Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
Being the First Float Center – DSP 320
What’s it like to be the first float center to open in an area? How do you handle it?
Graham and Ashkahn explain what it was like opening Float On, being one of the first dedicated float centers in the United States. The exciting thing is that creating awareness is really fun, but it can be a little stressful since your float center will represent floating as a practice for people.
Many of the tips here are the same for anyone opening a center: focus on awareness, be prepared to educate, and make sure your floats are the best they can be.
Are Light or Dark Colored Float Rooms better? – DSP 319
Is it better to have a light colored room that hides salt, or a dark colored room that easily shows it?
Graham and Ashkahn dish out some strong opinions on this idea, especially the idea that dark colored rooms and tanks are good for maintaining employee accountability.
What you Need to Know About Algorithms – DSP 318
Ashkahn and Derek talk about algorithms, those pesky bits of code that push your posts up or down on social media and search engines and leave you scrambling for ways to get likes and clicks, constantly mixing it up to just be seen.
The duo discusses how algorithms affect everyday posts for small businesses and how to keep up on information about the constantly changing nature of these systems. The main takeaway is, if your content is fresh, non-repetitive and you aren’t trying to game the system, you likely have nothing to worry about.
Commissions for Memberships? – DSP 317
Any sales related business knows that commissions are the gold-standard incentive program for drumming up business, but how does it work in a float center for memberships?
Derek and Ashkahn talk about the mixed success they’ve experienced at Float On each time it’s been tried.
Getting Members to Float More Often – DSP 316
Single float memberships have become increasingly more common in the float industry, typically with the option to purchase additional floats for the month at a discount. But how do you properly incentivize those members to float more than a single time per month?
Ashkahn and Derek talk marketing tips to keeping your float center top of mind and making sure your members are active regularly.
Latest Blog Posts
How Many Float Tanks Should I Have?
Intro If you’ve crossed over into the sacred realm of “Yeah, I’m pretty sure I’m gonna open up a float center,” an obvious question arises — “How many tanks should I have?” Now, if you’re like me, you’re creating a 90 tank float community where everyone who buys in...
The Construction Secret to Soundproofing: Storage Between Float Rooms
If you’ve ever taken a look at our construction materials or gotten advice on soundproofing, you’ve probably heard of the importance of including “air gaps” when building out your center. What that means and why it helps can be a bit of a technical question, and the practical implementation can seem daunting and unreasonable.
Float Conference 2017 Recap
Now that the salt has settled, I’m sharing some thoughts from “The Great Gathering of People Who Really Love Being Alone Sometimes in a Dark, Briny Room,” also known as The Float Conference.
The conference has always been an amazing opportunity to connect with the pulse of the broader float industry and, if this year’s gathering showed us anything, it’s that our collective heartbeat is as strong as ever.
2017 Float Conference Program Introduction
Every year, I have the great pleasure of writing the introduction for the Float Conference program, and every year we share it on our blog so that members of the industry who weren’t able to make the journey out to Portland are able to check it out. I hope you enjoy reading it as much as I enjoyed writing it.
From all of us at Float Tank Solutions, where our time is measured as the space between two conferences, thank you again for a wonderful year!
– Graham Talley
