Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn succinctly breakdown the cost of float room construction. The average float room cost per the industry survey is $75,000 per room. How much of that is float tank cost and how much is construction? There are some variables to consider based on geography and types of tanks, but the guys lay out the average and clarify some of the numbers we’ve released previously.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “the state of the industry survey shows people spend about $75,000 per float room. How much of that is the tank cost versus construction cost?”
Ashkahn: Basically float tanks can range from probably around $10,000 at the cheapest for a commercial float tank.
Graham: Plus pump set up and all of that, yeah.
Ashkahn: Up to, I mean, they can get up to-
Graham: $90,000?
Ashkahn: Yeah, $90,000 dollars for a float tank.
Graham: So if you’re buying a $90,000 dollar float tank, then you’re now in negative money for room construction, negative $15,000. So, it depends a lot on what people are doing individually, and of course the survey itself is very subjective for what people are putting in there almost, so how people are defining everything that’s going into their room construction. It’s probably not 100% accurate even between individuals filling out the survey.
Ashkahn: But, I would say, if I had to make an average guess of how much people are spending on float tanks, it’s probably somewhere around $30,000 dollars a float tank. 30 – 35.
Graham: Which would be about $45,000 for doing the room construction, and I would say actually between maybe like $35,000 to $45,000 is not a crazy amount to assume for room construction. So not quite half and half, or half and half of the split that’s different for different people or something like that, depending on how much soundproofing largely you’re doing.
Ashkahn: Yeah, and we see that in general in terms of people’s cost total, float tank plus for rooms. It really does seem to range pretty much somewhere between $50,000 and $100,000 dollars for the whole shebang for a room. That was always kind of our calculations, and then seeing the industry report averaged that at about $75,000 kind of seems to support that.
So my guess is people on the higher end people are buying probably slightly more expensive float tanks and doing slightly more expensive construction, and at the lower end people are probably buying cheaper float tanks and doing cheaper construction.
Graham: Yeah, yeah, definitely. Again, there’s an, “Oh, yeah.” They’re like both how people are answering that question, and what you decide to do for your own center, and types of tanks, and whether you’re in the middle of a city or out in the countryside. All of these are going to affect how much is going into your individual build.
So, don’t assume that if you’re coming in a little under, if your ratio of tank to construction is different then the industry average that you’re somehow doing something wrong. It largely does have to do with how many tanks you’re installing at once, and how much crazy soundproofing you need to block out from city noises, and airplanes, and things like that.
Ashkahn: Yeah, you might just have less expensive construction if you’re way outside the city and you don’t have a ton of noise to deal with.
Graham: Yeah, just throw your float tank down a grassy hill somewhere-
Ashkahn: Yeah, call it good. Sprinkle some salt in the lake.
Graham: Sprinkle? I think it’d be a little more than that. This giant industrial dump operation puts Epsom salt or something into a lake.
So, if you have any more questions, go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
Should I Wire my Float Tanks into the Wall? – DSP 265
Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.
On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them.
Can I Keep My Old Ceiling With My Buildout? – DSP 264
Hopefully everyone had a lovely time at the Friday Activities and the after-party.
Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!
Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling.
What to Expect When Expanding from 1 to 3 Tanks? – DSP 263
Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily.
Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags?
Fortunately, these guys know the score and are happy to share.
All About Floor Drains – DSP 262
As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast.
Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider.
How to Deal with Float Room Humidity – DSP 261
Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference.
Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand.
Latest Blog Posts
The Float Tour Blog – Issue #24
Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.
Don’t Mess With Alberta!
At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.
The Float Tour Blog – Issue #23
After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.
The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.
It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.
The Float Tour Blog – Issue #22
We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.
After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.
After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.
The Float Tour Blog – Issue #21
Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.
