Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn succinctly breakdown the cost of float room construction. The average float room cost per the industry survey is $75,000 per room. How much of that is float tank cost and how much is construction? There are some variables to consider based on geography and types of tanks, but the guys lay out the average and clarify some of the numbers we’ve released previously.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “the state of the industry survey shows people spend about $75,000 per float room. How much of that is the tank cost versus construction cost?”
Ashkahn: Basically float tanks can range from probably around $10,000 at the cheapest for a commercial float tank.
Graham: Plus pump set up and all of that, yeah.
Ashkahn: Up to, I mean, they can get up to-
Graham: $90,000?
Ashkahn: Yeah, $90,000 dollars for a float tank.
Graham: So if you’re buying a $90,000 dollar float tank, then you’re now in negative money for room construction, negative $15,000. So, it depends a lot on what people are doing individually, and of course the survey itself is very subjective for what people are putting in there almost, so how people are defining everything that’s going into their room construction. It’s probably not 100% accurate even between individuals filling out the survey.
Ashkahn: But, I would say, if I had to make an average guess of how much people are spending on float tanks, it’s probably somewhere around $30,000 dollars a float tank. 30 – 35.
Graham: Which would be about $45,000 for doing the room construction, and I would say actually between maybe like $35,000 to $45,000 is not a crazy amount to assume for room construction. So not quite half and half, or half and half of the split that’s different for different people or something like that, depending on how much soundproofing largely you’re doing.
Ashkahn: Yeah, and we see that in general in terms of people’s cost total, float tank plus for rooms. It really does seem to range pretty much somewhere between $50,000 and $100,000 dollars for the whole shebang for a room. That was always kind of our calculations, and then seeing the industry report averaged that at about $75,000 kind of seems to support that.
So my guess is people on the higher end people are buying probably slightly more expensive float tanks and doing slightly more expensive construction, and at the lower end people are probably buying cheaper float tanks and doing cheaper construction.
Graham: Yeah, yeah, definitely. Again, there’s an, “Oh, yeah.” They’re like both how people are answering that question, and what you decide to do for your own center, and types of tanks, and whether you’re in the middle of a city or out in the countryside. All of these are going to affect how much is going into your individual build.
So, don’t assume that if you’re coming in a little under, if your ratio of tank to construction is different then the industry average that you’re somehow doing something wrong. It largely does have to do with how many tanks you’re installing at once, and how much crazy soundproofing you need to block out from city noises, and airplanes, and things like that.
Ashkahn: Yeah, you might just have less expensive construction if you’re way outside the city and you don’t have a ton of noise to deal with.
Graham: Yeah, just throw your float tank down a grassy hill somewhere-
Ashkahn: Yeah, call it good. Sprinkle some salt in the lake.
Graham: Sprinkle? I think it’d be a little more than that. This giant industrial dump operation puts Epsom salt or something into a lake.
So, if you have any more questions, go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
When DON’T you Feel Like Floating? – DSP 275
Graham has Juliet on the podcast today since Ashkahn is doing some post-Conference traveling.
The duo talks about times when floating just doesn’t feel like a good idea, which is something they have a bit of disagreement about. Juliet shares her experiences being cautious of her experiences in the tank and how she tends to have to be more mindful of when she floats.
How do you Handle Changing Memberships? – DSP 274
This year at the Float Conference, Derek hosted a marketing forum and took questions that he wanted to share with everyone here.
This episode focuses on how Float On handles memberships, including tiered memberships and how to gracefully transition from one type of membership to another.
Are Vapor Barriers a Good Idea for Float Centers? – DSP 273
You can tell when Graham starts to miss Ashkahn when he makes a soundboard made up of sound clips from previous episodes just to have Ashkahn do another intro.
Jake and Graham break down barriers in this episode. Vapor barriers, that is. These tools are a little confusing in the construction world and their efficacy is hotly debated in just regular construction, never mind the demands that a float center has, especially in regards to moisture protection. Fortunately, Graham and Jake know a thing or two about a thing or two and explain what vapor barriers are, how they work, and what the source of contention is.
What to Consider with Plumbing in a New Float Center – DSP 272
Graham and Jake talk about the confusing world of plumbing for your float center. There are any number of unpleasant surprises that can come about when planning the water lines to showers, getting floor drains in place, and making sure everything lines up how it’s supposed to. If the sewer main is too deep or not where you think it is, it can add a significant amount of cost to your build out just to get floor drains installed. Fortunately, the guys have some useful tricks to help mitigate costs and plan accordingly.
Should I use Spray-in Insulation for my Float Center? – DSP 271
Graham and Jake are still in a sans Ashkahn world at Daily Solutions, but they’re not letting it harsh their mellow.
The guys are talking about the different types of spray-in insulation today. It’s a pretty common material in construction and it can be a fantastic insulator for float centers, if you get the right type.
Jake and Graham go over the differences between open cell and closed cell insulation and why, specifically, float centers should avoid open cell insulation. They also provide some excellent pointers on the materials themselves and good conversations to have with a contractor regarding insulation.
Latest Blog Posts
Oh, the Questions You’ll Hear!
When you run a float tank center, you’re going to get asked a lot of questions. Do I float naked? Can I drown? Is this sanitary? Many of these are easy to answer: It’s recommended. Not without a conscious, and determined effort. Yes! There are some questions, however,...
Happy TANKSgiving (Giving Gifts to Monthly Members)
Monthly memberships are an important way to ensure that your float tank center has a consistent, if not dependable, amount of business.
While pricing structures for memberships vary widely across the industry, we’re focusing less on the strategy of what to charge and looking more at the benefits we’re actually offering. Once we’ve established a solid offering, then we can revisit pricing.
Running a successful monthly membership program takes more than just charging customers and making sure they use their credits. With a little creativity, we can find ways to increase engagement.
Your Flow Meter May Be Inaccurate (and what to do about it)
Float tanks tend to use a lot of parts borrowed from the pool and spa industry and, whenever that happens, it’s always important to question whether that pool part works accurately with our salt water solution. We’ve recently gained some insight into that question on...
The Float Tour Blog Roundup!
The following is our collection of links to the all of the Float Tour blogs. My chronicling of our adventure, highlighting all of you out there.
Thank you for the memories.
