These are challenging times for all of us, and many float centers (ourselves included) have decided to temporarily shut down to help stop the spread of coronavirus. Our team got together yesterday to figure out what we need to do to put our shop into hibernation mode, and we thought we’d share the list we came up with to help out anyone else who is in a similar position.
Best of luck to everyone going through this. We know we’ve seen a wellspring of kind words and support from our community when we decided to shut down, and we’re sure you have too. It’s nice to know the float world will be supported when we’re all on the other end of this.
Of course, if there’s anything that you’ve done in your own closure that you don’t see here, please send it along and we’ll update this list as suggestions come in.
Float Tank Solutions
Shop Hibernation Checklist
After the last float
- Do a full cleaning and disinfection pass across your center.
- Deal with your mail and package deliveries. You may need to put up a sign for your mail person, stop your mail from being delivered, or attempt to cancel or reroute any packages that are already on their way.
- Stop any automatic deliveries you have for any shop supplies.
- Make sure your HVAC system is set to run the whole time.
- Remove any food and beverages that can’t be stored for longer periods of time.
- Remove cash and any other valuables.
- Forward incoming calls and set up an appropriate voicemail (make a task to change the forwarding and voicemail when you re-open)
- Put bleach into washer and dishwasher and run them, then leave doors slightly open
- Consider putting out ant traps, if it’s appropriate for your area
Daily Ongoing Maintenance
- If your float tank doesn’t automatically run your pumps, go in twice a day to run them. This will both provide your float solution with its cleaning cycle, and prevent any salt crystallization from happening inside of your pipes and filtration equipment. Make sure to open the doors on your float tanks to let them air out while you’re there.
- Balance any levels of chemical treatment that you use (like hydrogen peroxide)
- Run the showers once a day to prevent any sort of buildup in the pipes
- Make sure to put water down all of your floor drains to keep your p-traps filled (so you don’t get sewer gas coming out)
- Empty your dehumidifiers (if you have any)
- Consider leaving some lobby lights on to deter vandalism
- Clean up any garbage outside the shop. It’ll help keep your city looking nice, and will also help deter vandalism.
- Answer voicemails
- Answer emails
- Answer social media inquires
- Collect physical mail
- Water any plants you may have (or take them to your house).
Weekly Ongoing Maintenance
- Replenish any water in your tanks that has been lost to evaporation (you may need to add a little salt as well).
- Do a disinfection pass on the inside of your tank walls and ceiling. It’s still a very hot and humid environment, and you want to make sure you’re preventing any mold growth.
There are, of course, other things to consider like communication with your customers and taking care of your members. You may be looking at laying off part, or all, of your staff temporarily so they can claim unemployment benefits. The next couple weeks are also going to be a good time to work on your marketing, to make sure that your customers are ready to float when you re-open.
We’re keeping the list above to just the operational side of things for now, but we’ll be releasing more over the coming days and weeks about what we’re doing at Float On to get through this.
Stay well,
Graham and Ashkahn
How to do A/B Testing – DSP 306
A/B Testing is a method to compare one system against another. Most often, this is used to compare the performance of one version of a website to another in real time.
Graham and Ashkahn talk about A/B testing (or “the old onesie-twosies” as Ashkahn says) and how it can be used to improve a float center’s website.
Monthly Budget for Float Centers – DSP 305
Graham and Ashkahn break down the real truth about how closely they watch their budget for Float On on a monthly basis.
The truth is… not much. As it turns out, monthly expenses for float centers don’t have huge variations unlike businesses that rely on retail, for example. Graham and Ashkahn explain they developed a sense for what’s within reason.
How to Sign on Float Ambassadors – DSP 304
Float Ambassadors have been with the industry since the beginning, but gained popularity sometime in the last few years. What are ambassadors and how to float centers find them? When they do find them, how do they get them to represent floating?
Graham and Ashkahn share their experiences with the practice of finding float mavens out in the world and the impact they’ve had on Float On.
How do you Talk about Psychedelics? – DSP 303
It’s no secret that the inventor of the float tank, John Lilly, was also an early psychonaut and used the tank for mental exploration in conjunction with LSD. Not everyone in the float community appreciates this shared history and some actively try to distance themselves from it given the taboo nature of psychedelics.
Graham and Ashkahn share their thoughts on psychedelics and floating and how, as a business, they can be completely separated while still being important, as well as explaining why some people might reasonably decide to disassociate from them.
What About 75 Minute Floats? – DSP 302
Most float centers divide on floats offered between 60 or 90 minute floats, but some split the difference right down the middle and offer 75 minutes. Graham and Ashkahn share their thoughts on this tactic, what they see as the pros, cons, and things to consider when implementing it.
Free Floats for Teachers – DSP 301
Graham and Ashkahn give their perspective on the pros and cons of giving free floats away for teachers. Giving out free floats is the Float On way and giving them to a specific group of people who could really use them sounds like a good idea.
The guys break it down and address some of the concerns any float center may have about running a program like this.
How to Help Float Research – DSP 300
With the push from Justin Feinstein at LIBR to get more float centers involved in research, many float center owners are chomping at the bit to push studies forward on the benefits of floating. But where do you start and how do you make it happen?
Graham and Ashkahn discuss this idea and how to do research right, as well as some of the things that might be helpful OR harmful to the world of floating in the eyes of the scientific community. There’s a lot of nuanced things to know about proper research and if you go in overzealous without considering how established science is done, it can harm the reputation of the practice.
Tips on Running Power to Float Rooms – DSP 299
Graham and Ashkahn offer some helpful tips to keep in mind when planning out the electrical framework for your float rooms. How many circuits you should plan for, where to place outlets, GFCI compliance, just to name a few.
Definitely an essential episode for anyone to listen to before going into their build-out phase.
Floating in National Media – DSP 298
Seeing float tanks in the national news and culture has increased in regularity within the last few years. Graham and Ashkahn discuss how these things get on such a large platform. The guys briefly go over some of the major stories that have been all over the media and how those stories happened. Mostly it comes down to luck, but there are a few things that can increases the chances of your float center getting on national TV.
The Real Tips on Building Your Own Float Tank – DSP 297
Someone wrote in and asked, again, despite the repeated warnings of the previous episode covering this topic, how to build a float tank properly.
Graham and Ashkahn try their best to restrain themselves and offer some practical advice about how to build your own tanks while also repeatedly warning about things to look out for when going forward with the process.
