Something in the world of floating have you stumped?
Show Highlights
Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.
On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them.
Show Resources
Today is the last day of the Float Conference! Go to Floatconference.com for info on speakers and scheduled events!
More information on twist locks and how they’re used
Leviton Twist Locks (Woodward Twist Locks are functionally identical if you come across those instead)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right. Hello everybody.
Jake: Hey, hey everybody. Ahoy. Ahoy.
Graham: I am Graham.
Jake: And I am Jake.
Graham: And we are continuing in the vein of construction questions we’ve been doing while Ashkahn away from the mic. Today’s is, “should I wire my tanks into the wall?”
Jake: Well, depending on how much power they draw, in some places you may be required to.
Graham: Yep, so you might not even have a choice.
Jake: Yeah.
Graham: Which makes the decision really easy.
Jake: Yeah.
Graham: Just, yeah. Don’t do it and skate under the radar. Simple.
Jake: Never ever ever do that.
Graham: Jake won’t even let me joke about it.
Jake: But if you can, if you do have the option and you’re allowed to not have your tanks hardwired in, we prefer not to have them hardwired in. We like to use a twist lock plug into the wall. That way it doesn’t back out. You know worst case scenario, the pumps turning off and on, that plug backs out a little bit. One of my staff are running through the room picking up like a float pillow or something like that. They look over, see it, and then they reach out and grab and shock themselves. We don’t want that. But we do want to be able to move things around. If want to take the tank out of the room, do a remodel or something like that, it’s easier to just unplug something than having an electrician come in and have to take it out of the wall for you.
Graham: Yeah, and I guess let’s explain what a twist lock is, and the different options for it.
Jake: Right.
Graham: So twist lock into the wall is different than a twist lock into kind of a corded plug.
Jake: Yeah, umbilical. Yeah.
Graham: But the mechanism is the same, which is basically instead of just plugging something in, they’re creating this gasket and sort of a water tight seal, and actually doing a little twist lock into making sure water can’t get in there.
Jake: And you have a couple choices here. You can either twist lock directly into the wall outlet, which is what we recommend. Or you can get two ends of a plug, an umbilical basically, sticking out of the wall, and then those twist lock together.
Graham: We used those for quite a while.
Jake: Yeah.
Graham: That was one of our go-tos. Over the years we’ve just seen them fail. You know not once but a handful of times.
Jake: You’ve gotten moisture in them. The ones that still exist at float on, we actually wrap them with silicon as well.
Graham: Yeah. I’m not sure if it’s when you first go to plug them in and they just had a little salt, they weren’t quite cleaned enough or whether, yeah, wicked in there, which I almost doubt.
Jake: I don’t know.
Graham: Yeah, I don’t know.
Jake: I think it’s we don’t know.
Graham: They failed and so we’re less keen on those now.
Jake: I think humidity’s building up inside there. Just enough to cause it to short out a little bit. Like it doesn’t fail catastrophically. We’ll just notice and all of a sudden there will be a smell and the plug is on its way to burning out. That’s when we kill all the power to everything.
Graham: Yeah, then you open it up and it’s definitely singed on the inside. Like it’s a little scary when you see that, understandably.
Jake: We’re in kind of a crazy environment, right? We’re using these tanks. They’re full of water. We’re connecting them to a power source. Like electricity’s kind of a scary thing.
Graham: We should say it’s crazy that even these things that are meant to be totally watertight and gasket together, those fail in our space. Again, it’s just a reason that we use the wall gasketing plugs.
Jake: Yeah, the twist locks into the wall. Something else-
Graham: Do we have a name brand for people that we recommend for people?
Jake: We use Leviton a few times. We’ve also used, I believe, Woodward as well. Both of them operate just pretty much the same.
Graham: Yeah.
Jake: Something else we consider is actually that tail connecting to your tank, that cord. We’ll have our swapped out with a SO cord. It’s an outdoor rated cord just because that can live in a wet environment. Whereas like your regular household lamp cord, that could fail over time. Basically, just has a much larger protective sheath around it, so you can never nick it or anything like that.
Graham: Yeah, I guess the benefits of, again, being able to unplug your tank at any given time is you can take it out to do maintenance, you can, if the plug is attached to the brains of the tank or the controller in the room, you can theoretically unplug that and move it and do repairs on that without having to un-hardwire to from the wall. Basically, a lot more flexibility. A lot more room for maintenance and repair without needing to do the work of actually unwiring something that’s directly hardwired into the building.
Jake: Because that’s a contractor’s job. I know it seems simple. You can undo three wires, but you really don’t want to mess with anything like that. Anything that’s wired in, connects to the grid, bring an electrician in, a licensed, bonded electrician.
Graham: And the reason is just even though it is simple, you might’ve even done repairs around your house or any number of different scenarios with electricity, but if your building were to catch on fire, if there were this accident electrically and you’ve done some electrical work that wasn’t done by a licensed electrician, all of a sudden who
Jake: Your claim might be denied.
Graham: Yeah, who’s on the spot.
Jake: Liability. Yeah. Insurance company’s not going to be happy about that. That’s for sure.
Graham: And if it could be traced back to anywhere near where you did the electrical work, then that speaks very poorly towards your chances of getting money out of that all of a sudden. That’s why it’s more just for protection in case the worst happens more than anything else. Not like we’re saying you can’t do it or anything like that.
Jake: Yeah, again, relatively simple but just hire somebody else to do it.
Graham: I get totally derailed on insurance side of things.
Jake: I’m scared of electricity.
Graham: Oh, so the upside of having it hardwired directly into the wall is, like we’re talking about, you know moisture getting in there or issues arising. I mean that’s pretty much eliminated for the most part.
Jake: Yeah, because that cord then goes into a junction box that you can have moisture-proof junction box and everything’s connected inside there. It has gaskets.
Graham: Yeah, yeah. You can really just eliminate that worry. Even with having a cord that is this gasket system that goes into a wall, there is still a chance that the part of the cord that’s going into the wall has some moisture on it or a little salt or same, you know, a drop splashed onto the wall at that point. Even though they’re high up off the ground, and now all of a sudden you can have a short. I don’t know. For peace of mind I would say is one of the things that-
Jake: For sure, peace of mind. I would add one more note here just on the placement of those actual junction boxes, those outlets. You know we want those high and tight. You know what I mean? Like we don’t want those down in the spray area where you’re priming your system or whatever you’re going to be spraying water all over the place. We’ve seen leaks develop in pretty much every single spa pack. Like there’s no spa pack that has not suffered a leak at least at one point in time. Either from a ball joint failing or from even, we saw a pinhole in some flex tubing. It just was shooting straight out several feet and one little stream of water. So, yeah, we really try to keep electricity as far as we possibly can away from clients and away from any wet zones.
Graham: Cool. Yeah, as to whether or not you should wire your tank into a wall, there are pros and cons on either side. For us, personally, we like, again, having the very protected outdoor certified gasket system that goes into the wall directly. For other people, you may be required to have it in the wall or you may just like the safety of it. There’s no right or wrong here is, I guess, what I’m getting down to. Oh, there is a wrong. The wrong is to just have, in my mind, your tank just plugged directly into wall.
Jake: No outlet even? Just like bare wires? Like that might not be the safest.
Graham: Just bare wires.
Jake: That might not be the safest.
Graham: Okay, so there are wrong answers, but maybe no absolute right answer.
Jake: One more note on us tanking our tanks out of our rooms. Keep in mind we are open 24 hours a day, so we do break down our tanks and do some deep cleaning on them and replace caulk lines and things like that. Or if we need to repair flooring in a room, it’s easier to get that tank out of the room. So we definitely break our tanks down from time to time.
Graham: Unfortunately, because it’s a huge hassle. Okay. If you have questions of your own, cruise on down to floattanksolutions.com/podcast.
Jake: All right. Thanks for having us.
Graham: Yep. Thanks everyone.
Recent Podcast Episodes
How do you Know What to Delegate and When? – DSP 164
The eternal small business challenge. You can’t be everywhere at once, but how do you decide what to delegate and to whom? Unfortunately, there’s not an easy solution, but there are some philosophies behind how you run your business and operate that may be helpful to review.
If you’re reaching this wall and you’re not sure what to do, think about how your work is laid out and what is required of you. Some things are naturally going to be more repetitive and have more built in redundancy. That’s a good place to start looking for delegating responsibility, but it doesn’t have to end there. It all just takes time.
Graham and Ashkahn get into the Float On way and how it’s come about that they’re the owners, but don’t run the shop and are no longer making the major decisions in running it as a business. Worth a listen even if you’ve never even seen a float center before.
Float Room Construction Costs Specifics – DSP 163
In this episode, Graham and Ashkahn succinctly breakdown the cost of float room construction. The average float room cost per the industry survey is $75,000 per room. How much of that is float tank cost and how much is construction? There are some variables to consider based on geography and types of tanks, but the guys lay out the average and clarify some of the numbers we’ve released previously.
How to Delicately Handle Difficult Customers – DSP 162
Sometimes there’s just that one customer. The “Problem Child” customer that you don’t like having to deal with. The one who totally know is definitely (probably) making things up to try and get a free float. And they’re such a nuisance! What can you do about that? Obviously you don’t want them getting vengeful if you tell them to kick rocks and spread lies about you.
How do you handle that situation? Well, Graham and Ashkahn lay out some nice ground rules for how they handle people and it comes down to setting clear boundaries that at least appear rigid on the outset. Then, if those boundaries are crossed, the reactions you have are totally expected.
What’s the Difference Between a Residential and Commercial Float Tank? – DSP 161
Ashkahn and Graham break down the differences between float tanks designed for home use in comparison to ones intended for a commercial setting. Depending on how it’s intended to be used can drastically affect the construction of the tank. Most home use tanks, for example, aren’t made of fiberglass, because those large, rigid structures are difficult to move by yourself or just with one other person. Likewise, the filtration demands for a home use tank are a lot different.
Listen in and check out all the differences and which tanks are more intended for use at home as opposed to commercial use.
Do Floaters really Go into a “Theta State”? – DSP 160
Sometimes it’s difficult to differentiate the claims of scientific benefit of floating from those that are just anecdotal. The idea that floating causing greater theta brainwave activity is one of those things that sounds right, but what does the data say? And how can everyone else find out?
Fortunately, Graham and Ashkahn have done the legwork and even talked to the researchers who do this kind of stuff. They break down exactly how true the Theta claim is and what, if any, real research corroborates it.
Latest Blog Posts
Prepayment for Floats
Do you make people pay when they schedule an appointment?
We at Float On always strive to be as easy to deal with and non-intimidating as possible, so from the very beginning we have allowed people to book floats over the phone without payment. READ MORE…
The Difference Between Night and Day
We've all heard the expression, “It’s like the difference between night and day.” The term is used to draw extreme contrast. How much different is our experience of nighttime and daytime? How does it affect how we live? How we work? How we interact with our...
A Peek at the Float On Renovation
Well, we did it again. We've been closed for 2 weeks of construction already, and we still have another week to go. We're installing two new flooring and shower systems to test out, a new lobby wall for soundproofing, and we're replacing one of our Ocean Float Rooms...
The Best Time to Start a Float Center (response)
I usually don't share the responses I get from our posts, but they always spawn great conversations. After this last one, I got hit with more emails than usual, and I wanted to share one of them with you which is representative of many of the others. I've been...
