Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello everybody. I am Graham, once again holding down the fort here alone in the studio. I guess not alone, Jordan is also here, but he’s just not in front of the mic, he’s behind the mic. He’s actually making some really animated faces right now. What’s that? You’re giving every listener $10? That’s really generous of you. Just go to floattanksolutions.com/jordanowesmemoney.
Getting back to the actual episode, boy is there a question today. It’s a really long one, and it takes a little explanation too, at the very beginning. So, it’s a long question with a footnote. Let’s just go ahead with it.
“Hi”, first of all. Hello. “What do you encourage your tacos and taco supremes to do when someone wakes and starts showering in a time of limbo?”
First of all, instead of managers and regular level employees, we call them taco supremes and tacos, is the background there. Time of limbo, I assume he means that time after you die but before you’re actually in your assigned afterlife. So, when you’re actually in this beyond living and death state, or just maybe a transition between floats. Not exactly sure.
“By that, I mean five to ten minutes before the scheduled time to start playing the music.” Okay, so I guess it was time between floats. “I understand that short floats can be good, and I’ve found that, especially for the first time, a 50 minute float can be the norm, as people’s minds start wondering about the wake up music. Thinking they are done with their floats, I wish to start their pumps so that the water can filter and thus start getting the room ready for the next client. However, my concern is that they are showering for excessive salt in the face or they just wanted to check their phone and intend on hopping back in until they hear the music. Just trying to find the balance for myself and recommendations for staff between being efficient in the workspace while not being totally invasive to the person and their session”
That was a big one. Basically, it’s just coming down to someone gets out of their float early, before the scheduled wake up music to come on to actually end their float, what do you do? Do you turn on the music early? Do you assume they’re getting out and run the pump so that you can actually get the next person in, maybe with a little more time? What is the right ethical and moral answer? I’m not too divided, and I’m the only one here so that’s really all that matters. I would say just don’t turn on the music initially. Turn it on at the scheduled time. Don’t turn on the pump early. If they come out of the room and they say yes, I’m totally done with my float, I’m not going back in that room, for sure turn on the pump or anything else, assuming that it doesn’t interfere with anyone who’s still in the tanks. At Float On this is another level to this problem. Even if people get out early at our shop and we know that they’re out of the room, our rooms are still right next to other rooms that usually have other people floating in them, so we can’t really turn on our pump equipment anyway, just because it would pass right into the tanks next door.
So, in our case it’s not a bonus even if we know that they have come out, but again, the customer is paying money to come in, or even if it’s a free float, it’s a free full length float, whatever that means for you, an hour or an hour and a half. So, if someone is out and showering, especially if it’s just 10 minutes beforehand and you think that they’re getting out anyway, don’t assume anything. It’s way better to, yourself, just have to rush a little bit more during transitions or again, get the next customer in on time as opposed to early. Way better to do that than to anger a customer by assuming that they’re done with the float. If you weren’t actually done with the float but the pump turns on while you’re in the shower, just getting salt out of your eyes, I’d feel a little bit rushed or almost that my calming experience was being pushed on a little bit excessively from the outside.
In things like this, I think, especially as a business owner, it’s important to really think of the needs of the customer ahead of just your own, or even the customer who’s coming in next. In this case, again, don’t worry too much about whether they’re coming out early or not. Your reaction should just be the same, which is assume that they’re staying in there full time. Turn on the music once they’re actually out, or turn on the pump again if you are able to run it, once you know for sure they’re out of the room. That’s it. Good, I hope that was satisfying.
If you have your own short or lengthy questions to send our way, cruise on over to floattanksolutions.com/podcast and I’ll be joined back in the studio in just a couple days with my co-host Ashkahn. Have that to look forward to. All right everyone, have a good one out there. Talk to you tomorrow.
Recent Podcast Episodes
Surface Disinfectant for Tank Walls – DSP 335
What’s the best way to clean the inside of a float tank? And what sort of product should you use?
It turns out that this deceptively simple line of questioning has a major explanation involved. Ashkahn and Graham share what they’ve learned at the World Aquatic Health Conference about surface disinfectant and the best way to protect your float rooms.
Putting a Shower in A Separate Room – DSP 334
Most float centers run a tight schedule with narrow margins for the transitions between floats. Oftentimes relying on their customers to take reasonably timed showers to fit that schedule. If a single customer takes a shower that’s a bit too long, it can throw of the schedule for the rest of the day!
What if showers were in a separate room? Then customers could shower as long as they want! Ashkahn and Graham explain why this is an extremely bad idea.
Having Doors Open into the Hallway – DSP 333
Float centers, more so than some other brick and mortar businesses, tend to be desperate for maximizing the efficiency of their space. And float rooms would have so much extra space if they didn’t have to deal with a door swinging in and out all the time. Why don’t float centers do it this way instead?
Well… Graham and Ashkahn explain exactly why centers don’t do this already, along with the vast majority of other buildings being made currently. It’s likely a code violation and even if it weren’t, it’d probably be unnecessarily hazardous to travel through your center that way.
Using H2O2 Instead of Chlorine – DSP 332
Let’s say you buy a center and want to use H2O2 instead of the chlorine that was being used by the previous owner. Or maybe you want to switch over to H2O2 after using chlorine for a while. Let’s further assume that this is in compliance with your health department and your UV system is sized adequately. What else do you need to know to make this happen? Do you need to change the water?
Ashkahn and Graham lay out all the things to consider and why someone may or may not want to replace the solution in their tank at the same time as replacing the water treatment method in a float tank.
How to Sell a Float Center – DSP 331
It’s not an easy decision to sell a float center. But when you do come up to that point, what do you do? Who do you talk to and how does it work? Should you hire on a broker? What sort of timeline should you expect?
Having never sold a business, Graham and Ashkahn aren’t exactly experts on the subject, but they offer informed advice on where to sell and how long it’ll probably take.
Latest Blog Posts
The Relationship Between the MAHC and Float Tanks
The MAHC stands for the Model Aquatic Health Code. This is a document put out by the Centers for Disease Control that is a set of guidelines for recreational water sanitation and operations.
The MAHC is what is called a “model code,” which means it is not a regulation in and of itself. Instead, the CDC puts out the MAHC as a document which they consider to be a really nice set of code language for recreational water facilities (mostly pools and spas). The MAHC includes everything from the process of getting permits…
The Daily Solutions Podcast – Our Top 5 Episodes from January
We’ve gone through yet another month and Graham and Ashkahn still haven’t split the podcast studio in half with paint and declared a Cold War on each other. Maybe next month. In the meantime, we’ve collected some of the gems from January (heretofore to be known...
A New Year, a New Research List
When we first released the floatation research list back in 2011, it was as close to a comprehensive list as we could create. It was put together in an effort to illustrate that sensory isolation was a thoroughly studied practice and there was scientific evidence for the health claims we were making.
Many float centers adopted this list for their own uses and put it on their sites, spreading the information and making it more available.
In this post, you’ll learn about the updates made to our float research list.
The Daily Solutions Podcast – Our Top 5 Episodes from December
Since a new episode is released, every day, we thought we should do a roundup of some the top episodes so far to keep you from missing out on important topics in the floatation community.
Behold the creme de la creme of podcastery, if you will. Here they are, in chronological order
