Something in the world of floating have you stumped?
Show Highlights
Graham goes solo today while awaiting Ashkahn’s return.
Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello, everybody. My name is Graham, and that’s it, my name’s Graham. There’s no one else in the studio here with me today. Ashkahn’s gonna be back very shortly, and we’ll have the old Grashkamn duo.
But, for now, I’m just gonna launch right into answering today’s question, which is: “You mentioned not to use cement board when using tiles on the wall. What is the reason for that?”
There’s a couple good reasons, besides just we said so. They are related to soundproofing, and then salt, I guess, like so much else in the float world. The salt aspect, I guess we’ll talk about first because that’s more core to what cement backerboard is.
Basically, just in case you’re not familiar with it, it’s a different kind of material that you’re putting behind typical tile wall. It’s kind of porous, but still very dense, kind of inflexible type material. Typically, you’d put this directly on the studs rather than putting on drywall or something on top of them.
The kind of classic application is that the tile going on top is itself kind of permeable, especially the grout. For instance, in a shower area, you expect a certain amount of the water to kind of seep into the grout, and perhaps get into whatever’s behind it. If that’s regular drywall, then you risk it getting that wet, and molding out, and stuff like that. You want this kind of material back there that’s more solid, that’s not going to mold, but that’s also semipermeable so when the water gets in there, it’s allowed to evaporate over time, which is kind of the idea.
With our application, we’re using porcelain tile with epoxy grout, so we’re not really expecting water to get back there. The main protection from the walls is actually just that impermeable surface of the tile and the epoxy grout.
The other thing is, if water did get back in there, and if you weren’t using kind of a permeable solution with the cement backerboard, salt would also theoretically be able to get back there. That’s terrible because while water is able to evaporate, saltwater will get into something, and when it dries, the salt crystals will expand, and that thing will just start to get destroyed, which is where so much of the salt damage that we see in our space comes from. That’s kind of just on the salt-proofing side, why you don’t really see that cement backerboard.
The main reason why you see the alternative, which is some kind of either adapted drywall setup, usually MMR, mold and mildew resistant, maybe multilayered for soundproofing, or specifically soundproof drywall, something like QuietRock, also maybe MMR, mold and mildew resistant. The idea with that is in addition to trying to make these wet rooms, which is usually where cement board is going, you’re now trying to soundproof those, and turn them into the equivalent of a sound studio almost. Cement backerboard is not going to provide you the same kind of soundproofing as a really heavy drywall set up, or especially something like QuietRock.
Since you want that soundproofing, is also one of the reasons that we go with a totally impermeable surface on the outside. Other than saltwater, you just wanna make sure that now that you’ve put up this heavy soundproof drywall, you’re protecting it. So kind of for both of those reasons, and they mix together a lot, but that’s typically why you’re not seeing cement backerboard in a float center type application. Instead, what you will see, if you are using tile, is this heavy layer of soundproof drywall, again, whatever, whether it’s custom made or just multilayers of drywall with something like green glue in between. Then you’ll see the porcelain tile on top of that.
All right, that wasn’t so bad. I think that the Graham only show can hold its own, maybe we’ll just kick Ashkahn off for the foreseeable future, you know, just kind of wing it on my own.
If you do not wanna see that, let me know by going to floattanksolutions.com/podcast and I will talk to you tomorrow. Thanks, everyone.
Recent Podcast Episodes
Surface Disinfectant for Tank Walls – DSP 335
What’s the best way to clean the inside of a float tank? And what sort of product should you use?
It turns out that this deceptively simple line of questioning has a major explanation involved. Ashkahn and Graham share what they’ve learned at the World Aquatic Health Conference about surface disinfectant and the best way to protect your float rooms.
Putting a Shower in A Separate Room – DSP 334
Most float centers run a tight schedule with narrow margins for the transitions between floats. Oftentimes relying on their customers to take reasonably timed showers to fit that schedule. If a single customer takes a shower that’s a bit too long, it can throw of the schedule for the rest of the day!
What if showers were in a separate room? Then customers could shower as long as they want! Ashkahn and Graham explain why this is an extremely bad idea.
Having Doors Open into the Hallway – DSP 333
Float centers, more so than some other brick and mortar businesses, tend to be desperate for maximizing the efficiency of their space. And float rooms would have so much extra space if they didn’t have to deal with a door swinging in and out all the time. Why don’t float centers do it this way instead?
Well… Graham and Ashkahn explain exactly why centers don’t do this already, along with the vast majority of other buildings being made currently. It’s likely a code violation and even if it weren’t, it’d probably be unnecessarily hazardous to travel through your center that way.
Using H2O2 Instead of Chlorine – DSP 332
Let’s say you buy a center and want to use H2O2 instead of the chlorine that was being used by the previous owner. Or maybe you want to switch over to H2O2 after using chlorine for a while. Let’s further assume that this is in compliance with your health department and your UV system is sized adequately. What else do you need to know to make this happen? Do you need to change the water?
Ashkahn and Graham lay out all the things to consider and why someone may or may not want to replace the solution in their tank at the same time as replacing the water treatment method in a float tank.
How to Sell a Float Center – DSP 331
It’s not an easy decision to sell a float center. But when you do come up to that point, what do you do? Who do you talk to and how does it work? Should you hire on a broker? What sort of timeline should you expect?
Having never sold a business, Graham and Ashkahn aren’t exactly experts on the subject, but they offer informed advice on where to sell and how long it’ll probably take.
Latest Blog Posts
The Relationship Between the MAHC and Float Tanks
The MAHC stands for the Model Aquatic Health Code. This is a document put out by the Centers for Disease Control that is a set of guidelines for recreational water sanitation and operations.
The MAHC is what is called a “model code,” which means it is not a regulation in and of itself. Instead, the CDC puts out the MAHC as a document which they consider to be a really nice set of code language for recreational water facilities (mostly pools and spas). The MAHC includes everything from the process of getting permits…
The Daily Solutions Podcast – Our Top 5 Episodes from January
We’ve gone through yet another month and Graham and Ashkahn still haven’t split the podcast studio in half with paint and declared a Cold War on each other. Maybe next month. In the meantime, we’ve collected some of the gems from January (heretofore to be known...
A New Year, a New Research List
When we first released the floatation research list back in 2011, it was as close to a comprehensive list as we could create. It was put together in an effort to illustrate that sensory isolation was a thoroughly studied practice and there was scientific evidence for the health claims we were making.
Many float centers adopted this list for their own uses and put it on their sites, spreading the information and making it more available.
In this post, you’ll learn about the updates made to our float research list.
The Daily Solutions Podcast – Our Top 5 Episodes from December
Since a new episode is released, every day, we thought we should do a roundup of some the top episodes so far to keep you from missing out on important topics in the floatation community.
Behold the creme de la creme of podcastery, if you will. Here they are, in chronological order
