Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
What are “Good” Social Media Numbers for Float Centers? – DSP 189
Not everyone is a social media wizard, but fortunately for Social Media Week, Derek is here to answer all the questions the float industry might have, from the obvious to the obscure.
In this episode, Derek, Graham, and Ashkahn discuss what it means to have good social media engagement. The effect of things like Facebook likes, reacts to posts, and how to cultivate those.
Can you Float During a Lightning Storm? – DSP 188
Certain areas are prone to particular natural events. Some more terrifying for float centers than others. Lightning storms come to mind. Because water is conductive and the last thing you want in your float tanks are electrocuted customers.
So, is it a bad idea to float during lightning storms or does it even matter? Graham and Ashkahn weigh in with a heavy dose of skepticism and repeated calls to consult with a professional electrician before making any big decisions.
How to Choose the Perfect Float Tank – DSP 187
One of the biggest decisions you have to make for your float center is what tank to choose. This is what your business is based around. So how do you go about making this decision? A lot of newer float center owners want to know what the “Best Tank” is. The reality is that there isn’t some clear front runner in float tank quality. Every tank has it’s strengths and weaknesses. It really depends on what you’re looking for and what you want to spend.
Graham and Ashkahn share what they think are the most important things to consider when choosing your float tank.
How to get Building Plans Before you Have a Building? – DSP 186
Often times banks will want your building plans to approve your business loan, but you can’t purchase a building before the loan is approved. Sometimes health departments will want to know which tanks you’ll get before they’ll approve your business which can also hold up your bank loan. It feels like a Catch-22 and has definitely infuriated plenty of float center owners just starting out.
Graham and Ashkahn lay out the confusing battle you’ll have to take on to get your business started and the ways in which you can get approved, plus the silver linings these extra hoops can offer you.
How to Deal with Humidity in Float Rooms – DSP 185
Humidity can be a subtle, difficult, and persistent challenge for a lot of float centers. Aside from just the massive amount of humidity that a float tank can create, showers also generate a lot of humidity. This can be a challenge for your construction, your soundproofing, and your floater’s comfort.
Fortunately, everyone has to deal with this issue, so there’s a lot of tips out there. Unfortunately, there isn’t an exact science on the best humidity for float rooms as of yet. Graham and Ashkahn unmuddle this quandary a bit before muddling it back up again.
Latest Blog Posts
Empty Float Tanks and What to Do with Them
There’s a marketing mantra here at Float On that we thought might be useful to share. Especially for people at the more early stages of their float center. The mantra is simple, but it's an integral part of our marketing philosophy, and can go a long way in helping a...
60 vs 90 Minute Float Sessions
I've had the pleasure of giving tours of our HelmBot software. While some of these tours are to established centers looking to switch scheduling softwares, most of the tours have been to centers in the final stages of opening. In talking about how to set up "The Helm"...
A Resource for Buying / Selling Used Float Tanks
Save Money When Starting a Float Center Construction aside, one of the more significant costs to starting a float center are the tanks themselves. There are numerous float tank manufacturers to choose from with costs that range quite a bit. A lot of the newer float...
How To Give a Proper Walkthrough
Why Float Centers Need “Walkthroughs” First time floaters typically need some instruction before they can get in the tank. A lot of things can go wrong if a client is not well informed before they attempt to float. In many cases, the first float is the most important...
