Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
How to Build your Mailing List – DSP 325
Graham and Ashkahn consistently emphasize the importance of mailing lists, but today they dive in deep to talk about how to build a mailing list, giving their best tips and tricks to collecting emails and how to make sure you’re getting the right people signed up.
How to Deal with Employee Conflict – DSP 324
Graham and Ashkahn address the unenviable task of dealing with disagreements between staff members as a small business. This is an area that Float On has needed a lot of help with in the past. The best practices of Human Resources aren’t very intuitive in interpersonal relationships, so hiring a professional is almost always a good idea.
Float Tanks in the Military – DSP 323
The military is famously tight lipped about the research it does in general. No less so than when researching seemingly benign practices like float tanks.
Graham and Ashkahn give their scoop on what they know about the military’s use of float tanks in their research and training programs.
Best Cleaning Practices without Burning Out Employees – DSP 322
Every float center has to compromise somewhere on how much cleaning to do between transitions. Where do you draw the line and how do you make sure that you’re keeping your employees happy without sacrificing sanitation?
Graham and Ashkahn remind everyone that “perfect” sanitation doesn’t exist and that making solutions collaborative in a work environment can do wonders for morale and problem solving in situations like this one.
Good Website Copy for Float Centers – DSP 321
Most websites you visit are filled with words. And that may seem simple, but if you build a website, you’re going to have to be the one to come up with those words. How do you decide what to put up there and how much is too much? What should you focus on?
Graham and Ashkahn tackle the elusive web copy problem for float centers and provide some helpful tips for anyone who’s feeling a little overwhelmed at the concept.
Latest Blog Posts
Timeline for Opening Up a Float Center
Opening up a float center is a lot like climbing a mountain. Even if you can see the peak, it’s a lot further away than you think, and when you finally get there, the journey and the destination usually end up being different than previously assumed.
In this post we’ll lay out a general process and timeline of what you may encounter on your path, from initial idea to actually operating a center.
Can you have volunteers at your center?
So you’re thinking about using volunteers in your float center?
Before we clarify what a “volunteer” actually means, we’ll first explore why a float center might be considering them in the first place. While it can be a way to provide floats to people who are otherwise unable to pay, the impulse to bring in volunteers can also stem from a desire to get some sort of free labor (later in this post we’ll dive into why you can’t actually do this, but it’s important to recognize that the instinct is understandable, especially when you have someone lined up and willing to work for free).
In addition to a desired boost in overall productivity, it’s also a way to invite more people into your center to experience what you do. Some customers actually want to help out and see what happens behind the scenes at a center.
Floating and Athletics, a Strong Relationship
One of the beautiful things about the float tank is that it serves to rejuvenate the whole person. — the body, mind, heart.
Broadly speaking, it’s a tool for homeostasis, an ideal environment that supports balance, health, and growth. This piece will look specifically at floating and athletics. For anyone who defines themselves as an athlete, or as a general pursuant of athletic endeavors, the float tank can be a powerful asset.
In this post, I’ll discuss individual athletes who float and how to look at this from a marketing perspective. I’ll also discuss past and present research, and share some thoughts on how the relationship between the athletic and floating communities might continue to unfold.
A Skeptic’s Guide to Floating
I think it’s time we addressed the giant metaphorical elephant in the salty metaphorical room — there are lots of exaggerated and untrue claims about the benefits of floating being spread around the industry.
Some are anecdotal, some are only half true, and some are just patently false. Floating has historically had a strong oral tradition tied to it — the practice has survived through word-of-mouth, one passionate floater teaching another everything they know. The unfortunate thing about this is that the information disseminated can’t be reliably tested or shared with others on a broader scale. You can’t use “my buddy Chris” as a source for a health benefit of float tanks in a newspaper article, much less for a research paper.
Now that we’re becoming a bit more mainstream, we thought it would be nice to add some clarity to what we should and shouldn’t be telling people about these difficult-to-understand, saliferous containers.
