Something in the world of floating have you stumped?
Show Highlights
Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.
Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right. Hello, once again. My name is Graham and I am the only one here. Start to get a little stir crazy after a while when you’re the only one in the studio answering questions about float tanks. I don’t know if that’s a documented neurosis or something, but it should be. Anyway, we have another question today for me from you and it is, “is there a best time of year to open up a float tank center, either a best season or a best month?”
Yeah, I think there is, I think there is a pretty acceptably good time of year in general to open up. We, when we were opening Float On, we actually opened October 17, and I think that that’s pretty darn near perfect, and we just kind of lucked into it. That wasn’t pre-planning on our part or anything like that. But especially for here in Portland, but largely everywhere, you’ll see a general attendance dip in the summer, universally referred to as the summer slump. And even in places that are kind of hot year round, you’ll see a little bit of a dip, especially in June and again in September, maybe not as much during the main hot months of the summer. But for places that have hard winters or just long winters, when it starts to get sunny outside, attendance in flat tank centers just kind of naturally drops off. I think a lot of people want to be outside on trails or out on lakes or rivers or oceans and not in a building in a room in a box inside their own head, literally the most inside that you could possibly be.
So summer tends to be a big drop off, and similarly and very predictably winter and specifically December is a really strong time of year. So December, for a lot of the float tank centers that I talk to tends to double their general sales for a month. And certainly the case with Float On. And that’s pretty much all in gift cards. So we’ll do the normal volume of sales in a month just in gift cards in December in addition to all the other floats that we’re running. So December is always just a huge month for us. So, that kind of sets the parameters for what we’re looking for for an open date is stay the heck away from the harsh summer months.
Our first summer felt like the first winter over here from the Pilgrims. Just like, man, if we can survive this first harsh summer, we’ll make it through. So, yeah, avoid the harsh summer and open in time to take advantage of the kind of influx of December gift card sales. So, yeah, for us here in Portland, the kind of summer heat winds down late September going into October, and of course December is always in December, so opening some time in that October/November range, at least for the Portland area is ideal. And for most places, too, sometime in there. September, October, November, I would say that’s really the best time of year to open if you can.
And the problem with that that we keep seeing is that construction tends to run over when you’re opening a float tank center. So if your goal is to open in October/November, it’s just a really common story for the contractors run late, they miss an inspection, whatever happened and now that October/November opening got pushed back to December/January, which then got pushed back to January/February, and all of the sudden you’re opening in the beginning of the new year. You’ve kind of missed some of the winter sales and now it’s the longest time period that you’ll have between when you open and the next December will roll around. So as far as actually opening your doors and doing business, certainly getting open October/November is the ideal, but nowadays, I kind of recommend people plan on opening for more like maybe June/July, and when things almost inevitable do run long, you kind of accidentally end up opening in the best time of year anyway. And if you open during the light times of month, treat it like a soft opening. You might not bring in as much immediate revenue as if you had opened straight on the ground running right into the fall months, but again, way better to kind of plan on opening a little earlier in the summer months, and then stagger your way into December, then planning on opening close to December and missing it altogether.
I think, I was just trying to think if there was anything else. I think that’s pretty much all I have to say about the best time of year to open. Def let me know if the trend is different where you are. Certainly places that have hotter summers or hotter winters in addition to hot summers tend to see less of that summer dip, but almost everywhere that I talk to, there still seems to be some kind of decline that happens especially around June and September, so if you can avoid that, all the better.
And yeah, if I’m totally wrong, go to floattanksolutions.com/podcast and let me know all about how things work differently where you are and we will talk to you tomorrow, hopefully with Ashkahn hot in tow. All right, is that even an expression? Hot in tow? I started saying that and I was like, I don’t even know if that’s a thing. Obviously I need Ashkahn around, it will be good having him back and good having you back listening to us tomorrow. All right. All right. For reals this time. Bye everyone.
Recent Podcast Episodes
What are UL Field Evaluations? – DSP 124
A UL Field evaluation is something that can be requested from your Health Department or regulator, often prior to opening. It’s designed to ensure a certain standard for electrical equipment in commercial businesses. Graham and Ashkahn break down the process of getting a UL Field evaluation, how much it’s likely to cost, and even some tips when discussing this with your health department.
What is HDPE? – DSP 123
So HDPE stands for High Density Polyethylene. It’s a type of plastic and it’s incredibly handy for float centers. Float On switched to using this any place they previously would’ve used wood in their building materials.
Graham and Ashkahn break down exactly what this miracle product is, where you can buy it, all the different uses it has in a float center, and some special tips and tricks of getting it just the way you need it.
Causes of Float Related Neck Tension – DSP 122
The good news is that it doesn’t seem to happen after the first float, the bad news is we’re not really sure why it happens, but we have some theories. This even happened to Ashkahn the first time he floated, so this is an issue very personal to his heart.
Thoughts on Attending Trade Shows – DSP 121
When you’re just starting out, you’ll try anything to get the word out. Trade shows are a fairly common way to generate interest in a new technology or practice, so why not floating?
Graham and Ashkahn have a few trade shows under their belt and they’ve had modest almost success at them. They lay out their experiences and challenges that float tanks face at a venue like this and what you should be prepared for if you decide to attend one.
When it’s Time to Fire Your Customers – DSP 120
This is one of those situations that’s never fun to be in, but it’s something that’s gotta be dealt with. A customer is rude, unpleasant, or makes the staff or other customers uncomfortable. It can start small and turn into a repeated and difficult problem. As the business owner, oftentimes, the buck stops with you and you have to figure out how to handle that situation.
Graham and Ashkahn share their experiences at Float On with their problematic customers and how they handled it while offering tidbits of advice.
Latest Blog Posts
Start-a-Center Giveaway 2013
While we wait for the next month of blog posts to roll in, I wanted to announce a thank you promotion we're putting out. We've had over 500 items downloaded from our site since we started just a couple months ago, which means the industry is growing. The feedback...
An Autobiography of Floataway
I was always interested in making things and taking things apart. So after A levels in Physics, Chemistry and Maths, I chose Mechanical Engineering at Bristol University, UK, My first floating experience was in an inflatable toy boat before I could swim, and it was...
An Introduction from Sweden
Anu Enok Looking back, I realize that I’ve been a ”seeker” most of my life. I have always ”wanted to know what to find around the next corner”, which means I have tried a lot of things. I have been mixing jobs and studies. I have studied different stuff like market...
A Little Past
In the late 1960's, I was a systems computer programmer. At one point, I was in a department with just two other people. If I went down to the cafeteria with one of them, I would talk. But if I went down with both of them, I was too shy, and I would be silent. In...
