Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

In this episode, Graham and Ashkahn succinctly breakdown the cost of float room construction. The average float room cost per the industry survey is $75,000 per room. How much of that is float tank cost and how much is construction? There are some variables to consider based on geography and types of tanks, but the guys lay out the average and clarify some of the numbers we’ve released previously.

Show Resources

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is, “the state of the industry survey shows people spend about $75,000 per float room. How much of that is the tank cost versus construction cost?”

Ashkahn: Basically float tanks can range from probably around $10,000 at the cheapest for a commercial float tank.

Graham: Plus pump set up and all of that, yeah.

Ashkahn: Up to, I mean, they can get up to-

Graham: $90,000?

Ashkahn: Yeah, $90,000 dollars for a float tank.

Graham: So if you’re buying a $90,000 dollar float tank, then you’re now in negative money for room construction, negative $15,000. So, it depends a lot on what people are doing individually, and of course the survey itself is very subjective for what people are putting in there almost, so how people are defining everything that’s going into their room construction. It’s probably not 100% accurate even between individuals filling out the survey.

Ashkahn: But, I would say, if I had to make an average guess of how much people are spending on float tanks, it’s probably somewhere around $30,000 dollars a float tank. 30 – 35.

Graham: Which would be about $45,000 for doing the room construction, and I would say actually between maybe like $35,000 to $45,000 is not a crazy amount to assume for room construction. So not quite half and half, or half and half of the split that’s different for different people or something like that, depending on how much soundproofing largely you’re doing.

Ashkahn: Yeah, and we see that in general in terms of people’s cost total, float tank plus for rooms. It really does seem to range pretty much somewhere between $50,000 and $100,000 dollars for the whole shebang for a room. That was always kind of our calculations, and then seeing the industry report averaged that at about $75,000 kind of seems to support that.

So my guess is people on the higher end people are buying probably slightly more expensive float tanks and doing slightly more expensive construction, and at the lower end people are probably buying cheaper float tanks and doing cheaper construction.

Graham: Yeah, yeah, definitely. Again, there’s an, “Oh, yeah.” They’re like both how people are answering that question, and what you decide to do for your own center, and types of tanks, and whether you’re in the middle of a city or out in the countryside. All of these are going to affect how much is going into your individual build.

So, don’t assume that if you’re coming in a little under, if your ratio of tank to construction is different then the industry average that you’re somehow doing something wrong. It largely does have to do with how many tanks you’re installing at once, and how much crazy soundproofing you need to block out from city noises, and airplanes, and things like that.

Ashkahn: Yeah, you might just have less expensive construction if you’re way outside the city and you don’t have a ton of noise to deal with.

Graham: Yeah, just throw your float tank down a grassy hill somewhere-

Ashkahn: Yeah, call it good. Sprinkle some salt in the lake.

Graham: Sprinkle? I think it’d be a little more than that. This giant industrial dump operation puts Epsom salt or something into a lake.

So, if you have any more questions, go to floattanksolutions.com/podcast and we will answer them.

Recent Podcast Episodes

How Best to Heat Your Float Tank – DSP 180

In this episode, Graham and Ashkahn break down the pros and cons (not Kahns) of different types of heating typically used in float tanks. Aside from going over the most common types of heating, they also provide tips and tricks for keeping your tanks warm that don’t have to do with water temperature and making sure you’re providing a comfortable experience for your customers. 

Tips on Managing Staff – DSP 179

Float On, for all its quirks, has ended up being very traditionally structured as a business. There are managers, co-managers, and employees who all have different responsibilities and commitments. Graham and Ashkahn break down how they came to structure the company this way, despite aggressively fighting against that mentality of a corporate, top down structure. 

What’s the Difference Between Loans and Investments? – DSP 178

The financial cost to opening a float center is huge at the startup, given the high ticket cost of float tanks themselves, as well as the expensive technical construction that comes along with making your rooms sound/water/saltproof. It’s rare for a float center to open entirely self financed, so what are the best options for getting funding? Loans versus investments.

Graham and Ashkahn break down the differences in these two approaches weigh the pros and cons to both for float centers. 

What About Vertical Float Tanks? – DSP 177

So for those of us who’ve wanted to float in a vertical tank ever since seeing Luke Skywaker use one in Empire Strikes Back, Graham and Ashkahn dish out what they know about vertical float tanks. 

Fortunately, another one of Float On’s owners, Christopher Messer, actually makes vertical float tanks, so the guys have the inside scoop on all things vertical.

What Would Utilities be for a Float Tank Center in Maine? – DSP 176

If you wanna stump the Float On boys, you have to try harder than asking about the cost of utilities for a float center in Maine. They tackled this episode prepared and take the rare opportunity to show specific numbers for utility usage at Float On and what that breakdown would look like in Maine, with help from special guest Jake Marty.

Latest Blog Posts

It’s All the Same Day

It’s All the Same Day

The Float Conference has come and gone, but if this last year is any indication, it will come around again in what seems like no time at all. Sometimes, even the last four years seem like they've only been a few months. Other times, I can't remember a life that's not...

How to Monitor a Niche Industry… Like Floating!

How to Monitor a Niche Industry… Like Floating!

A few years ago, if someone published information online about floating, chances are that it would spread quickly. There wasn't much available and what was available only had a small tight-knit circle to disseminate through. As the industry is growing, there are float...

Know Your Market – A Guide to Gathering Data

Know Your Market – A Guide to Gathering Data

Have you ever tried to look up market statistics or information for float centers? If so, you’ve probably been left a little disappointed. Mining for float industry data means coming to the unfortunate realization that the internet doesn’t actually have everything on...

The Float Conference Podcast – Talks About Nothing

The Float Conference Podcast – Talks About Nothing

In the float industry, we believe there is no such thing as too much information. The more salt-filled information "floating" around, the more we are able to educate our customers about the different benefits of spending time in the tank. On August 9th and 10th we...