Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.

Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: All right. Hello, once again. My name is Graham and I am the only one here. Start to get a little stir crazy after a while when you’re the only one in the studio answering questions about float tanks. I don’t know if that’s a documented neurosis or something, but it should be. Anyway, we have another question today for me from you and it is, “is there a best time of year to open up a float tank center, either a best season or a best month?”

Yeah, I think there is, I think there is a pretty acceptably good time of year in general to open up. We, when we were opening Float On, we actually opened October 17, and I think that that’s pretty darn near perfect, and we just kind of lucked into it. That wasn’t pre-planning on our part or anything like that. But especially for here in Portland, but largely everywhere, you’ll see a general attendance dip in the summer, universally referred to as the summer slump. And even in places that are kind of hot year round, you’ll see a little bit of a dip, especially in June and again in September, maybe not as much during the main hot months of the summer. But for places that have hard winters or just long winters, when it starts to get sunny outside, attendance in flat tank centers just kind of naturally drops off. I think a lot of people want to be outside on trails or out on lakes or rivers or oceans and not in a building in a room in a box inside their own head, literally the most inside that you could possibly be.

So summer tends to be a big drop off, and similarly and very predictably winter and specifically December is a really strong time of year. So December, for a lot of the float tank centers that I talk to tends to double their general sales for a month. And certainly the case with Float On. And that’s pretty much all in gift cards. So we’ll do the normal volume of sales in a month just in gift cards in December in addition to all the other floats that we’re running. So December is always just a huge month for us. So, that kind of sets the parameters for what we’re looking for for an open date is stay the heck away from the harsh summer months.

Our first summer felt like the first winter over here from the Pilgrims. Just like, man, if we can survive this first harsh summer, we’ll make it through. So, yeah, avoid the harsh summer and open in time to take advantage of the kind of influx of December gift card sales. So, yeah, for us here in Portland, the kind of summer heat winds down late September going into October, and of course December is always in December, so opening some time in that October/November range, at least for the Portland area is ideal. And for most places, too, sometime in there. September, October, November, I would say that’s really the best time of year to open if you can.

And the problem with that that we keep seeing is that construction tends to run over when you’re opening a float tank center. So if your goal is to open in October/November, it’s just a really common story for the contractors run late, they miss an inspection, whatever happened and now that October/November opening got pushed back to December/January, which then got pushed back to January/February, and all of the sudden you’re opening in the beginning of the new year. You’ve kind of missed some of the winter sales and now it’s the longest time period that you’ll have between when you open and the next December will roll around. So as far as actually opening your doors and doing business, certainly getting open October/November is the ideal, but nowadays, I kind of recommend people plan on opening for more like maybe June/July, and when things almost inevitable do run long, you kind of accidentally end up opening in the best time of year anyway. And if you open during the light times of month, treat it like a soft opening. You might not bring in as much immediate revenue as if you had opened straight on the ground running right into the fall months, but again, way better to kind of plan on opening a little earlier in the summer months, and then stagger your way into December, then planning on opening close to December and missing it altogether.

I think, I was just trying to think if there was anything else. I think that’s pretty much all I have to say about the best time of year to open. Def let me know if the trend is different where you are. Certainly places that have hotter summers or hotter winters in addition to hot summers tend to see less of that summer dip, but almost everywhere that I talk to, there still seems to be some kind of decline that happens especially around June and September, so if you can avoid that, all the better.

And yeah, if I’m totally wrong, go to floattanksolutions.com/podcast and let me know all about how things work differently where you are and we will talk to you tomorrow, hopefully with Ashkahn hot in tow. All right, is that even an expression? Hot in tow? I started saying that and I was like, I don’t even know if that’s a thing. Obviously I need Ashkahn around, it will be good having him back and good having you back listening to us tomorrow. All right. All right. For reals this time. Bye everyone.

Recent Podcast Episodes

Should Float Centers use Light or Heavy Gauge Studs? – DSP 269

Still no Ashkahn today. He’s taking a couple of post-conference days to himself.

Jake and Graham are on the scene though to answer construction questions, though. Even the straight forward ones, like today. Jake informs us which to choose when doing construction, light or heavy gauge studs when constructing a float center, while getting a little sidetracked when comparing wooden and metal studs. 

Construction to Make Your Life Easier – DSP 268

Graham and Jake cover a wide range of construction tips to make running a float center easier. Everything from making sure you have extra storage to installing mop closets with sinks in them for dealing with heavy duty chemicals.

The advice is pretty much a shotgun approach of tips, tricks, and hard lessons learned throughout the years. 

Draining Float Tanks into Septic Systems – DSP 267

Graham and Jake tackle the difficulties of draining float tanks and how that process can differ based on different municipalities, different water treatment systems, or whether you’re using a septic system or not. 

Water treatment typically involves whole contained ecosystems and highly concentrated epsom salt water can impact that pretty drastically. The guys provide good tips for each type of system and what to be prepared for if you’re operating in a rural area with a septic system. 

The Difference Between STC and Decibels – DSP 266

Post-Conference Ashkahn is still out of the recording studio, but fortunately Jake is keeping Graham company in there. 

Graham and Jake break down the differences between decibels and STC ratings, two very important to understand when figuring out soundproofing. There’s a lot to digest in this episode, but fortunately the guys keep it easy to understand by providing a broad level overview of the different concepts. 

Should I Wire my Float Tanks into the Wall? – DSP 265

Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.

On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them. 

Latest Blog Posts

The Float Tour Blog – Issue #28

The Float Tour Blog – Issue #28

Home sweet home! After so many months on the road, it was strange being back here in Portland. We were exhausted, excited, and a little travel weary. The first night back, I slept in my own bed for the first time in three months and the world just melted away.

Having travelled across the United States, I’m reminded of how insular Portland is. We are aggressively fixated on keeping things local. Local beer, ketchup, bikes, pet food, pillows, phone cases… it’s part of our charm. We want to reward people for living here and being a part of the community. It’s so pervasive that, after living here for so long, I kind of forgot that Secret Aardvark hot-sauce isn’t available everywhere, and that most cities don’t even recycle, let alone compost.

The Float Tour Blog – Issue #27

The Float Tour Blog – Issue #27

Our northern neighbor – a sister city, of sorts – Seattle is the largest metropolitan area in the Pacific Northwest. It’s the land of Microsoft and Kurt Cobain, and the culture here embraces both simultaneously. It’s tech business professional in the front and rock n’ roll grunge in the back. This blend creates a perfect storm of high energy business life and high energy nightlife, making relaxation a valuable commodity. Floating helps fill the void left by nightmarish traffic and overcrowded restaurants.

Given that it’s so close to home, the float centers in Seattle are a lot more familiar to us. Our visits here were more like a high school reunion than they were like the first day of school. During some of our visits, we were picking up conversations right where we left them.

The Float Tour Blog Issue #26

The Float Tour Blog Issue #26

Vancouver is the largest metropolitan area in Canada, and third largest on the West Coast. It’s a major hub for international trade, with one of the largest ports in the world, giving it a large migrant population, mainly from Asia, the Middle East, and Australia. It’s also been a long-time home to the Canadian film industry, and has even been nicknamed “North Hollywood.” Dozens of film and television productions from major studios film here every year.

Vancouver is very much an international city. It has large boroughs dedicated to varying cultures, including one of the largest Chinatowns in the world. The society here is more receptive to new ideas, always looking for the next big thing; it’s not surprising that floating has blown up in Vancouver as much as it has.

In the last 3 years, 10 float centers have opened up, most of them being larger 4–6 tank centers. The really interesting thing is how they all opened within the same short amount of time about 1 ½ to 2 years ago, within months of each other.

The Float Tour Blog – Issue #25

The Float Tour Blog – Issue #25

We finally made it back to the West Coast! We went through the Canadian Rockies and were overwhelmed by the beauty of it all. We drove through hours and hours of winding mountain roads, fertile valleys, and tiny towns so picturesque they looked like movie sets. It was so captivating, in fact, I suspect Graham and Ashkahn may have secretly replaced themselves with robotic doppelgängers to hike throughout Banff.

This post will focus on the smaller communities in B.C. that are bringing floating to new people every day. We also get to visit Canadian manufacturer Pro Float. They’re relatively new to the scene, just opening up earlier this year – another exciting sign of the growth in the industry.