Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn succinctly breakdown the cost of float room construction. The average float room cost per the industry survey is $75,000 per room. How much of that is float tank cost and how much is construction? There are some variables to consider based on geography and types of tanks, but the guys lay out the average and clarify some of the numbers we’ve released previously.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “the state of the industry survey shows people spend about $75,000 per float room. How much of that is the tank cost versus construction cost?”
Ashkahn: Basically float tanks can range from probably around $10,000 at the cheapest for a commercial float tank.
Graham: Plus pump set up and all of that, yeah.
Ashkahn: Up to, I mean, they can get up to-
Graham: $90,000?
Ashkahn: Yeah, $90,000 dollars for a float tank.
Graham: So if you’re buying a $90,000 dollar float tank, then you’re now in negative money for room construction, negative $15,000. So, it depends a lot on what people are doing individually, and of course the survey itself is very subjective for what people are putting in there almost, so how people are defining everything that’s going into their room construction. It’s probably not 100% accurate even between individuals filling out the survey.
Ashkahn: But, I would say, if I had to make an average guess of how much people are spending on float tanks, it’s probably somewhere around $30,000 dollars a float tank. 30 – 35.
Graham: Which would be about $45,000 for doing the room construction, and I would say actually between maybe like $35,000 to $45,000 is not a crazy amount to assume for room construction. So not quite half and half, or half and half of the split that’s different for different people or something like that, depending on how much soundproofing largely you’re doing.
Ashkahn: Yeah, and we see that in general in terms of people’s cost total, float tank plus for rooms. It really does seem to range pretty much somewhere between $50,000 and $100,000 dollars for the whole shebang for a room. That was always kind of our calculations, and then seeing the industry report averaged that at about $75,000 kind of seems to support that.
So my guess is people on the higher end people are buying probably slightly more expensive float tanks and doing slightly more expensive construction, and at the lower end people are probably buying cheaper float tanks and doing cheaper construction.
Graham: Yeah, yeah, definitely. Again, there’s an, “Oh, yeah.” They’re like both how people are answering that question, and what you decide to do for your own center, and types of tanks, and whether you’re in the middle of a city or out in the countryside. All of these are going to affect how much is going into your individual build.
So, don’t assume that if you’re coming in a little under, if your ratio of tank to construction is different then the industry average that you’re somehow doing something wrong. It largely does have to do with how many tanks you’re installing at once, and how much crazy soundproofing you need to block out from city noises, and airplanes, and things like that.
Ashkahn: Yeah, you might just have less expensive construction if you’re way outside the city and you don’t have a ton of noise to deal with.
Graham: Yeah, just throw your float tank down a grassy hill somewhere-
Ashkahn: Yeah, call it good. Sprinkle some salt in the lake.
Graham: Sprinkle? I think it’d be a little more than that. This giant industrial dump operation puts Epsom salt or something into a lake.
So, if you have any more questions, go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
What are UL Field Evaluations? – DSP 124
A UL Field evaluation is something that can be requested from your Health Department or regulator, often prior to opening. It’s designed to ensure a certain standard for electrical equipment in commercial businesses. Graham and Ashkahn break down the process of getting a UL Field evaluation, how much it’s likely to cost, and even some tips when discussing this with your health department.
What is HDPE? – DSP 123
So HDPE stands for High Density Polyethylene. It’s a type of plastic and it’s incredibly handy for float centers. Float On switched to using this any place they previously would’ve used wood in their building materials.
Graham and Ashkahn break down exactly what this miracle product is, where you can buy it, all the different uses it has in a float center, and some special tips and tricks of getting it just the way you need it.
Causes of Float Related Neck Tension – DSP 122
The good news is that it doesn’t seem to happen after the first float, the bad news is we’re not really sure why it happens, but we have some theories. This even happened to Ashkahn the first time he floated, so this is an issue very personal to his heart.
Thoughts on Attending Trade Shows – DSP 121
When you’re just starting out, you’ll try anything to get the word out. Trade shows are a fairly common way to generate interest in a new technology or practice, so why not floating?
Graham and Ashkahn have a few trade shows under their belt and they’ve had modest almost success at them. They lay out their experiences and challenges that float tanks face at a venue like this and what you should be prepared for if you decide to attend one.
When it’s Time to Fire Your Customers – DSP 120
This is one of those situations that’s never fun to be in, but it’s something that’s gotta be dealt with. A customer is rude, unpleasant, or makes the staff or other customers uncomfortable. It can start small and turn into a repeated and difficult problem. As the business owner, oftentimes, the buck stops with you and you have to figure out how to handle that situation.
Graham and Ashkahn share their experiences at Float On with their problematic customers and how they handled it while offering tidbits of advice.
Latest Blog Posts
Start-a-Center Giveaway 2013
While we wait for the next month of blog posts to roll in, I wanted to announce a thank you promotion we're putting out. We've had over 500 items downloaded from our site since we started just a couple months ago, which means the industry is growing. The feedback...
An Autobiography of Floataway
I was always interested in making things and taking things apart. So after A levels in Physics, Chemistry and Maths, I chose Mechanical Engineering at Bristol University, UK, My first floating experience was in an inflatable toy boat before I could swim, and it was...
An Introduction from Sweden
Anu Enok Looking back, I realize that I’ve been a ”seeker” most of my life. I have always ”wanted to know what to find around the next corner”, which means I have tried a lot of things. I have been mixing jobs and studies. I have studied different stuff like market...
A Little Past
In the late 1960's, I was a systems computer programmer. At one point, I was in a department with just two other people. If I went down to the cafeteria with one of them, I would talk. But if I went down with both of them, I was too shy, and I would be silent. In...
