These are challenging times for all of us, and many float centers (ourselves included) have decided to temporarily shut down to help stop the spread of coronavirus. Our team got together yesterday to figure out what we need to do to put our shop into hibernation mode, and we thought we’d share the list we came up with to help out anyone else who is in a similar position.
Best of luck to everyone going through this. We know we’ve seen a wellspring of kind words and support from our community when we decided to shut down, and we’re sure you have too. It’s nice to know the float world will be supported when we’re all on the other end of this.
Of course, if there’s anything that you’ve done in your own closure that you don’t see here, please send it along and we’ll update this list as suggestions come in.
Float Tank Solutions
Shop Hibernation Checklist
After the last float
- Do a full cleaning and disinfection pass across your center.
- Deal with your mail and package deliveries. You may need to put up a sign for your mail person, stop your mail from being delivered, or attempt to cancel or reroute any packages that are already on their way.
- Stop any automatic deliveries you have for any shop supplies.
- Make sure your HVAC system is set to run the whole time.
- Remove any food and beverages that can’t be stored for longer periods of time.
- Remove cash and any other valuables.
- Forward incoming calls and set up an appropriate voicemail (make a task to change the forwarding and voicemail when you re-open)
- Put bleach into washer and dishwasher and run them, then leave doors slightly open
- Consider putting out ant traps, if it’s appropriate for your area
Daily Ongoing Maintenance
- If your float tank doesn’t automatically run your pumps, go in twice a day to run them. This will both provide your float solution with its cleaning cycle, and prevent any salt crystallization from happening inside of your pipes and filtration equipment. Make sure to open the doors on your float tanks to let them air out while you’re there.
- Balance any levels of chemical treatment that you use (like hydrogen peroxide)
- Run the showers once a day to prevent any sort of buildup in the pipes
- Make sure to put water down all of your floor drains to keep your p-traps filled (so you don’t get sewer gas coming out)
- Empty your dehumidifiers (if you have any)
- Consider leaving some lobby lights on to deter vandalism
- Clean up any garbage outside the shop. It’ll help keep your city looking nice, and will also help deter vandalism.
- Answer voicemails
- Answer emails
- Answer social media inquires
- Collect physical mail
- Water any plants you may have (or take them to your house).
Weekly Ongoing Maintenance
- Replenish any water in your tanks that has been lost to evaporation (you may need to add a little salt as well).
- Do a disinfection pass on the inside of your tank walls and ceiling. It’s still a very hot and humid environment, and you want to make sure you’re preventing any mold growth.
There are, of course, other things to consider like communication with your customers and taking care of your members. You may be looking at laying off part, or all, of your staff temporarily so they can claim unemployment benefits. The next couple weeks are also going to be a good time to work on your marketing, to make sure that your customers are ready to float when you re-open.
We’re keeping the list above to just the operational side of things for now, but we’ll be releasing more over the coming days and weeks about what we’re doing at Float On to get through this.
Stay well,
Graham and Ashkahn
Should People with Ear Tubes Float? – DSP 286
The format for this episode is a little different this time.
Graham and Ashkahn received an anecdote about someone who floated with ear tubes in. The float ends with extreme discomfort and pain when the floater gets epsom salt water in their ears.
The guys highlight this issue as a warning to the industry that this is something that can happen with floating.
How do you Start Opening a Float Center? – DSP 285
For people just starting out, it can seem really daunting to start a float center. They may not even know where to begin.
Graham and Ashkahn tackle this idea head on. The most important thing is to do a lot of research (definitely check the resources) and to make sure you have people that you can call and refer to for support when you need it.
What to do When Floaters Interrupt Intros? – DSP 284
Ashkahn’s back and on form. He and Graham take on the question of how to handle first time floaters interrupt the pre-float intros explaining the process.
There’s a lot of information that first time floaters need, and if they aren’t paying attention, it can cause messy floats or unnecessary difficulty or confusion. The reunited duo provides some great tips while going over different customer scenarios.
Announcing: The 2018 State of the Industry Report
In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We’ve released one every year since, and this year we (once again) have the most contributions that we’ve ever had. In total, 293 existing...
When is the Best Time to Open a Float Center? – DSP 283
Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.
Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.
Tips for Choosing Contractors – DSP 282
Graham the Lone Podcaster takes the reigns on answering how to pick a contractor for float center build out.
It’s the kind of big decision that every float center owner hopes to only make once, so getting as much information ahead of time is extremely useful. Graham breaks down some useful tips and explains how to ask for a bid, specific skill sets to look for, and general advice on knowing when to walk away.
The Daily Solutions Podcast – Our Top 5 Episodes from August
If there is a single theme to the episodes this month it’s guest hosts. With all the preparing we did for the Float Conference, Ashkahn didn’t have much time to take his spot on the mic, but we got plenty of great people to fill in. This means that the topics covered...
Starting your Pumps Early – DSP 281
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
How Hot is Too Hot in a Float Tank? – DSP 280
Graham goes solo again to discuss how people perceive temperature in the float tank.
This is an important issue specifically because of a few pieces of technical information that your average customer just isn’t going to know, largely how humidity impacts temperature, but also how easy it is to overheat in an incredibly humid environment.
Why Shouldn’t Float Rooms Have Cement Backer Board? – DSP 279
Graham goes solo today while awaiting Ashkahn’s return.
Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.
