Something in the world of floating have you stumped?
Show Highlights
Graham goes solo today while awaiting Ashkahn’s return.
Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello, everybody. My name is Graham, and that’s it, my name’s Graham. There’s no one else in the studio here with me today. Ashkahn’s gonna be back very shortly, and we’ll have the old Grashkamn duo.
But, for now, I’m just gonna launch right into answering today’s question, which is: “You mentioned not to use cement board when using tiles on the wall. What is the reason for that?”
There’s a couple good reasons, besides just we said so. They are related to soundproofing, and then salt, I guess, like so much else in the float world. The salt aspect, I guess we’ll talk about first because that’s more core to what cement backerboard is.
Basically, just in case you’re not familiar with it, it’s a different kind of material that you’re putting behind typical tile wall. It’s kind of porous, but still very dense, kind of inflexible type material. Typically, you’d put this directly on the studs rather than putting on drywall or something on top of them.
The kind of classic application is that the tile going on top is itself kind of permeable, especially the grout. For instance, in a shower area, you expect a certain amount of the water to kind of seep into the grout, and perhaps get into whatever’s behind it. If that’s regular drywall, then you risk it getting that wet, and molding out, and stuff like that. You want this kind of material back there that’s more solid, that’s not going to mold, but that’s also semipermeable so when the water gets in there, it’s allowed to evaporate over time, which is kind of the idea.
With our application, we’re using porcelain tile with epoxy grout, so we’re not really expecting water to get back there. The main protection from the walls is actually just that impermeable surface of the tile and the epoxy grout.
The other thing is, if water did get back in there, and if you weren’t using kind of a permeable solution with the cement backerboard, salt would also theoretically be able to get back there. That’s terrible because while water is able to evaporate, saltwater will get into something, and when it dries, the salt crystals will expand, and that thing will just start to get destroyed, which is where so much of the salt damage that we see in our space comes from. That’s kind of just on the salt-proofing side, why you don’t really see that cement backerboard.
The main reason why you see the alternative, which is some kind of either adapted drywall setup, usually MMR, mold and mildew resistant, maybe multilayered for soundproofing, or specifically soundproof drywall, something like QuietRock, also maybe MMR, mold and mildew resistant. The idea with that is in addition to trying to make these wet rooms, which is usually where cement board is going, you’re now trying to soundproof those, and turn them into the equivalent of a sound studio almost. Cement backerboard is not going to provide you the same kind of soundproofing as a really heavy drywall set up, or especially something like QuietRock.
Since you want that soundproofing, is also one of the reasons that we go with a totally impermeable surface on the outside. Other than saltwater, you just wanna make sure that now that you’ve put up this heavy soundproof drywall, you’re protecting it. So kind of for both of those reasons, and they mix together a lot, but that’s typically why you’re not seeing cement backerboard in a float center type application. Instead, what you will see, if you are using tile, is this heavy layer of soundproof drywall, again, whatever, whether it’s custom made or just multilayers of drywall with something like green glue in between. Then you’ll see the porcelain tile on top of that.
All right, that wasn’t so bad. I think that the Graham only show can hold its own, maybe we’ll just kick Ashkahn off for the foreseeable future, you know, just kind of wing it on my own.
If you do not wanna see that, let me know by going to floattanksolutions.com/podcast and I will talk to you tomorrow. Thanks, everyone.
Recent Podcast Episodes
What’s Going On With the Industry Report? – OSP 04
Come listen to Graham and Ashkahn pick the brain of Juliet, who are all in the studio talking about the State of the Industry Survey that has been released by Float Tank Solutions (hey! That’s us!). To find out what’s new in this year’s survey and information on where to go to fill it out, check out this episode!
What is Water Activity? – OSP 03
Graham and Ashkahn are BACK!
The newly monikered Occasional Solutions Podcast hits the ground running to share some big news about Water Activity. The Float Boys bring their banter to bear to the benefit of you, buds. Thanks to information and collaboration with Roy Vore, they found a way to measure the way pathogens spread through float tank water.
Listen now to hear them dive into the nitty-gritty of new research on float tank water! You don’t wanna miss this.
Tank Topics: Social Media
This tank topic is all about social media, how to use it, what the tools are, and what it’s freaking good for.
Derek Wyatt is featured prominently in these episodes as well, given that he’s our social media wiz over here at Float On. It’s chalk full of amazing info that’ll make your Facebook posts shine!
Rise Interviews with Angela McAllister and Wendi Elmore – OSP 02
In this second release of the Occasional Solutions Podcast, Juliet sits down with Angela McAllister the owner of Lucidity Float and Wellness Center in the Southside of Chattanooga, Tennessee and Wendi Elmore, an employee at Float STL and graduate from the University of Missouri. She has since dedicated her time and efforts to spaces that support the self-care and economic empowerment of people of color, LGBTQIA and gender non-binary communities through tools that include yoga, meditation and now floating.
Tank Topics: Building Materials
Something in the world of floating have you stumped? Show HighlightsThis Tank Topic is about the finer details on building materials. Ashkahn takes a little break for these episodes as Jake (really good guy)...
Latest Blog Posts
Everything you Don’t Know about our Industry Report Revamp
For the past 6 years, Float Tank Solutions has released the State of the Industry Report for the float industry based on a survey we release each year at the beginning of summer. Over the years, we’ve refined the process and adjusted the report, making it more robust,...
The 2019 Float Conference Live Coverage Blog!
Watching everyone reunite, hug, and share what’s been happening in their lives since the last Conference almost seems commonplace this year. It’s become such a natural part of the event, and despite being in a different city, this year is no different. The love and...
Tank Topics – Managing Employees
Summer may be coming to a close but we’ve still got Tank Topics to help you beat the heat.
This collection focuses on managing employees, so we share everything from what to look for when hiring, what orientation looks like, and how we at Float On have structured our management hierarchy. Also… Ashkahn likes socks, so send him some.
Why the 2019 Float Conference is Gonna Rock Denver
With the first industry run Float Conference right around the corner, we wanted to take a minute to talk about what we're excited about at Float Tank Solutions and HelmBot, since we're all gonna be there. This year is especially exciting for us, since no one on our...