Something in the world of floating have you stumped?
Show Highlights
Crowdfunding has made so many projects possible that would otherwise not exist. It seems perfect for niche ideas, concepts that would otherwise never see the light of day, and passion projects that just need to happen. This sounds perfect for float centers, but there are some caveats.
Crowdfunding is time intensive and there’s not guarantee of success. Aside from that, there are some issues with it that complicate things for float centers that other crowdfunded projects likely won’t face. Graham and Ashkahn talk about the successes of float center crowdfunding and the not-so-successes as well.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: And the question is, “How do you feel about funding your float center through crowd funding sites, like Kickstarter?”
Ashkahn: Here’s the problem. How many people can actually come? Like you’re restricted with your float center, geographically. So that’s one thing, right?
Graham: Mm-hmm.
Ashkahn: Most of the time, when you look on Kickstarter, they don’t have that. They’re not restricted geographically, and it’s often products, and they’re usually trying to make enough money to hit like a first batch of manufacturing.
Graham: Yeah.
Ashkahn: But with these crowdfunding platforms one of the reasons I think they’ve been so successful was that you all of a sudden can reach a global audience, and have people contribute, and so you’re kind of hindered right from the get go by that. So, it’s kind of a difficult thing, is the amount of money you need to start a float center versus how much you could feasibly raise, geographically, with a Kickstarter, or some sort of crowd funding, or just … I don’t think you’re ever going to be able to make enough money from Kickstarter-
Graham: It’s difficult.
Ashkahn: -to actually fund your entire construction.
Graham: It’s difficult.
Ashkahn: It is. So, I think it could help. I think you can fund some of your construction like that.
Graham: And that’s what I was going to say, too, is that I’ve seen a lot of attempted Kickstarters, and Indiegogo’s, and crowdfunding campaigns for float centers-
Ashkahn: Yeah.
Graham: … and the most sane of those have relatively low goal amounts.
Ashkahn: Right.
Graham: And it’s only to cover a portion of their ultimate construction, or initial start-up costs.
Ashkahn: So, we’re talking, like, what I usually see things in the low tens of thousands.
Graham: I think the most that I know of anyone raising is in the tens of thousands.
Ashkahn: Uh-huh.
Graham: Like maybe around 40 to 70-
Ashkahn: Something-
Graham: … Might be like the highest.
Ashkahn: That’s the highest.
Graham: Yeah.
Ashkahn: And to build a float center-
Graham: And I only know a couple people who’ve done in that range, too. Way more common, I’ve seen Kickstarter campaigns that have raised three thousand to like-
Ashkahn: Five, ten thousand.
Graham: Yeah, exactly, maybe ten, fifteen thousand on the high end of that lower rung.
Ashkahn: They make their goals, usually, which is nice, but to open a float center, we’re talking hundreds of thousands of dollars.
Graham: Yeah.
Ashkahn: So, really, you’re not even coming close to having like this be the majority, or the real foundation of your funding and, you’re selling floats that you then won’t be making money on when you actually open.
Graham: But every bit helps.
Ashkahn: Yeah.
Graham: I almost view it as kind of similar to Groupon, in a certain way.
Ashkahn: It’s good marketing, too.
Graham: Yeah, you’re on a different platform, you’re going to be reaching customers you might not reach through another advertising venue. You’re able to presale some floats, and get people interested, and feel like they’re helping you start up. And as long as that’s your goal, then I say totally go for it. There’s not really a problem with leaving money on the table somewhere, like with grabbing it from another source.
Ashkahn: It does make people excited, too.
Graham: Yeah.
Ashkahn: Like, “There’s this float center coming, and I signed up for this thing, and I’m going to have a float when they open.” And it’s kind of their part of your story, at that point, which I think is cool for customers.
Graham: So, the downside of trying to raise money that way is that it takes a lot of effort and time to run a crowdfunding campaign.
Ashkahn: Oh, yeah.
Graham: Regardless of the site that you’re doing it through. If you talk to people who are actually trying to fund their products solely through crowdfunding, this becomes their full-time job, from a few weeks before they launch until a couple weeks after, is just managing this campaign.
Everyone I know who’s actually raised a serious amount of money, enough to fund something that’s, you know, again, in that $50,000+ kind of range, of a product they’re launching, or even getting up to hundreds of thousands of dollars, they’re working float tank construction hours on this.
Ashkahn: Yeah, yeah.
Graham: They’re working at least 12 hours a day, just like killing it, for the entire month that they’re running their campaign, in order to drive the traffic necessary, and get interest. It’s something you don’t realize if you’ve never done this before, is those sites, I mean, you could luck out and be on one of those things they love-
Ashkahn: Uh-huh.
Graham: … lists that they email out, but the chances of that are so low. So, you’re doing most of your marketing out to your audience, and you’re the one who’s garnishing all the attention and getting everyone excited, and contributing. It’s not like you launch on Kickstarter and all of a sudden they’re just sending this huge horde of people over your way. It’s like, “No, that’s still on you.” And that’s what ends up taking such a long time, is just getting people to go to the page in the first place.
Ashkahn: The other difficult thing is that you, from the time you get the money, to the time your float center is probably actually ready to float people, is also probably a decent amount of time. Construction is just always rife with delays.
Graham: Mm-hmm.
Ashkahn: So, just be super realistic, if you’re doing this, because it might be six months. If you have a location set, and everything, by the time your crowdfunding’s done, if you need this money for construction, by the time you’re actually ready to float these people, like at minimum it’s probably three or four months, and more likely could be longer than that. So, make sure people’s expectations are set correctly.
Graham: Yup, and I would say, okay, so here’s kind of like the conclusion of all of that, for some of my just concrete advice to people, which is launch this expecting to not make that much money. So, have a relatively low goal. Go into it knowing that you’re going to have to hustle in order to get the people there, contributing. So, budget aside enough time, that you’re not going to be in the midst of construction when this thing is going on, because then you’ll put some medium amount of energy into launching it, and it’ll do okay, and it’ll totally not be worth it, unless you actually invest that extra bit to push it over the edge.
Probably, with your content, double-down on stuff you’re already planning on putting on your website. So, doing sketch-ups of your space, a little interview with you as the founder, about what you want, or what your float center is all about, and don’t just design this for Indiegogo, or Kickstarter, your crowdfunding platform, but have content where it’s going to see the light of day in other areas. Social media, your website, little walk-throughs, things like that, because it’s going to take a lot of effort, and sometimes money, to even get a really good video up there, to help raise money, and they’re all about the videos, too.
Ashkahn: Uh-huh.
Graham: If you look into how to do a crowdfunding site, you definitely want a video there. So, replicate some of the content, don’t just make it one-off use, and what else?
Ashkahn: Well, so you might want to … I don’t know too much about this, but there are other platforms that are more geared towards geographic specific things, like I know Portland has its own Portland crowdfunding platform, that people look at, for specifically, like things in town. So, it might be worth looking into something that’s a little more suited for what you’re doing, than Kickstarter and Indiegogo.
The other thing that’s maybe worth considering is if things are kind of set up for you, and you know you can do this even … You’re know you’re just using this as a small part of your funding, and you’ve got your location and all that stuff, you could also just pre-sell floats yourself, to your float center, and not give a cut to any of these platforms, and just have your hustle lead there. Just lead to your website and just start pre-selling floats straight through whatever your software is to sell that. Then you don’t have to really give a cut to anybody.
The nice thing about Kickstarter is you don’t get any of the money, unless it’s fully funded, which gives people confidence to put in money, but for you, again, you’re not trying to hit some sort of like amount of money to do your first batch of fundraising.
Graham: Your goal would have to be, yeah, three hundred thousand dollars, or something, which its not going to be. So, that’ll-
Ashkahn: That logic’s not really there, in your setup, so you don’t really need that benefit of it. You might just be able to run your own pre-sale and cut out the middleman.
Graham: All right, so-
Ashkahn: Yeah. Good luck. Sorry if that wasn’t exactly what you wanted to hear.
Graham: Yeah, and yeah, again, definitely there’s no reason not to give it a whirl, and try to pull in some extra money from it, but its not going to fund your whole center.
Ashkahn: Uh-huh.
Graham: And if you do, you’ll actually be the first person I know of who did it that way.
Ashkahn: Let us know. You would be awesome.
Graham: And you’re awesome anyway.
Ashkahn: Yeah, you’re already awesome. Don’t listen to what anybody tells you.
Graham: You know, unconditionally awesome, don’t let Ashkahn sell you short. Yeah.
Ashkahn: All right. If you guys have other questions for us, hop over to floattanksolutions.com/podcast, and we will talk to all of you later.
Recent Podcast Episodes
Are Tankless Water Heaters the Best? – DSP 270
Graham and Jake take on talking about Tankless or “On Demand” water heaters today. They break down a lot of the benefits of them compared to storage water heaters like the fact that they provide a nearly limitless source of hot water, require less energy consumption, etc. They’re not perfect though, and any float center considering one should look closely on how best to implement them. Jake shares some of the pitfalls of them as well as how to maximize their usefulness.
Should Float Centers use Light or Heavy Gauge Studs? – DSP 269
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Construction to Make Your Life Easier – DSP 268
Graham and Jake cover a wide range of construction tips to make running a float center easier. Everything from making sure you have extra storage to installing mop closets with sinks in them for dealing with heavy duty chemicals.
The advice is pretty much a shotgun approach of tips, tricks, and hard lessons learned throughout the years.
Draining Float Tanks into Septic Systems – DSP 267
Graham and Jake tackle the difficulties of draining float tanks and how that process can differ based on different municipalities, different water treatment systems, or whether you’re using a septic system or not.
Water treatment typically involves whole contained ecosystems and highly concentrated epsom salt water can impact that pretty drastically. The guys provide good tips for each type of system and what to be prepared for if you’re operating in a rural area with a septic system.
The Difference Between STC and Decibels – DSP 266
Post-Conference Ashkahn is still out of the recording studio, but fortunately Jake is keeping Graham company in there.
Graham and Jake break down the differences between decibels and STC ratings, two very important to understand when figuring out soundproofing. There’s a lot to digest in this episode, but fortunately the guys keep it easy to understand by providing a broad level overview of the different concepts.
Latest Blog Posts
The Float Tour Blog – Issue #28
Home sweet home! After so many months on the road, it was strange being back here in Portland. We were exhausted, excited, and a little travel weary. The first night back, I slept in my own bed for the first time in three months and the world just melted away.
Having travelled across the United States, I’m reminded of how insular Portland is. We are aggressively fixated on keeping things local. Local beer, ketchup, bikes, pet food, pillows, phone cases… it’s part of our charm. We want to reward people for living here and being a part of the community. It’s so pervasive that, after living here for so long, I kind of forgot that Secret Aardvark hot-sauce isn’t available everywhere, and that most cities don’t even recycle, let alone compost.
The Float Tour Blog – Issue #27
Our northern neighbor – a sister city, of sorts – Seattle is the largest metropolitan area in the Pacific Northwest. It’s the land of Microsoft and Kurt Cobain, and the culture here embraces both simultaneously. It’s tech business professional in the front and rock n’ roll grunge in the back. This blend creates a perfect storm of high energy business life and high energy nightlife, making relaxation a valuable commodity. Floating helps fill the void left by nightmarish traffic and overcrowded restaurants.
Given that it’s so close to home, the float centers in Seattle are a lot more familiar to us. Our visits here were more like a high school reunion than they were like the first day of school. During some of our visits, we were picking up conversations right where we left them.
The Float Tour Blog Issue #26
Vancouver is the largest metropolitan area in Canada, and third largest on the West Coast. It’s a major hub for international trade, with one of the largest ports in the world, giving it a large migrant population, mainly from Asia, the Middle East, and Australia. It’s also been a long-time home to the Canadian film industry, and has even been nicknamed “North Hollywood.” Dozens of film and television productions from major studios film here every year.
Vancouver is very much an international city. It has large boroughs dedicated to varying cultures, including one of the largest Chinatowns in the world. The society here is more receptive to new ideas, always looking for the next big thing; it’s not surprising that floating has blown up in Vancouver as much as it has.
In the last 3 years, 10 float centers have opened up, most of them being larger 4–6 tank centers. The really interesting thing is how they all opened within the same short amount of time about 1 ½ to 2 years ago, within months of each other.
The Float Tour Blog – Issue #25
We finally made it back to the West Coast! We went through the Canadian Rockies and were overwhelmed by the beauty of it all. We drove through hours and hours of winding mountain roads, fertile valleys, and tiny towns so picturesque they looked like movie sets. It was so captivating, in fact, I suspect Graham and Ashkahn may have secretly replaced themselves with robotic doppelgängers to hike throughout Banff.
This post will focus on the smaller communities in B.C. that are bringing floating to new people every day. We also get to visit Canadian manufacturer Pro Float. They’re relatively new to the scene, just opening up earlier this year – another exciting sign of the growth in the industry.
