traditional wisdom in business that dictates certain information should be held close to the vest. Financial information, hiring information, performance metrics, and so on should only be shared on a need to know basis. More recently, there’s been a push for more businesses to have transparency in some of these areas.
Ashkahn and Graham explain their stance on transparency and the thought process behind making Float On as transparent as possible, as well as many of the benefits they see on a regular basis because of it.
How to Prevent Losing Members to Cheap Discounts – DSP 207
Many float centers rely on memberships, usually monthly, to help maintain a steady flow of income throughout the year. Sometimes that’s not enough, like during slow months, and a steep discount can seem really attractive for filling up float tanks. What’s the best solution to making sure that you aren’t cannibalizing your own sales with discounts and potentially losing members?
Graham and Ashkahn share their tried and true approach to this nuanced question and share some excellent examples of how Float On rewards its members without losing sales during discounts as well as throughout the rest of the year.
Dealing with Low Flow After Installing a Flow Meter – DSP 206
Flow meters are designed to measure how quickly water travels through a filtration system. This is useful for all sorts of recreational water facilities. Pools and spas have been using them for years. Often times health departments will require them for float tanks, as they help provide a certain level of assurance to the filtration quality of a system.
The problem arises when using flow meters that aren’t designed to handle the specific gravity of float tank solution. So far, only one flow meter is designed to be accurate for float tanks and if a system isn’t using that one, it can be a bit surprising to find out that the flow is different. Ashkahn and Graham talk all about the reason for flow meters and how to troubleshoot problems that may cause a loss of flow.
Latest Blog Posts
Handling Tough Decisions…
I’ve written the introduction to the conference program for four years in a row, and each year I like to share it on this blog. For those of you who didn’t make it out for the 2015 Float Conference, here are a few of my thoughts on the work that float center owners do, and the questions they may face in running a float tank center.
How to Drain and Fill a Float Tank
There are roughly 850 pounds of epsom salt and 200 gallons of waters in an average sized float tank (approximately 8 feet long and 4 feet wide). It takes hard work (and a few tips I’m about to share) to get a tank ready for floating.
The Whys and Hows of Email Marketing
A trending strategy when a small business goes to market is that social media marketing becomes their main focal point. On the surface, social media marketing is easy to get started with, the costs can be nil, and most people are already using it for personal use. The...
How to Deal with a Power Outage in your Float Center
Power Outages = Unplanned Sensory Deprivation It only took a day since the publishing of my last blog post before I would have to put my knowledge of unconventional ways of waking up floaters to the test. The incident did not involve “sinkers” those individuals who...
