Something in the world of floating have you stumped?
Show Highlights
When setting up your float tank, it can be tempting to look at the spa pack and imagine how much more convenient it would be if the pieces were rearranged a little bit. So… is there a particular order to the filtration equipment? Why or why not?
Fortunately, Graham and Ashkahn have painfully researched this issue and know all the ins and outs of water treatment systems for float tanks and why they are the way they are.
Show Resources
FTS Blog – The Basics of Float Tank Sanitation
FTS Product – Intro to Water Treatment Course (Free)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “I was looking at all of the stuff attached to my float tank, and wondering if the order that the filtration equipment goes in matters? Is there a reason the pump is coming before the filter?”
Ashkahn: Okay, yes.
Graham: There totally is. Don’t mess with that yourself, you know? Leave it to the professionals.
Ashkahn: Yeah, like are you going to be rearranging it? What’s going on here? Yeah, these things are generally placed in a specific order, and you typically see them in the same order when you look at not just float tanks, pools, spas, hot tubs, all that sort of stuff.
Graham: And it’s totally arbitrary, there’s actually no reason for those, just everyone kind of decided to do it one day.
Ashkahn: One dude did it the first time, and then everyone’s been doing that, so.
Graham: No, That’s not true.
Ashkahn: So here’s how it goes: you guys ready?
Graham: Yeah, lay it down, Papa Kahn.
Ashkahn: Basically, the water’s being sucked out of your float tank at some place, and often, the first thing you see is the pump. Sometimes, the only thing you see before that is that little like strainer basket thing. Sometimes, these are connected to pumps, sometimes, they’re plumbed as a separate piece. They’re called hair and lint pots or leaf traps, or all sorts of different names like that, referring to.
Graham: Yeah, depending on whether they’re used indoors or outdoors, I guess.
Ashkahn: And that’s basically, you know, to catch big things so that they don’t go through your pump and the rest of your filtration system, so that obviously wants to come before the pump.
Graham: Hair, earplugs, pine cones.
Ashkahn: There are like leaves and rocks, are what they’re used for in other settings. So, you know, that’s kind of the first thing in line to try to grab big stuff, if that makes sense. And usually, the next thing you see is the pump. And pumps, their kind of force is in a suction side of things. Like they’re sucking water in, is kind of the way they’re doing things, and that force is pushing it through the rest of the system. And so they typically don’t like to have to suck water through too much other stuff. So, as a result, you usually see the pump be the first thing so it can get, you know, the water moving, and push it through the rest of the system.
Graham: And I was also surprised at that when I was first learning about the order of things. Because it really seems like you’d want the pump after the filter, if that’s at all possible, right? Like it’s like a big hair and lint trap, right? Like throw in the pump after the filter if you can, just means everything gets filtered before it goes in there.
Ashkahn: Uh-huh.
Graham: Less chance of things getting stuck.
Ashkahn: Less hair, specifically going in.
Graham: Yeah, yeah, yeah exactly. But, yeah, that’s not.
Ashkahn: It just seems to put too much, a little bit of strain on the pump if it has to suck through a filter media or something like that.
Graham: It’s like sucking out of your glass through a really long straw.
Ashkahn: Uh-huh.
Graham: Like it’s just not as smooth, yeah.
Ashkahn: We have a piece of cotton at the end of it. So, you have the pump, sometimes you have the hair and lint trap if you have one of those, then it goes the pump, and then, often what you see after that if you have a flow meter is the flow meter. Certain flow meters really wanna go directly after the pump, other ones wanna go in different places, other ones don’t care about where they go. But, that’s kind of the most conventional place you see it, is right after the pump. You see, if you have one, a flow meter. And then, you get into the actual, at this point, like all that’s happened is we’re moving water. And if you, have a flow meter, you’re seeing how fast it’s moving. Like that’s all that’s going on so far. So now, we’re actually getting to the point where the solution, or the liquid, is being cleaned in some way. And basically, you have two different types of cleaning. You have an actual filter that’s filtering physical stuff: hair, skin cells, oils, things like that. And you have some sort of treatment system that’s dealing with microorganisms.
Graham: UV, Ozone, bromine feeder, something like that.
Ashkahn: Right, killing things like E. Coli. And so, generally, the way that you see it is that treatment system goes after the physical filter. And that’s just because you want your treatment system to be as effective as it can be. So, if you’re trying to treat the solution before the filter, then, you’re trying to kill all sorts of stuff that’s just about to be caught in a filter. Or it’s kind of dirtier than it needs to be. The hair can obstruct, the oils can obstruct things like UV penetration, the chlorine can be eaten up by trying to get onto all that stuff. Hydrogen peroxide, all that sort of stuff. So it’s kind of like filter first, get as much of the gunk that the filter can stop out of the way before we start hitting it with kind of these treatment systems to deal with these different microorganisms. And then, at the point that you’re there, with the treatment system, depending on what you have, you kinda want to do things in different orders. So, often if you’re using UV and Ozone together, people like to put the Ozone in before the UV system. Because, you know, if there is any hydroxyl radicals being formed from the Ozone and the UV interacting, then, you obviously want the Ozone in the system when it’s in the UV chamber. So that’s kind of the method they’ll go about doing it.
If you have chlorine or bromine that you’re using and you have a UV unit, a lot of times, mostly what you see, is people putting in the chlorine or bromine after the UV because UV can actually eat up some chlorine. So kind of ideally, what you’re doing is hitting the UV and then injecting it with chlorine so you’re not kind of diminishing the chlorine you’re putting right into the system.
Graham: Yep, and I think that actually the chlorine and bromine feeders tend to go the very last in the system, almost regardless. Like that’s kind of the last thing that you want to happen at the end of all the equipment.
Ashkahn: Which makes sense because they’re a residual. You kind of just want them out, mixed into the whole thing, doing what they’re doing out in the whatever, pool, spa, if it’s in a float tank, in the float tank. That kind of logic makes a little bit more sense for pools and spas, where there’s actually a big body of water that needs a residual.
Graham: It’s not getting sucked back up immediately three minutes later, yeah, yeah.
Ashkahn: Yeah, exactly. But that’s the general idea, you wanna filter everything, then you wanna put the chlorine in so that it’s kinda, it’s not being used up by anything else as it’s passing through the system. So, even things like heaters, a lot of pools have heaters. Some float tanks have in-line heaters. We’ll often go before injecting chlorine or bromine. And you know in kind of most float tanks, that’s pretty much all of the equipment, and then it just plumbs right back into the system.
Graham: Yep, that’s the bulk of it. I couldn’t even, I was trying to think of some joke of something else we could catch on there, you know? But nothing was coming to mind, so I guess we can just let it slide this time.
Ashkahn: So yeah, I think that’s generally the order here. You have the pump, is the first thing, with maybe something before it to catch big objects, the flow meter typically after it to kind of track how fast the liquid is moving. Then, you’re doing the physical filtration to try to kind of do a first pass, get a bunch of gunk out, then you’re doing your treatment system in a specific order, depending on what combination of things you’re using. Then, you get that right back in the float tank.
Graham: Alright, and if you have other questions, shoot ’em over our way. Go to floattanksolutions.com/podcast, and I mean you, if you’re listening to this, you go over there right now. You go over there, and you send us a question.
Recent Podcast Episodes
Common Float Tank Issues – DSP 295
Graham and Ashkahn give the skinny on the foibles one my encounter when purchasing a float tank. These aren’t specific to any one manufacturer, but they are useful things to look out for when shopping around for a tank.
What is Float On’s North Star Metric? – DSP 294
Graham and Ashkahn talk about the guiding principles and metrics that dictate how they run Float On and what they measure for success. While they don’t have any float center secrets, they do provide some useful advice in how to look at numbers, when to pay attention to them, and perhaps more importantly, when to ignore them.
What Can you Say About Float Centers Closing? – DSP 293
It happens every once in a while that a center you knew closes down and it can seem like a dark omen for the rest of the industry. The reality is that these are individual circumstances that are brought about not because of a major trend as much as just life events coming up.
Graham and Ashkahn share their take on other float centers closing and what they know about it and how frequently they think it’s occurring.
How to Build a Green Float Center – DSP 292
Graham and Ashkahn talk about the options available for sustainable options when building a float center, or more accurately, the lack thereof. Unfortunately, the materials necessary to make a float room saltproof and waterproof tend to be very unfriendly for the environment.
The guys break down the specific options available and what to consider when adding green technology to your own center.
How We Financed Float On – DSP 291
Graham and Ashkahn are asked about how they financed Float On.
As the guys explain how they started, they go along slight detours to talk about all the mistakes they made along the way and how they’re unsure that Float On could even start today like it did back in 2010. They then go on to explain the pros and cons of the extreme bootstrapping they did to make Float On happen.
Latest Blog Posts
The Heart of Floating – Guest Post by Kevin McCulloch
“When we commit to The Heart of Floating, we form relationships and communities. We share experiences, we connect, we learn, we teach. We care.”
In this guest post, Kevin McCulloch, owner of Float St. Louis and organizer of the Rise: Float Community Gathering, explores the heart of floating and it’s power and potential to connect, heal, and grow individuals, relationships, and communities.
The Most Ambitious Float On Project Yet
We have a new endeavor that we’ve been working on in private for awhile now, and we think that it’s going to make a big splash in our salty little industry. After many years of testing behind closed doors, we’re finally ready to take the plunge and release our secret project to you, the floatation community.
You might want to sit down for this one….
The Start-a-Center Giveaway Returns!
Everyone knows that, when it comes to gifts, it’s much more fun to give than to receive. With this year’s Start-a-Center Giveaway, however, I’m not so sure anymore. With over $13,000 in Float Tank Solutions products going to one lucky duck (plus $4,000 worth of goodies from other float industry homies), we humbly suggest that we may have finally tipped the scales in favor of the recipient.
If you’re Charlie, this Giveaway is the Golden Ticket, which I guess makes the Construction Package a Wonka bar and the Ninja Fans are the Fizzy Lifting Drink. So, what do you have to do for a chance at all the Everlasting Gobstoppers?
It’s been three years since our last Giveaway, and we thought that it was long overdue for another one. So, what’s the dealio? The Giveaway is a chance to give a big ol’ boost to a deserving Float-Center-To-Be. This time around, we’re taking things to a whole new level, with over three times the value of products and services being given away. To you. For free.
Dear Everyone: Please reconsider building your own tanks
Look, we get it. Really. Float tanks are expensive – especially for what can seem, from the outside, like a glorified bathtub with spa parts attached. It doesn’t take long to go from, “Why is this so expensive?” to “I’ll bet I could save money by making my own tank!” After you start mulling it over, you get excited. You could be offering something no one else does right now… because it’d be your own creation! How hard can it possibly be?
As experts in only thinking about half of the consequences of our actions (at best), we’d like to say, “Incredibly hard, actually!”
