Something in the world of floating have you stumped?
Show Highlights
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome everybody. This is Graham over here.
Jake: And this is Jake over here.
Graham: The man with the lesson.
Jake: Oh, something with the lesson.
Graham: And today’s-
Jake: We have a question.
Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”
Jake: My thoughts on heavy versus light gauge studs.
Graham: So they’re talking about metal studs.
Jake: Of course.
Graham: Because you don’t have gauges of wood.
Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.
Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.
Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.
Graham: And so either of those would be light gauge.
Jake: Right.
Graham: 20/25, that’s light.
Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.
Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.
Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?
Graham: Well, in some places they’re required for commercial construction.
Jake: Yeah. In some places you just have no choice. So we love them.
Graham: They don’t flex with the seasons as much in general.
Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.
Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.
Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.
Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?
Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.
Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-
Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.
Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.
Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.
Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.
Jake: Yeah.
Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.
Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.
Graham: Okay. But back to the original question. So light versus heavy gauge studs.
Jake: Light gauge studs, unless it’s load bearing.
Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?
Jake: No, no, no, great. I love them.
Graham: Good question.
Jake: Yeah, great question.
Graham: Bravo. Bravo. Encore.
And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.
Jake: Goodbye.
Recent Podcast Episodes
Can People Undergoing Chemotherapy Float? – DSP 159
Naturally, most float centers want to be available for anyone who needs it, but there are practical limitations that they may not know about with certain conditions. Is there any risk or issue to having someone with cancer float in a float center? Do they need special instruction or care? Are float centers opening themselves up to liability by providing them floats?
Ashkahn and Graham answer a few of these questions, but the most important thing to remember is to consult the patient’s doctor. Leave the medical advice to the professionals.
Quick ways to get cash now for your business – DSP 158
Being strapped for cash isn’t a fun situation to be in. With an operating business, you have options, fortunately.
Graham and Ashkahn brainstorm some ideas for quick cash and some they’ve even used at Float On when a surprise expense has come up. It’s worth noting that to get money in the short term, you’re likely sacrificing something in the long term.
Avoiding Soundproofing Mistakes During Float Tank Installation – DSP 157
Obviously float center construction is expensive, in no small part due to the soundproofing in each of your rooms. The last thing you want to do is screw it up by making a simple mistake when installing your float tanks.
Graham and Ashkahn delve into everything you need to consider during installation to not screw up your soundproofing, including what additional materials to purchase and how to ideally set up your float rooms.
Book recommendations for Float center owners – DSP 156
It’s no secret Graham and Ashkahn love to read, often about business methodology and philosophy. In this episode, they provide a list of the books they would consider to be their biggest influences that helped shape their own business philosophies and methods, along with what exactly about each of these titles is so interesting and engaging.
Does it matter how you order your filtration equipment on a float tank? – DSP 155
When setting up your float tank, it can be tempting to look at the spa pack and imagine how much more convenient it would be if the pieces were rearranged a little bit. So… is there a particular order to the filtration equipment? Why or why not?
Fortunately, Graham and Ashkahn have painfully researched this issue and know all the ins and outs of water treatment systems for float tanks and why they are the way they are.
Latest Blog Posts
The Best Time to Start a Float Center
It's not today. Today is a great time to start a float center, but that's not the best time. The best time was a year ago. Or a month ago. Or yesterday. I've had the pleasure of seeing people from their first, innocent float all the way through opening the doors on...
Getting to Know Your Epsom Salt
Epsom salt has uses ranging from personal care to large-scale agriculture, and, of course, it is the salt that brings the ‘float’ to float tanks. Since it plays such a key role in our industry, and in maintaining the chemical balance of our beloved float tanks, we...
5 of the First Things To Do if You Want to Start a Float Center
One of the most interesting things I’ve discovered by fielding calls and emails from people through Float Tank Solutions is that floatation therapy has an uncanny ability to grab people. I’ve spoken to many dedicated floaters, still amazed by the therapy after decades...
Meet the Float Tank Solutions Team
We've met a good deal of you in person at the Float Conference, or at Float On in Portland. Some of us (mostly the easily identifiable ones with the larger facial hair) can even be seen in many an online video discussing salt buildup and small business. For some of...
