Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn succinctly breakdown the cost of float room construction. The average float room cost per the industry survey is $75,000 per room. How much of that is float tank cost and how much is construction? There are some variables to consider based on geography and types of tanks, but the guys lay out the average and clarify some of the numbers we’ve released previously.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “the state of the industry survey shows people spend about $75,000 per float room. How much of that is the tank cost versus construction cost?”
Ashkahn: Basically float tanks can range from probably around $10,000 at the cheapest for a commercial float tank.
Graham: Plus pump set up and all of that, yeah.
Ashkahn: Up to, I mean, they can get up to-
Graham: $90,000?
Ashkahn: Yeah, $90,000 dollars for a float tank.
Graham: So if you’re buying a $90,000 dollar float tank, then you’re now in negative money for room construction, negative $15,000. So, it depends a lot on what people are doing individually, and of course the survey itself is very subjective for what people are putting in there almost, so how people are defining everything that’s going into their room construction. It’s probably not 100% accurate even between individuals filling out the survey.
Ashkahn: But, I would say, if I had to make an average guess of how much people are spending on float tanks, it’s probably somewhere around $30,000 dollars a float tank. 30 – 35.
Graham: Which would be about $45,000 for doing the room construction, and I would say actually between maybe like $35,000 to $45,000 is not a crazy amount to assume for room construction. So not quite half and half, or half and half of the split that’s different for different people or something like that, depending on how much soundproofing largely you’re doing.
Ashkahn: Yeah, and we see that in general in terms of people’s cost total, float tank plus for rooms. It really does seem to range pretty much somewhere between $50,000 and $100,000 dollars for the whole shebang for a room. That was always kind of our calculations, and then seeing the industry report averaged that at about $75,000 kind of seems to support that.
So my guess is people on the higher end people are buying probably slightly more expensive float tanks and doing slightly more expensive construction, and at the lower end people are probably buying cheaper float tanks and doing cheaper construction.
Graham: Yeah, yeah, definitely. Again, there’s an, “Oh, yeah.” They’re like both how people are answering that question, and what you decide to do for your own center, and types of tanks, and whether you’re in the middle of a city or out in the countryside. All of these are going to affect how much is going into your individual build.
So, don’t assume that if you’re coming in a little under, if your ratio of tank to construction is different then the industry average that you’re somehow doing something wrong. It largely does have to do with how many tanks you’re installing at once, and how much crazy soundproofing you need to block out from city noises, and airplanes, and things like that.
Ashkahn: Yeah, you might just have less expensive construction if you’re way outside the city and you don’t have a ton of noise to deal with.
Graham: Yeah, just throw your float tank down a grassy hill somewhere-
Ashkahn: Yeah, call it good. Sprinkle some salt in the lake.
Graham: Sprinkle? I think it’d be a little more than that. This giant industrial dump operation puts Epsom salt or something into a lake.
So, if you have any more questions, go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
Having a Laundry Service vs. DIY Laundry – DSP 69
Laundry is a fundamental necessity for float centers, the significance of which you can easily overlook. Some centers do laundry on-site, while others hire out a laundry service. On-site is almost definitely cheaper, but is it worth it? How much does it factor in to your bottom line to hire a laundry service, and what about the drawbacks of doing it on site? Not every float center can afford an industrial washer and dryer, can residential units handle a float center’s salt encrusted towels?
Graham and Ashkahn hit all these points and more while talking about their own personal experience doing both on-site laundry and hiring out a service and which one they definitively think is better and why/
Pros/Cons of Having a Post Float Lounge – DSP 68
Post float lounges are cool. Lots of float center owners use them to imbue their centers with their own personality, whether it be large sprawling rooms with comically large furniture, oxygen bars with artificial waterfalls, or just a place for you to hide mushroom sculptures for your customers to find. But these come at the cost of square footage for your center, which undoubtedly can cause problems. So, is it worth it? Ashkahn and Graham tackle the pros and cons, getting into the finer details of what it really means to have or not have these rooms in your center.
The typical Length of a Float Transition – DSP 67
A fundamental part of a float centers daily schedule is the transition between floats. It’s when the rooms get cleaned, the water runs through its filtration system, floaters need to shower, linens need changing out… So how long do you need to get all of this done? Naturally, the shorter it is, the more floats you can run in a day, but how close to the wire can you cut it?
Graham and Ashkahn lay out very clearly exactly why they do what they do at Float On for transitions and help illustrate some of the benefits and major hurdles they have had to overcome to get to this sweet spot in their scheduling.
How much to pay yourself as an owner – DSP 66
This is not an easy question for any business to answer, and it depends a lot on your own personal situation. Graham and Ashkahn lay down their thoughts on this difficult topic and provide insight into how they handle it at Float On.
When it’s time to fire an employee – DSP 65
Terminating an employee isn’t an easy thing to do. How do you know when to have that conversation? Obviously you don’t want to come off too strongly, but there also has to be a line somewhere. Graham and Ashkahn attempt to explain where the line is at for them and their personal philosophy on the subject.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
