Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
What’s Floating Like Around the World? – DSP 290
Ashkahn and Graham break down the wild world of floating, well… worldwide. They share what they know about the industry in different countries, continent by continent, and gauging which ones are the most float centric vs. those that are the least (hint, it’s definitely Antarctica).
Replacing Filtration Parts for your Float Tank – DSP 289
When it comes to replacing a filtration system for a float tank, there’s sadly no easy answer. There isn’t a one-stop shop place to get replacement parts for float tanks (yet). Most systems are piecemealed together by manufacturers to work specifically for their systems.
In addition to all that, they also often use internal customized materials to accommodate the specific needs of float tank solution. So without some serious internal knowledge of how those systems work, it’s nearly impossible to safely and accurately just swap out one piece for another.
How to Handle Customers Wanking in Tanks? – DSP 288
Graham and Ashkahn tackle the uncomfortable issue of handling customers that may be using the float tank to do things in the tank wasn’t designed for.
They discuss the social aspects along with the sanitary aspects of dealing with ejaculate in the tanks.
Basics of Opening a Business – DSP 287
Graham and Ashkahn take creative license in this episode to talk about the basics of what everyone should know before starting a brick and mortar business.
They want to help others not make the same mistakes they did. This includes everything from getting a legal entity and hiring bookkeepers to making sure you have the correct labor law posters displayed and follow proper hiring practices.
Should People with Ear Tubes Float? – DSP 286
The format for this episode is a little different this time.
Graham and Ashkahn received an anecdote about someone who floated with ear tubes in. The float ends with extreme discomfort and pain when the floater gets epsom salt water in their ears.
The guys highlight this issue as a warning to the industry that this is something that can happen with floating.
Latest Blog Posts
Location Checklist – The Search for Your Float Center’s Home
In honor of our newly minted, fresh off the press, prize winning Construction Packet, we are releasing one of its more succinct components, the Location Checklist, as a free resource. Don’t let the fact that it’s only one page fool you – this set of questions breaks down the major site and location considerations for your center.
Financing Your Center With Bank Loans
If you are looking to open a center, at some point, you have to face the reality that you’re going to need to spend, and thus track down, a good chunk of money. There are many ways to fund a float center – personal capital, family and friends, sending travel funds to the exiled Liberian prince that you met on the internet and using the forthcoming reward money, etc. This post, however, will focus on financing using bank loans.
A Peek Into Our Construction Packet: Planning Your Space – Square Footage and Number of Float Rooms
For anyone opening a float center, one of the earliest questions they’ll have to tackle is, “How big should my space be?” This can be one of the most difficult queries to answer, because it hinges on many variables.
Will you be offering other services? What types of tanks are you getting? What other rooms will your space need? If you’re planning on installing a float tank water slide, that’ll take up extra space, too. I know it’s unreasonable, but Jake really wants someone to do it.
All of these questions aren’t even factoring in thinking about profit margins. It quickly becomes a daunting task that can feel overwhelming.
How to Launch a Successful Kickstarter Campaign
At Float Tank Solutions, our main goal is simple.
We want to provide access to floating for as many people as possible. That’s why, this week, we are opening up our blog to our friend, Shane Stott. Shane, an avid float ambassador, life coach, and founder of Zen Float Co., will walk us through the essentials of running a Kickstarter campaign, with a highlight on his current efforts to raise money through Kickstarter for a documentary on floating.
