Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Graham goes solo today while awaiting Ashkahn’s return.

Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: All right, hello, everybody. My name is Graham, and that’s it, my name’s Graham. There’s no one else in the studio here with me today. Ashkahn’s gonna be back very shortly, and we’ll have the old Grashkamn duo.

But, for now, I’m just gonna launch right into answering today’s question, which is: “You mentioned not to use cement board when using tiles on the wall. What is the reason for that?”

There’s a couple good reasons, besides just we said so. They are related to soundproofing, and then salt, I guess, like so much else in the float world. The salt aspect, I guess we’ll talk about first because that’s more core to what cement backerboard is.

Basically, just in case you’re not familiar with it, it’s a different kind of material that you’re putting behind typical tile wall. It’s kind of porous, but still very dense, kind of inflexible type material. Typically, you’d put this directly on the studs rather than putting on drywall or something on top of them.

The kind of classic application is that the tile going on top is itself kind of permeable, especially the grout. For instance, in a shower area, you expect a certain amount of the water to kind of seep into the grout, and perhaps get into whatever’s behind it. If that’s regular drywall, then you risk it getting that wet, and molding out, and stuff like that. You want this kind of material back there that’s more solid, that’s not going to mold, but that’s also semipermeable so when the water gets in there, it’s allowed to evaporate over time, which is kind of the idea.

With our application, we’re using porcelain tile with epoxy grout, so we’re not really expecting water to get back there. The main protection from the walls is actually just that impermeable surface of the tile and the epoxy grout.

The other thing is, if water did get back in there, and if you weren’t using kind of a permeable solution with the cement backerboard, salt would also theoretically be able to get back there. That’s terrible because while water is able to evaporate, saltwater will get into something, and when it dries, the salt crystals will expand, and that thing will just start to get destroyed, which is where so much of the salt damage that we see in our space comes from. That’s kind of just on the salt-proofing side, why you don’t really see that cement backerboard.

The main reason why you see the alternative, which is some kind of either adapted drywall setup, usually MMR, mold and mildew resistant, maybe multilayered for soundproofing, or specifically soundproof drywall, something like QuietRock, also maybe MMR, mold and mildew resistant. The idea with that is in addition to trying to make these wet rooms, which is usually where cement board is going, you’re now trying to soundproof those, and turn them into the equivalent of a sound studio almost. Cement backerboard is not going to provide you the same kind of soundproofing as a really heavy drywall set up, or especially something like QuietRock.

Since you want that soundproofing, is also one of the reasons that we go with a totally impermeable surface on the outside. Other than saltwater, you just wanna make sure that now that you’ve put up this heavy soundproof drywall, you’re protecting it. So kind of for both of those reasons, and they mix together a lot, but that’s typically why you’re not seeing cement backerboard in a float center type application. Instead, what you will see, if you are using tile, is this heavy layer of soundproof drywall, again, whatever, whether it’s custom made or just multilayers of drywall with something like green glue in between. Then you’ll see the porcelain tile on top of that.

All right, that wasn’t so bad. I think that the Graham only show can hold its own, maybe we’ll just kick Ashkahn off for the foreseeable future, you know, just kind of wing it on my own.

If you do not wanna see that, let me know by going to floattanksolutions.com/podcast and I will talk to you tomorrow. Thanks, everyone.

Recent Podcast Episodes

How to get your Water Tested – DSP 359

Every once in a while during float industry events, during this podcast, or talks given by health department professionals and the like, they’ll say something like “if you get your water tested and…”. But how does a float center do that? Where should they look? Is there just a lab that they can send their float solution to? Are all labs the same? How much does it cost? 

Ashkahn and Graham take on the difficult task of making sense of microbiology testing laboratories, regulatory institutions, and acronyms, all so you don’t have to. 

A Few of Our Favorite Things – DSP 358

Graham and Ashkahn take a break from all the doom and gloom of the float world to talk about the amazing things that floating has brought them. What they love, the things that surprised them, and the many ways in which they’re inspired to stick with it and pioneer in this wild and crazy industry.

Learning to Trust Your Gut in Business – DSP 357

Learning to Trust Your Gut in Business – DSP 357

Sometimes, the hardest part of starting any project is to just take the leap of faith complete step one. 

With some words of encouragement and caution, Graham & Ashkahn channel their inner Tony Robbins and encourage a highly knowledgeable aspiring float center owner, to trust their gut and start their float center.

How Long to Run a Filter Between Floats – DSP 356

How long should you run the filtration system for between floats? It’s an eternal question that has plagued float center owners since the dawn of time (Or at least until 1978 when the first float center opened up). 

Ashkahn and Graham break down the science behind why you should filter for as long as you do and how to properly plan for it. This densely packed episode is filled to the brim with a summary of knowledge on water dilution, filtration, flow meters, and water sanitation brought over to float tanks from the pool and spa world. Take notes as you listen, there’s a lot to assess.

How to Reward your Employees – DSP 355

Recognizing that your employees rock is one of the most valuable traits an employer can have, but only as long as said employer is able to properly acknowledge that appreciation. 

Graham and Ashkahn share their take on rewarding employees for their hard work and how to make it count when you want to give them a gift. The duo has no shortage of examples of how they’ve shown their appreciation at Float On, and this episode is dense with examples of nice gifts and rewards to provide staff, from the practical to the symbolic. 

Latest Blog Posts

B-Gray’s School on Nothing

B-Gray’s School on Nothing

I Got Nothing to Say! Okay, so here’s the thing. Floating is often associated with meditation and ultimately achieving this state of void, commonly and perhaps glibly referred to as “Nothing” by salty tank proprietors everywhere. And listen, I’m totally on board with...

When (and how) Salt Attacks!

When (and how) Salt Attacks!

This post was spurred on by work that I did illustrating hundreds of pages for our Construction Packet. As an illustrator, I spend extra time nailing down details, just to eliminate potential sources of confusion. While looking into salt weathering, I came across some...