Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
What About Instagram? – DSP 254
Facebook gets a lot of attention on this podcast when it comes to talking about marketing on social media, but what about Instagram? It seems to be getting more and more popular, are Instagram ads just as good as Facebook then? Why or why not?
Derek tackles this question with Graham in tow and explains the nuances of the different platforms and why you’d post on one and not the other, despite that they are both owned by the same company.
Should I Change the Name of the Float Center I Bought? – DSP 253
Is it a good idea to change the name of a float center after buying it from someone else? As the industry gets older, more and more people are going to have to answer this question.
Branding is definitely part of the equity of a business and you purchase everything that comes with it. But can you put a price on being happy with your business and making it feel like your own?
Derek and Graham tackle these questions while Ashkahn is away for the Conference.
What’s a Marketing Funnel? – DSP 252
Graham and Derek break down the ins and outs of what, exactly, a marketing funnel is and how to develop one when speaking to banks and investors.
If this is something you don’t understand, you’re not alone! Graham consistently explains how a marketing funnel works in the Apprenticeship every year to a bewildered class. Don’t be afraid to take notes and ask questions.
How to Make Great Videos for Social Media – DSP 251
Derek and Graham talk about video content, and how to use it effectively on social media. There’s a lot of wisdom in keeping videos short and to the point, but they also recommend keeping them low tech (unless you can go really high tech).
Derek also issues a challenge for every float center listening, by September, everyone should go out and film a testimonial video and post it on social media. If you do, let Derek know by sharing it with the Float Tank Solutions facebook page.
How long should an e-mail be? – DSP 250
In this sports analogy laden episode, Graham and Derek talk about effective copywriting tactics when writing out an email to the loyal customers of float centers across the globe.
They line out the importance of focusing on a short, sweet, and simple message, while outlining some strategies at Float On that are used with that in mind.
Latest Blog Posts
2016 Float Conference Program Introduction
It’s been my pleasure to write the introduction to the conference program for five years in a row, and each year I enjoy posting it up on this blog for everyone who didn’t make it out. I hope to see you all in 2017! – Graham
The Float Tour Blog – Issue #16
We finally took this trip international! Explaining Float Tour to the border guards was a little bit of a challenge (especially through the language barrier), but – after some creative hand gestures and finding synonyms for “sensory” and “deprivation” – we made it through.
The Float Tour Blog – Issue #15
New York is where it’s at, and it’s arguably the busiest place on the planet. People here live fast-paced lives and rarely – if ever – have time to slow the fuck down and enjoy themselves.
Just like Jersey, people here also see skepticism as a point of pride, and take it to an even greater extreme. All of this makes New York a sort of “proving grounds” for floating: if it can make it in New York, it can make it anywhere.
The Float Tour Blog – Issue #14
The Garden State houses probably the highest concentration of float tanks on the East Coast. Jersey is a gateway to the major metropolitan areas nearby: New York City, Philadelphia, and Washington D.C.
This convenience has made Jersey the suburban hub for every major industry on the East Coast for generations, giving it the highest population density of any state in the U.S. This is fantastic for the float industry; if there’s one statistic that correlates with successful float centers, it’s population density.
