Something in the world of floating have you stumped?
Show Highlights
As it turns out, there’s no certification program to running a float center. You buy these big expensive machines that require constant, technical maintenance and you’re on your own for how to accomplish that. There aren’t float tank repair persons that you can call (yet) and just have them show up and do it for you, so making sure you’re knowledgeable and prepared for this maintenance is a really good idea.
Graham and Ashkahn lay out the Float On best practices for how to plan for maintenance so that it’s the least disruptive for your center if something goes wrong.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question for you is, “We want to do some tank maintenance, but we’re worried we’re going to mess everything up.”
Yeah, that’ll do you.
“Should we take things apart just to do it, or should we go with the old adage of, if it ain’t broke don’t fix it?”
Ashkahn: Alright, that’s very general. I wish I knew a little bit more specifics about what they were talking about, but you know. You can’t let fear hold you back! I mean, that’s my general answer.
Graham: Yeah, and there’s just some maintenance that needs to be done, you know?
Ashkahn: So you can’t-
Graham: You can’t wait for things to break either.
Ashkahn: Yeah, the solution shouldn’t be “just don’t touch anything and avert your eyes and pretend like everything’s fine.” So yeah, you should probably do the maintenance you think is important that you should be doing.
Graham: Yeah, and the fact that it’s called “maintenance” and not like, just abstract upgrades, or you know, “I have this sick idea to pimp out my float tank.” Like, should I leave well enough alone-
Ashkahn: Unnecessary labor.
Graham: Yeah, yeah. But you know, things like, yeah, actually … like we talked about during a different episode … draining your tank, and cleaning it out on the inside and refilling it every so often, making sure to get the inside of the pipes. Things like changing your impeller, changing UV bulbs.
Ashkahn: Cleaning the impeller.
Graham: Whoa, did I say changing the impeller?
Ashkahn: Yeah. You don’t need a new impeller, but-
Graham: Cleaning the impeller, getting all the hair out of there. And all of that is regular maintenance that does feel a little intense when you’re doing it for the first time, like actually taking apart your pump, and breaking spindles in the middle of the night, and stuff like that. You know.
Ashkahn: So here’s the deal. Here’s the deal, is when you-
Graham: Break it down for us, Ashkahn!
Ashkahn: Break it down here! When you’re doing maintenance, I think there’s two things that I like to keep as general rules that make all of this go a little bit easier. One of them is to only do one thing at a time. If you have to like change the UV bulbs on all five of your float tanks, or something, do one UV bulb per week. Don’t just spend one day being like, “I’m just gonna do all five tanks at once,” because you know when you do stuff like this, there is a pretty decent chance you’re gonna mess something up.
And even if you don’t mess anything up, like you put it all back together, and it’s just kind of leaking all of a sudden. And there’s just stuff like that happens, like way more than you would want or think that it would. And sometimes it’s to the point that your float tank is kind of down. You’re gonna need to spend a few days fixing it.
So, only doing one thing at a time allows it so that, one you have time to deal with stuff when it goes wrong, and also, if, in the worst case scenario, something happens to some point that you do actually have to cancel floats for that next day or two days or something, if you just have one float tank down that’s a lot easier than having all of your float tanks down all of a sudden. You may be able to scoot appointments around to the point where you don’t even actually have to call and cancel on anyone, if you’ve just got one float tank down.
So that’s usually what we like to do. We never took on more than one maintenance task like that for our float tanks per week. And the other thing that is a really nice rule to kind of keep is basically, usually this maintenance has, there’s a certain amount of pieces in whatever machinery you’re taking apart that are really easy to break. So like when you’re replacing UV bulbs, the glass tube around the UV bulb, the court sleave, or the bulb itself, or basically giant long pieces of thin glass, those are easy to break. In pumps, there’s usually like a little porcelain spindle kind of holding the impeller in place. That thing’s really easy to break.
Graham: Really easy to break, yeah.
Ashkahn: See, we’ve broken so many of them! So, I kind of have it as a rule that we do not ever open anything. A pump, a UV light, we don’t unscrew or start messing with anything, unless I have spares of those fragile pieces already on hand. Because the spares are usually pretty cheap, you know, those spindles cost like ten dollars. But not having one and breaking one means it’s three days, or four days before you’re gonna have to get that emergency shipped to you, and that’s just like three or four days that your float tank is down.
So that can be a really big difference in how screwed you are when you break something. So, those are kind of main things, don’t do more than one thing a day, and if you ever touch anything, make sure you already have spares of the fragile parts available to you.
Graham: Yeah, and if you’re really nervous, or it’s expensive machinery that you’re talking about here, like actually doing maintenance on your UV system, or doing maintenance on your pump, it doesn’t hurt to look online for the manual, to check in with the manufacturer. They have technical departments that you can talk to and make sure that you’re doing things right. Like taking apart your pump, you actually need a calibrated torque wrench, where you can like exactly know how many pounds of pressure that you’re putting into-
Ashkahn: Sometimes, sometimes. Not all times.
Graham: Yes, okay, fine. Some pumps you need that, right? And if you don’t know which pump they are, it can cause problems.
Ashkahn: That’s true, yeah, you can tighten things and it’ll like warp the-
Graham: The actual pump housing. And that, you need an entire spare pump to fix. So don’t be afraid to reach out for help and guidance, too, again both from manuals, and from technical departments.
Ashkahn: And you’re really gonna be surprised how few parts are inside of these pieces of equipment, than you think. Like the first time I took a pump apart I was like, “Oh boy!” And I opened it, and I’m like, “Wait, there’s three pieces in here? That’s it?”
And like a UV light, a lot of people’s UV lights, those kind of Delta UV ones and stuff, if you open up those, it’s literally just a tube. There’s like a glass tube and a light bulb in it, and the rest is just a big, open, empty, hollow cylinder. Like so you know, it’s nice. It’s nice to like understand what these things are and how they work, and that way, in the future, if you notice something is having a problem, you probably have a better chance of kind of understanding what’s going on, and understanding if it’s important or if it can wait. Getting comfortable with your equipment is really useful.
Graham: Yep, and the first time that you change your UV sheaths and bulb, just plan on having like two backups or something like, those are often the easiest things to break. I think in our shop, that’s like the biggest kind of serious maintenance thing that has gone wrong, yeah, just over and over again.
Ashkahn: Broken a lot of spindles, too! Yeah, and separate the UV thing. If you’re worried about breaking glass, you don’t want it to be connected to the rest of your float tank system, so if you do break something you can like totally flush it out and clean it without any concern of any glass getting into your float tank.
Graham: Yeah, that.
Ashkahn: I mean yeah, we can … If we had more specific idea of what-
Graham: Maintenance-
Ashkahn: What you’re trying to do, we could give a more specific answer, but in general, that’s it. Like do it, it’s probably not gonna be quite as crazy as you think, but make sure you’re going into it-
Graham: Plan for the worst.
Ashkahn: -prepared. Yeah, yeah. Make sure the worst case scenario is not gonna totally screw you over and bring all your float tanks down.
Graham: And don’t wait for something to break. I mean, doing regular maintenance is absolutely the way to extend the life of your float tanks, and pay the least amount of money, and stuff like that.
Ashkahn: And it’s good, what we do at our shop is we take all this bigger routine maintenance and we just, we schedule it out across a year. So we’ll use like our Helm software with these task generators, and set these things to show up, like these tasks, to pop up one week apart. So, we’ll go through six weeks of clean the impeller in room one, and then clean the impeller in room two, and then clean the impeller in room three, and then six weeks of changing our UV bulbs, and then six weeks of draining and filling our tanks one tank at a time.
And as we do, you know … and there’s enough stuff like, that to kind of like every week, there’s one big task that needs to be done. And so if you, yeah, you can actually sit down and kind of plan out like your year of maintenance.
Graham: Cool, and if you have anymore questions for us, head on over to floattanksolutions.com/podcast.
Recent Podcast Episodes
Are Tankless Water Heaters the Best? – DSP 270
Graham and Jake take on talking about Tankless or “On Demand” water heaters today. They break down a lot of the benefits of them compared to storage water heaters like the fact that they provide a nearly limitless source of hot water, require less energy consumption, etc. They’re not perfect though, and any float center considering one should look closely on how best to implement them. Jake shares some of the pitfalls of them as well as how to maximize their usefulness.
Should Float Centers use Light or Heavy Gauge Studs? – DSP 269
Still no Ashkahn today. He’s taking a couple of post-conference days to himself.
Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs.
Construction to Make Your Life Easier – DSP 268
Graham and Jake cover a wide range of construction tips to make running a float center easier. Everything from making sure you have extra storage to installing mop closets with sinks in them for dealing with heavy duty chemicals.
The advice is pretty much a shotgun approach of tips, tricks, and hard lessons learned throughout the years.
Draining Float Tanks into Septic Systems – DSP 267
Graham and Jake tackle the difficulties of draining float tanks and how that process can differ based on different municipalities, different water treatment systems, or whether you’re using a septic system or not.
Water treatment typically involves whole contained ecosystems and highly concentrated epsom salt water can impact that pretty drastically. The guys provide good tips for each type of system and what to be prepared for if you’re operating in a rural area with a septic system.
The Difference Between STC and Decibels – DSP 266
Post-Conference Ashkahn is still out of the recording studio, but fortunately Jake is keeping Graham company in there.
Graham and Jake break down the differences between decibels and STC ratings, two very important to understand when figuring out soundproofing. There’s a lot to digest in this episode, but fortunately the guys keep it easy to understand by providing a broad level overview of the different concepts.
Latest Blog Posts
The Float Tour Blog – Issue #28
Home sweet home! After so many months on the road, it was strange being back here in Portland. We were exhausted, excited, and a little travel weary. The first night back, I slept in my own bed for the first time in three months and the world just melted away.
Having travelled across the United States, I’m reminded of how insular Portland is. We are aggressively fixated on keeping things local. Local beer, ketchup, bikes, pet food, pillows, phone cases… it’s part of our charm. We want to reward people for living here and being a part of the community. It’s so pervasive that, after living here for so long, I kind of forgot that Secret Aardvark hot-sauce isn’t available everywhere, and that most cities don’t even recycle, let alone compost.
The Float Tour Blog – Issue #27
Our northern neighbor – a sister city, of sorts – Seattle is the largest metropolitan area in the Pacific Northwest. It’s the land of Microsoft and Kurt Cobain, and the culture here embraces both simultaneously. It’s tech business professional in the front and rock n’ roll grunge in the back. This blend creates a perfect storm of high energy business life and high energy nightlife, making relaxation a valuable commodity. Floating helps fill the void left by nightmarish traffic and overcrowded restaurants.
Given that it’s so close to home, the float centers in Seattle are a lot more familiar to us. Our visits here were more like a high school reunion than they were like the first day of school. During some of our visits, we were picking up conversations right where we left them.
The Float Tour Blog Issue #26
Vancouver is the largest metropolitan area in Canada, and third largest on the West Coast. It’s a major hub for international trade, with one of the largest ports in the world, giving it a large migrant population, mainly from Asia, the Middle East, and Australia. It’s also been a long-time home to the Canadian film industry, and has even been nicknamed “North Hollywood.” Dozens of film and television productions from major studios film here every year.
Vancouver is very much an international city. It has large boroughs dedicated to varying cultures, including one of the largest Chinatowns in the world. The society here is more receptive to new ideas, always looking for the next big thing; it’s not surprising that floating has blown up in Vancouver as much as it has.
In the last 3 years, 10 float centers have opened up, most of them being larger 4–6 tank centers. The really interesting thing is how they all opened within the same short amount of time about 1 ½ to 2 years ago, within months of each other.
The Float Tour Blog – Issue #25
We finally made it back to the West Coast! We went through the Canadian Rockies and were overwhelmed by the beauty of it all. We drove through hours and hours of winding mountain roads, fertile valleys, and tiny towns so picturesque they looked like movie sets. It was so captivating, in fact, I suspect Graham and Ashkahn may have secretly replaced themselves with robotic doppelgängers to hike throughout Banff.
This post will focus on the smaller communities in B.C. that are bringing floating to new people every day. We also get to visit Canadian manufacturer Pro Float. They’re relatively new to the scene, just opening up earlier this year – another exciting sign of the growth in the industry.
