Something in the world of floating have you stumped?
Show Highlights
Float Tanks are expensive. Purchasing tanks can easily end up being half of your opening costs when starting out, so it makes sense to want to purchase tanks that have a long lifespan.
Thinking about which float tank manufacturers might last the longest, though, is probably not the way to think about this issue. For one, it’s impossible to tell what manufacturer is going to be around the longest. What’s more, if anything does break, the vast majority of the time you don’t need to go to the manufacturer to get it fixed in the first place.
Ashkahn and Graham share their thoughts on proper float tank care and the steps any float center owner should take when considering a tank.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: All right. Hey. Hey. Hey.
Graham: You need to break set a couple more times?
Ashkahn: Hey.
Graham: Hey, [inaudible 00:00:46].
Ashkahn: Still a little new to this. Sorry guys.
Ashkahn. This is Ashkahn.
Graham: Yep. I’m Graham right over here.
Ashkahn: Hey.
Graham: And today’s question is.
Ashkahn: Hold on, hold on. Special announcement first.
Graham: Oh yeah. Yeah, I forgot about that.
Ashkahn: There’s this thing called the Float Conference. Just a conference.
Graham: What?
Ashkahn: It’s about floating. We put it on and it’s happening pretty soon. It’s in August, August 18th and 19th.
Graham: Pretty excited.
Ashkahn: And you should get your tickets, because we have a cut-off date where the prices of the tickets get a lot more expensive; it’s the day that we got to start making concrete, some of our ordering numbers and stuff like that. So we set a date. It’s coming up. It’s July 19th.
If you’re coming to the Float Conference and you don’t have your tickets yet, get them before then, otherwise, the prices will go up.
Graham: And it’s the 16th for hotels as well, that people should get?
Ashkahn: Yeah. Yeah. If you’re looking for a hotel, you don’t have a hotel booked yet, we have some group discounts. There’s a place, the Hilton is just a block away from the conference and there’s a page on the conference website, FloatConference.com/hotels, where you can book and get a cheaper rate. Definitely do that. The deal ends on July 16th. It’s the last time you can book those.
Graham: All right.
And now, today’s question is, “despite you making fun of all my questions, I still think you are the hippest guys. Today’s question is,” you threw that in and I threw that in too. You really made me sound redundant there. Thanks a lot question asker.
“What tank manufacturers do you think will be around the longest for future parts availability?”
Ashkahn: Well that’s a stupid question. I mean-
Graham: Obviously the RESTroom.
Ashkahn: What a dumb question that you could ask me.
Graham: If you haven’t heard, go to restroomfloat.com right now. I know we don’t usually recommend float tanks, but I will just go out on a limb here and say, single best float tank on the market.
Ashkahn: There’s no real competitor, really. There’s nothing even like it, I think, is a fair statement.
Graham: Yeah. Yeah?
Ashkahn: What float tank manufacturer is going to be around the longest?
Graham: Specifically for access to parts. So if they buy a tank, and I guess that tank falls apart.
Ashkahn: Well, the more likely it is that your tank is falling apart on you, the less likely it is that that manufacturer will be around, you know?
Graham: That’s true. So maybe it just is a nice balancing effect where-
Ashkahn: Yeah. Yeah. If you never need parts-
Graham: no matter where along the spectrum it is, it’s the correct place to be, you know? Interesting. I like that twist.
Ashkahn: Yeah. I mean, it’s a good question. If I could predict the future, I wouldn’t be doing this podcast.
Graham: Yeah, we’d just be investing in the float tank manufacturer stocks.
Ashkahn: Yeah. So I don’t know. I mean, I don’t know what manufacturer’s going to be around the longest.
Graham: Yeah. No, we have no idea.
Ashkahn: It’s hard to say. I mean, when we opened our center, whenever it was, a thousand years ago.
Graham: A century ago or something, yeah.
Ashkahn: Eight, seven and a half years ago. When we opened all those many, many decades ago, most of the manufactures that you see in a lot of float centers right now, didn’t even exist.
Graham: Yeah.
Ashkahn: Weren’t even there yet. And so what manufacturers are to come even-
Graham: We don’t know.
Ashkahn: Who’s to say? I don’t know.
Graham: Certainly not us. That RESTroom floats thing though. That was pretty good.
Yeah, in fact, I don’t even know what kind of question you’re asking here.
Ashkahn: Well, okay. Let’s approach this from a different direction, other than foreseeing the future.
Graham: Another better question?
Ashkahn: This is a fine question. Thank you. This is a very upstanding question you sent in to us today.
Graham: Playing good cop isn’t going to get you anywhere with this, Ashkahn.
Ashkahn: They need to send us more questions.
Let’s take this back a bit, because what parts would you even need a manufacturer for, I think is another interesting question to ask? The more that you’re getting a tank that uses a pump from a pump company that’s been around for a while, or a UV system from a UV company, or PVC pipe is PVC pipe.
Graham: Tires from a tire company.
Ashkahn: So most the stuff in your filtration system, I think, is going to either be easy for you to fix or replace with or without the float tank manufacturer. No float tank manufacturers out there are really making their own, totally custom UV lights or pumps or filters or forging their own PVC pipe or however PVC’s made.
Graham: Growing it out of the ground or something like that.
Ashkahn: So all that stuff is parts that they’re getting from other places, so no matter who you’re going with, you’re most likely going to be able to source those parts from somewhere else.
It’ll probably be easier for you, if you’re buying a float tank, in the country that you live in. Float tanks from other countries typically use parts from other countries, and they’re a little bit harder to find and source. Not impossible. We’ve done it. We have some float tanks from England and we’ve certainly found the parts and ordered them from England, but it’s not quite as easy as just going to Home Depot and there’s the same type of threading and stuff like that, that’s on the rest of your system.
Graham: Yeah, yeah, yeah.
Ashkahn: I would say, really the hardest part is probably the control box and the software, right?
Graham: Yeah, because if something happens to the finish of the fiberglass tub, you can get it refinished; you don’t actually need the manufacturer for that.
Ashkahn: Yeah. Heaters. They’re probably buying heaters from some company; they’re not making their own heaters.
Graham: Yeah. And you can find another heater company, theoretically, if you really had to.
Ashkahn: Yeah.
Graham: We know. If we got a used tank that didn’t have heaters in it-
Ashkahn: Right.
Graham: we could find heaters to replace that.
Ashkahn: We could fix that. Or last resort, put an in-line or circulation heater in.
Graham: Yeah, yeah, yeah.
Ashkahn: That hurts the ability for long floats, but it’s functional.
Graham: So yeah, the control system-
Ashkahn: That’s the tricky part, right?
Graham: I mean, you’d almost have to probably figure out a way to just take the inputs and outputs and if the control system broke, you’d go back to, “Here’s where the speakers go. Here’s where the pump turns on,”-
Ashkahn: Yeah.
Graham: and it’s hard-wire it into the controls.
Ashkahn: Yeah. And most manufactures have their own custom control box and their own custom control system for it, especially as time goes on, more and more manufacturers are going that direction; they’re making software, they’re getting electrical engineers to put together these boxes.
Graham: Yeah. And it’s getting more and more fancy, I guess is the right word for it.
Ashkahn: Right. Yeah. No, that is the right word for it.
Graham: Which means, the ability to just do that yourself and recreate these fancy setups that people have is-
Ashkahn: How fancy are you, really?
Graham: Are you a fancy person? If you’re a fancy person, no problem.
Ashkahn: Yeah, you got this.
Graham: But otherwise-
Ashkahn: But if you’re a common slob like the rest of us-
Graham: This ain’t no slobcast.
Ashkahn: And anything’s possible. At a certain point, you could just ditch the entire control box, the entire control system.
Graham: You’d probably have to, to be honest. You’d probably just have to ditch it.
Ashkahn: Yeah. It depends how far out you are from buying this thing, or what’s wrong with it? There’s certainly certain situations I think you could probably hire someone to just make a tweak or something, but at a certain point, probably the easiest thing is going to, especially thinking about the future, so that you don’t have to hire another person a week later to fix some other random little thing and keep Frankensteining this control box.
Yeah, at some point you’ll probably just have to ditch it, hire some low voltage electrical engineer person or high voltage if the pump and stuff is going through there.
Graham: Yeah.
Ashkahn: And build a little control box. And we’ve done this. When we built our own float tanks, we had to deal with this; we had to build a little control box.
Graham: Yeah.
Ashkahn: And it can be as simple as just little timer knobs that you have in your lobby that feed into something that turns the entire system on and a way to play music. So there are simple solutions without all the-
Graham: Rigamarole?
Ashkahn: Rigamarole or automation.
Graham: Was that the word you were looking for?
Ashkahn: Yeah. If you’re not a rigamarole type of person, there’s totally ways to deal with it.
Graham: Yeah. And really, everything could get replaced.
Ashkahn: Yeah.
Graham: It’s just a question of difficulty. I was thinking about liners, too. If you’re doing a tank that has liners throughout it in the fiberglass tub.
Ashkahn: Sure. Yeah, because those are custom sized.
Graham: Yeah, but you can reverse engineer them, you can have someone come in, you can custom size liners and have your own made.
Ashkahn: Yeah. Yeah.
Graham: It’ll be more expensive.
Ashkahn: The real question is, at the point that you’ve replaced every piece of the float tank, is it even the same float tank?
Graham: That’s a good question.
Ashkahn: Yeah. I don’t think anyone’s thought of something like that before.
Graham: You know where you should send that, you should go to FloatTankSolutions.com/podcast and send that one in. I’d answer it.
Ashkahn: Okay. That was good.
I got one more little thing to say before we finish, which is that-
Graham: Oh yeah, that wasn’t even my sign off.
Ashkahn: I thought it was just a real smooth segue.
Graham: Oh, I’m not that smooth.
Yeah, no go on there. What were you going to say?
Ashkahn: There are people out there.
Graham: All right. Thanks everybody!
Ashkahn: We’ll see you tomorrow!
There’s many people out there using float tanks right now from manufactures that don’t exist anymore.
Graham: True. Like the RESTroom.
Ashkahn: Yeah. Sometimes from manufacturers that never existed. But you see a lot of Floatarium’s out there. Floatarium hasn’t been a company for decades.
Graham: Apollo Float Tanks.
Ashkahn: Apollo as well. They’re still technically making those.
Graham: I’m sorry. Sorry Apollo.
Ashkahn: Yeah. Easy, easy. That’s still being made in Australia.
Graham: Whoops. They stopped existing for a little bit, or the company got purchased by someone else?
Ashkahn: This gets into hazy float history that I’m not even a hundred percent certain on. But I think there used to be two dudes who worked together, made these tanks and then they split. And one of them-
Graham: Okay, well-
Ashkahn: Let me at least finish.
One of them went to somewhere in Asia and started making them and those became the PathFinders. And the other one went to Australia and continued making those as the Apollo, or maybe vice versa.
And then the guy up in Asia sold his molds and stuff to a dude in Russia who’s still making that branch of it up there currently. And then there’s a guy down in Australia still making that branch of it. I think both branches of it are still currently being manufactured.
Graham: So actually, this is, as far as questions about people going out of business, this one doubled its business. So in some cases, you might actually end up with two separate manufactures who both could have spare parts for you.
Ashkahn: So yeah, you’ve got nothing to worry about. You’re all good. Don’t worry about it.
Graham: And thank you very much for continuing to send in questions, despite me berating them all the time. That was a really fun one to answer, so even though we pretty much didn’t say anything of any real merit.
Ashkahn: Yeah.
So if you guys have some high-quality questions to send in to us in the future, go to FloatTankSolutions.com/podcast. You’ll find a little thing right there that you can type it in to.
Graham: Was that your sign off or was that mid episode?
Ashkahn: That was it. Signing off.
Graham: Cool.
Bye everyone.
Recent Podcast Episodes
Should I Wire my Float Tanks into the Wall? – DSP 265
Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.
On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them.
Can I Keep My Old Ceiling With My Buildout? – DSP 264
Hopefully everyone had a lovely time at the Friday Activities and the after-party.
Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!
Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling.
What to Expect When Expanding from 1 to 3 Tanks? – DSP 263
Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily.
Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags?
Fortunately, these guys know the score and are happy to share.
All About Floor Drains – DSP 262
As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast.
Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider.
How to Deal with Float Room Humidity – DSP 261
Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference.
Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand.
Latest Blog Posts
The Float Tour Blog – Issue #24
Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.
Don’t Mess With Alberta!
At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.
The Float Tour Blog – Issue #23
After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.
The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.
It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.
The Float Tour Blog – Issue #22
We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.
After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.
After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.
The Float Tour Blog – Issue #21
Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.
