Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
Should we Pay for SEO (Search Engine Optimization) Services? – DSP 169
When opening any small business, you want to do what’s best to gain an edge in marketing and make sure that you’re doing your best for your flowering company. The new trends and changes can be daunting if you’re unfamiliar with technology or the marketing world.
Float centers are no exception. So when you get a call from someone claiming to be able to boost your SEO standing, it can seem like a really good deal. How do you tell if these companies are legit? And do float centers really need SEO help? Graham and Ashkahn break this down and simplify it for the uninitiated.
Should we do Tank Maintenance Ourselves? – DSP 168
As it turns out, there’s no certification program to running a float center. You buy these big expensive machines that require constant, technical maintenance and you’re on your own for how to accomplish that. There aren’t float tank repair persons that you can call (yet) and just have them show up and do it for you, so making sure you’re knowledgeable and prepared for this maintenance is a really good idea.
Graham and Ashkahn lay out the Float On best practices for how to plan for maintenance so that it’s the least disruptive for your center if something goes wrong.
What to Consider With a Home Float Center – DSP 167
Getting a tank in your house and floating some people is a great first step on the path to opening a float center. It helps you figure out exactly what the maintenance is going to be like, along with just the experience of floating other people and introducing them to this neat salty practice.
There are things to consider and there’s a right way and a wrong way to run a home based float center. First thing to consider is your local laws for small businesses and making sure you comply with those. Additionally, you need to decide if you’re just floating friends and family or if you’re going to have paying customers. This is also going to impact what type of float tank you should use and the demands you should consider on your house. Graham and Ashkahn have seen plenty of these and share the best practices as they’ve seen them laid out.
How to Deal With Burnout – DSP 166
Running a float center is hard work. Especially if you just opened up and dealt with months of agonizing, crazy construction, and then go straight into pulling long hours keeping your center open. Even with the reward of seeing floater’s post float glow can fall short of satisfying in some moments.
It’s important in these moments to take time for yourself so as not to get devoured by your work. Ashkahn and Graham share some of the things that helped them stay sane working long, thankless shifts at Float On in the early days and get through the hard days so that they could thrive.
Will Hard Water Affect a Float Tank? – DSP 165
Hard water is something that comes from having too many minerals in your water source. It can cause a lot of problems with plumbing if it’s too hard, and most buildings will have resources for dealing with this to help avoid calcium buildup in pipes and along tubs or pools. As for how it interacts with a float tank, specifically, it seems like the larger issue is going to be how it impacts the rest of your building.
Graham and Ashkahn break down what they know about how hard water affects float tanks and the differences you’re going to have to look out for if you’re using well water over municipal water sources.
Latest Blog Posts
Listening to Music in a Float Tank
To play or not to play music in the tank…
Some centers start the float with a few minutes of music and then fade away, some don’t play music until the end, and another float center will not let you turn off the light. In fact, they also have the noise of a automatic massage table, pounding away next to you, while other places will leave it up to the floater to decide. READ MORE…
Specific Gravity Specifics
Specific gravity is the ratio of the density of a substance to the density (mass of the same unit volume) of a reference substance. The reference substance is nearly always water for liquids or air for gases.” Specific gravity, then, in the case of our float tanks, is how dense the salt water is compared to regular, run of the mill water.
So, where should we keep the specific gravity of a float tank? READ MORE…
Don’t Squander Water in Your Showers
Once you start planning out the monthly costs for your float center, you’ll quickly come to appreciate a running joke in the industry: although you may think you’re providing floats, what you’re really doing is running a shower business.
Each person that floats at your center will take two showers: one before their float, and one after. These showers are definitely necessary. Before a customer enters a float tank, you’ll want them to shower in order to make sure that water contamination from skin oils and dirt is minimized, and after a float a customer is going to need a shower to remove the salty residue from their skin. READ MORE…
How Do You Properly Use Hydrogen Peroxide?
The Art of Floating, a great blog by the Float Shoppe here in Portland, has been answering questions that hit their inbox. Which is brilliant, and gives a second life to the extensive novellas on that minutiae of float tanks that I find myself writing daily. Here’s the first in what will hopefully be a series. READ MORE…
