Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
Getting Salty with Speakers: John Turner – DSP 249
Ashkahn takes the reigns on the show to talk to John Turner, a professor at the Medical University of Toledo and one of the original researchers into the benefits of float tanks.
They discuss some of the surprising benefits of floating, mindfulness, and just good ways to live a positive life. A very heartwarming and lovely chat.
Good Float Center T-Shirt Designs – DSP 248
What makes a good float center t-shirt? Is it about branding and being informative? Should it look cool or simple? Or does it have to do with comfort over design?
Graham and Ashkahn have some capital O Opinions about this so strap in and listen to them discuss all about the t-shirts they sell for Float On and the evolution of that process.
All the Float Conference Questions – DSP 247
The Float Conference is an exciting time and the way the rest of the industry talks about it sometimes borders on reverence. If you’ve never been before, then it can be simultaneously exciting and overwhelming trying to anticipate exactly what this event is going to be like.
Fortunately, Graham and Ashkahn are here to walk you through what to expect from the Conference and how to prepare for the wildest weekend of the year for the entire float industry.
What’s a Good Cancellation Policy for Float Centers? – DSP 246
There are few things more frustrating than having customers schedule early and then having them cancel, or worse, just fail to show. So how does Float On handle it?
Well, Graham and Ashkahn share their thoughts on this as well as commiserate with every float center our there that has a problem with cancellations. They share some tips, tricks, and advice on how to properly lie to customers for the best result.
Why Do Float Centers use Child Sized Earplugs? – DSP 245
When shopping around for earplugs for float tanks, there’s only a few that actually work well in the float solution. One of these is the Mack’s wax earplugs, basically the standard for swimmers as well. But why do so many float centers buy the child sized ones when stocking their float center?
Ashkahn “Big Ears” Jahromi let’s all of us know what he thinks is going on and that many people may be using these earplugs incorrectly. Graham “Normal Ears” Talley, backs him up with some facts and important reminders.
Latest Blog Posts
The Float Tour Blog – Issue #13
Passing through Virginia and Maryland, we thought that if all serving politicians, lobbyists, Supreme Court justices, and the President of the United States of America floated on a regular basis, it’d be easy to imagine that the world would be a better place.
The Float Tour Blog – Issue #12
In this issue of The Float Tour Blog, we visit centers across 3 states and catch up with a few long time friends and a familiar voice to a lot of float center owners.
The Float Tour Blog – Issue #11
This issue of The Float Tour Blog focuses on our exploration into floating in the Deep South. Graham, Ashkahn, and JT tours centers in Louisiana and Georgia while also visiting the largest cryotherapy manufacturer in the USA.
The Float Tour Blog – Issue #10
Floating has definitely found a home here in the big cities: Dallas, Austin, and Houston.
Texas has several centers that started as holdouts of floating from before 2010, but new centers are popping up on a regular basis.
