Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Still no Ashkahn today. He’s taking a couple of post-conference days to himself.

Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Alright, welcome everybody. This is Graham over here.

Jake: And this is Jake over here.

Graham: The man with the lesson.

Jake: Oh, something with the lesson.

Graham: And today’s-

Jake: We have a question.

Graham: Question. Yeah, I guess, first of all there’s no Ashkahn so if you’re expecting Ashkahn, you were wrong and you should feel bad about it. And so it’s just Jake and I rocking it out. Answering some construction stuff. And today’s question is “what are your thoughts on heavy versus light gauge studs?”

Jake: My thoughts on heavy versus light gauge studs.

Graham: So they’re talking about metal studs.

Jake: Of course.

Graham: Because you don’t have gauges of wood.

Jake: No, they’re talking about metal studs here and you have a whole range of gauges. What do we see? A lot of 20? 20 gauge is what we’ve come across as the most common.

Graham: Yeah, I think especially when you’re dealing with commercial construction, not residential, when we’re gonna be putting some heavy sheets of drywall on our walls most commonly. So I think a lot places 25 is the requirement, but 20 is really common.

Jake: Yeah, definitely. Probably more common for what we want with our very heavy walls like you’re saying. But to get back to the question, light gauge versus heavy gauge.

Graham: And so either of those would be light gauge.

Jake: Right.

Graham: 20/25, that’s light.

Jake: Absolutely. I guess the answer there is light gauge. Unless it’s load bearing. If you’re not holding up part of the property, if you’re not putting tanks on the second floor, if it’s not load bearing, then light gauge studs are definitely the answer.

Graham: And that’s pretty much the alternative to wood studs. You don’t really see heavy gauge steel studs used as just an alternative to standard wood studs in framing or anything like that. Light gauge is the alternative.

Jake: And we like metal studs for a couple reasons. If you do end up with a moisture problem in your wall or something like that, metal stud holds up better than a wooden stud. A wooden stud is gonna swell, it’s gonna flex. Mold and mildew can grow through it. Whereas a metal stud is not gonna suffer that sort of damage. What else do we like about them?

Graham: Well, in some places they’re required for commercial construction.

Jake: Yeah. In some places you just have no choice. So we love them.

Graham: They don’t flex with the seasons as much in general.

Jake: If you have a good thermal barrier. If you have a good thermal break in between an exterior environment and an interior environment. When we were down in Australia they were mentioning that they’d experience some problems with that from time to time if they didn’t have a good thermal break because it would be really, really hot outside.

Graham: Oh, sure, yeah, yeah, yeah. It’s Australia too.

Jake: Yeah, right. Usually in spring and fall is when the houses were changing and stuff like that. That’s what we heard.

Graham: So does that mean that the metal actually expands and contracts more than the wood is going to change with the seasons?

Jake: It has worse thermal resistance. Yeah, that is kinda one of the down sides of metal studs. The thermal resistance is not as high as it is for wood.

Graham: But does it actually grow and shrink more with the thermal changes? I mean it definitely is affected more but-

Jake: I think it is, right? Because that’s where you’re getting those popping. That’s where you’re getting that sound. And they do flex. Especially if you go lighter gauge studs. If you’re looking at 25 gauge, those flex much more than 20 gauge which is flexing more than 18.

Graham: This is why we have Jake on the show for construction stuff. Yeah, I thought the metal flexed less than wood. That’s interesting.

Jake: I mean I don’t know the difference between the two. What I know is that metal is flexing. Metal is doing something. I don’t know which is flexing more.

Graham: Yeah. Yeah, yeah, totally. No, it makes sense. Especially in Australia.

Jake: Yeah.

Graham: Okay. So just ignore that whole flexing. But that’s no longer a point of benefit for the metal.

Jake: They don’t rot like wooden ones do. They can be considered greener because they’re using recycled content as opposed to wood.

Graham: Okay. But back to the original question. So light versus heavy gauge studs.

Jake: Light gauge studs, unless it’s load bearing.

Graham: Ding. A little extra bonus content with wood versus steel in there too. But yeah, anything else?

Jake: No, no, no, great. I love them.

Graham: Good question.

Jake: Yeah, great question.

Graham: Bravo. Bravo. Encore.

And if you have questions of your own, just head on over to floattanksolutions.com/podcast. We’ll be there waiting. We’re always waiting. Talk to you tomorrow.

Jake: Goodbye.

Recent Podcast Episodes

Problems with Free Floats – DSP 354

The question asker today calls out Graham and Ashkahn on their most common marketing tip: giving away free floats!

The guys are put on trial and forced to defend the practice from someone who has experienced some major fallout from giving out floats to people. They offer some solid advice on how to make sure your free floats reach maximum effect and reassurance in the fact that it’s a relatively low risk practice.

If Money were No Object – DSP 353

Graham and Ashkahn have some fun and talk about all the crazy things they’d add to Float On if money were no object. They cover everything from the impractical to the insane. And Ashkahn reveals his love of robots… and sandwiches.

Accepting Insurance for Floats – DSP 352

There are rumors everywhere in the float industry about float centers billing insurance for floats and how they pulled it off. This podcast is no exception! 

Listen to Graham and Ashkahn opine on the hypothetical and the barely confirmed tales they’ve heard about the possibility of float centers getting that sweet sweet insurance payout, and then listen to the guys talk about the realities of accepting insurance and how it’s not all it’s cracked up to be.

Surviving a Recession – DSP 351

Graham and Ashkahn take on the unenviable task of talking about the harsh realities that the float industry will likely face in an upcoming recession, as well as how to be prepared for it. 

The guys discuss what it was like for Float On opening during 2010, and the pragmatic view of the things most likely to get cut and who will and likely won’t survive an economic downturn. 

How to Talk to New Float Enthusiasts – DSP 350

One of the most amazing things about the float industry is how open and friendly everyone is. Every float center we’ve ever talked to has stories about receiving help, advice, or information from another center or offering it themselves. It makes sense that float center owners would want to pass this goodwill on to the next enthusiast who comes knocking, but it can get a little time consuming talking to everyone. 

Graham and Ashkahn share advice on how to enthusiastically and efficiently talk to new floaters without burning yourself out or make it feel like you’re having the same conversation 100 times in a row. 

Latest Blog Posts

Announcing: The 2018 State of the Industry Report

Announcing: The 2018 State of the Industry Report

In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We’ve released one every year since, and this year we (once again) have the most contributions that we’ve ever had. In total, 293 existing...

2018 Conference Program Introduction

2018 Conference Program Introduction

It was absolutely our pleasure to, once again, host the Float Conference here in Portland. We couldn’t help but be slightly nostalgic remembering all the Conferences we’ve held, all the way back to 2012. Below is the complete introduction for this year’s program intro. While this may be our last year hosting, we look forward to what the rest of the industry has in store for us in the future.