These are challenging times for all of us, and many float centers (ourselves included) have decided to temporarily shut down to help stop the spread of coronavirus. Our team got together yesterday to figure out what we need to do to put our shop into hibernation mode, and we thought we’d share the list we came up with to help out anyone else who is in a similar position.
Best of luck to everyone going through this. We know we’ve seen a wellspring of kind words and support from our community when we decided to shut down, and we’re sure you have too. It’s nice to know the float world will be supported when we’re all on the other end of this.
Of course, if there’s anything that you’ve done in your own closure that you don’t see here, please send it along and we’ll update this list as suggestions come in.
Float Tank Solutions
Shop Hibernation Checklist
After the last float
- Do a full cleaning and disinfection pass across your center.
- Deal with your mail and package deliveries. You may need to put up a sign for your mail person, stop your mail from being delivered, or attempt to cancel or reroute any packages that are already on their way.
- Stop any automatic deliveries you have for any shop supplies.
- Make sure your HVAC system is set to run the whole time.
- Remove any food and beverages that can’t be stored for longer periods of time.
- Remove cash and any other valuables.
- Forward incoming calls and set up an appropriate voicemail (make a task to change the forwarding and voicemail when you re-open)
- Put bleach into washer and dishwasher and run them, then leave doors slightly open
- Consider putting out ant traps, if it’s appropriate for your area
Daily Ongoing Maintenance
- If your float tank doesn’t automatically run your pumps, go in twice a day to run them. This will both provide your float solution with its cleaning cycle, and prevent any salt crystallization from happening inside of your pipes and filtration equipment. Make sure to open the doors on your float tanks to let them air out while you’re there.
- Balance any levels of chemical treatment that you use (like hydrogen peroxide)
- Run the showers once a day to prevent any sort of buildup in the pipes
- Make sure to put water down all of your floor drains to keep your p-traps filled (so you don’t get sewer gas coming out)
- Empty your dehumidifiers (if you have any)
- Consider leaving some lobby lights on to deter vandalism
- Clean up any garbage outside the shop. It’ll help keep your city looking nice, and will also help deter vandalism.
- Answer voicemails
- Answer emails
- Answer social media inquires
- Collect physical mail
- Water any plants you may have (or take them to your house).
Weekly Ongoing Maintenance
- Replenish any water in your tanks that has been lost to evaporation (you may need to add a little salt as well).
- Do a disinfection pass on the inside of your tank walls and ceiling. It’s still a very hot and humid environment, and you want to make sure you’re preventing any mold growth.
There are, of course, other things to consider like communication with your customers and taking care of your members. You may be looking at laying off part, or all, of your staff temporarily so they can claim unemployment benefits. The next couple weeks are also going to be a good time to work on your marketing, to make sure that your customers are ready to float when you re-open.
We’re keeping the list above to just the operational side of things for now, but we’ll be releasing more over the coming days and weeks about what we’re doing at Float On to get through this.
Stay well,
Graham and Ashkahn
Putting a Shower in A Separate Room – DSP 334
Most float centers run a tight schedule with narrow margins for the transitions between floats. Oftentimes relying on their customers to take reasonably timed showers to fit that schedule. If a single customer takes a shower that’s a bit too long, it can throw of the schedule for the rest of the day!
What if showers were in a separate room? Then customers could shower as long as they want! Ashkahn and Graham explain why this is an extremely bad idea.
Having Doors Open into the Hallway – DSP 333
Float centers, more so than some other brick and mortar businesses, tend to be desperate for maximizing the efficiency of their space. And float rooms would have so much extra space if they didn’t have to deal with a door swinging in and out all the time. Why don’t float centers do it this way instead?
Well… Graham and Ashkahn explain exactly why centers don’t do this already, along with the vast majority of other buildings being made currently. It’s likely a code violation and even if it weren’t, it’d probably be unnecessarily hazardous to travel through your center that way.
Using H2O2 Instead of Chlorine – DSP 332
Let’s say you buy a center and want to use H2O2 instead of the chlorine that was being used by the previous owner. Or maybe you want to switch over to H2O2 after using chlorine for a while. Let’s further assume that this is in compliance with your health department and your UV system is sized adequately. What else do you need to know to make this happen? Do you need to change the water?
Ashkahn and Graham lay out all the things to consider and why someone may or may not want to replace the solution in their tank at the same time as replacing the water treatment method in a float tank.
How to Sell a Float Center – DSP 331
It’s not an easy decision to sell a float center. But when you do come up to that point, what do you do? Who do you talk to and how does it work? Should you hire on a broker? What sort of timeline should you expect?
Having never sold a business, Graham and Ashkahn aren’t exactly experts on the subject, but they offer informed advice on where to sell and how long it’ll probably take.
HIPAA Compliance – DSP 330
The Health Insurance Portability and Accountability Act of 1996 (HIPAA) required the Secretary of the U.S. Department of Health and Human Services (HHS) to develop regulations protecting the privacy and security of certain health information. This means that most medical information recorded by healthcare providers has to be stored based on a certain standard of security.
This is only just now becoming an issue in the float industry as centers are starting to accept insurance and medical referrals. However, this is still extremely rare. If this is something that may affect you personally, definitely research additional resources to make sure you’re in compliance.
Getting High (on air) in Float Tanks – DSP 329
Graham and Ashkahn light one up to honestly answer what they think about people coming into float centers high.
The guys share their experiences having Float On share a wall with a dispensary and the number of problems (or lack thereof) that it has caused over the course of many years.
Sit back, grab some munchies, and enjoy the ride with these guys.
What you Need to Know about UV – DSP 328
Have you ever wondered why the UV light on a float tank needs to be replaced so often? If the light is glowing, doesn’t that mean it’s working?
Ashkahn and Graham tackle everything you need to know about UV light, how it works in a float tank, and most importantly, how it can go wrong. This episode is dense with information useful for anyone who uses UV in their float center.
What’s going on with the MAHC? – DSP 327
The Model Aquatic Health Code is a document released by the CDC and has made waves throughout the float industry as this year it included a section on the ideal health department code for float centers as well as pools and spas. Some folks are worried about this because it may mean more rigid and unruly regulations in certain areas.
It’s been a few months since its release, so Graham and Ashkahn give an update to how it has impacted the industry and what it means going forward. Also, Ashkahn learns to abuse the show notes.
Logo Copycats – DSP 326
If you’ve ever looked at a collection of logos from various float centers, they can start to look a little similar. How do you avoid this when designing your own float center logo? Is it a big deal?
Graham and Ashkahn dish on logo design, the importance of simplicity, and a not so subtle reminder that the “don’t be an asshole” rule exists for a reason.
How to Build your Mailing List – DSP 325
Graham and Ashkahn consistently emphasize the importance of mailing lists, but today they dive in deep to talk about how to build a mailing list, giving their best tips and tricks to collecting emails and how to make sure you’re getting the right people signed up.
