Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Graham goes solo today while awaiting Ashkahn’s return.

Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: All right, hello, everybody. My name is Graham, and that’s it, my name’s Graham. There’s no one else in the studio here with me today. Ashkahn’s gonna be back very shortly, and we’ll have the old Grashkamn duo.

But, for now, I’m just gonna launch right into answering today’s question, which is: “You mentioned not to use cement board when using tiles on the wall. What is the reason for that?”

There’s a couple good reasons, besides just we said so. They are related to soundproofing, and then salt, I guess, like so much else in the float world. The salt aspect, I guess we’ll talk about first because that’s more core to what cement backerboard is.

Basically, just in case you’re not familiar with it, it’s a different kind of material that you’re putting behind typical tile wall. It’s kind of porous, but still very dense, kind of inflexible type material. Typically, you’d put this directly on the studs rather than putting on drywall or something on top of them.

The kind of classic application is that the tile going on top is itself kind of permeable, especially the grout. For instance, in a shower area, you expect a certain amount of the water to kind of seep into the grout, and perhaps get into whatever’s behind it. If that’s regular drywall, then you risk it getting that wet, and molding out, and stuff like that. You want this kind of material back there that’s more solid, that’s not going to mold, but that’s also semipermeable so when the water gets in there, it’s allowed to evaporate over time, which is kind of the idea.

With our application, we’re using porcelain tile with epoxy grout, so we’re not really expecting water to get back there. The main protection from the walls is actually just that impermeable surface of the tile and the epoxy grout.

The other thing is, if water did get back in there, and if you weren’t using kind of a permeable solution with the cement backerboard, salt would also theoretically be able to get back there. That’s terrible because while water is able to evaporate, saltwater will get into something, and when it dries, the salt crystals will expand, and that thing will just start to get destroyed, which is where so much of the salt damage that we see in our space comes from. That’s kind of just on the salt-proofing side, why you don’t really see that cement backerboard.

The main reason why you see the alternative, which is some kind of either adapted drywall setup, usually MMR, mold and mildew resistant, maybe multilayered for soundproofing, or specifically soundproof drywall, something like QuietRock, also maybe MMR, mold and mildew resistant. The idea with that is in addition to trying to make these wet rooms, which is usually where cement board is going, you’re now trying to soundproof those, and turn them into the equivalent of a sound studio almost. Cement backerboard is not going to provide you the same kind of soundproofing as a really heavy drywall set up, or especially something like QuietRock.

Since you want that soundproofing, is also one of the reasons that we go with a totally impermeable surface on the outside. Other than saltwater, you just wanna make sure that now that you’ve put up this heavy soundproof drywall, you’re protecting it. So kind of for both of those reasons, and they mix together a lot, but that’s typically why you’re not seeing cement backerboard in a float center type application. Instead, what you will see, if you are using tile, is this heavy layer of soundproof drywall, again, whatever, whether it’s custom made or just multilayers of drywall with something like green glue in between. Then you’ll see the porcelain tile on top of that.

All right, that wasn’t so bad. I think that the Graham only show can hold its own, maybe we’ll just kick Ashkahn off for the foreseeable future, you know, just kind of wing it on my own.

If you do not wanna see that, let me know by going to floattanksolutions.com/podcast and I will talk to you tomorrow. Thanks, everyone.

Recent Podcast Episodes

Problems with Free Floats – DSP 354

The question asker today calls out Graham and Ashkahn on their most common marketing tip: giving away free floats!

The guys are put on trial and forced to defend the practice from someone who has experienced some major fallout from giving out floats to people. They offer some solid advice on how to make sure your free floats reach maximum effect and reassurance in the fact that it’s a relatively low risk practice.

If Money were No Object – DSP 353

Graham and Ashkahn have some fun and talk about all the crazy things they’d add to Float On if money were no object. They cover everything from the impractical to the insane. And Ashkahn reveals his love of robots… and sandwiches.

Accepting Insurance for Floats – DSP 352

There are rumors everywhere in the float industry about float centers billing insurance for floats and how they pulled it off. This podcast is no exception! 

Listen to Graham and Ashkahn opine on the hypothetical and the barely confirmed tales they’ve heard about the possibility of float centers getting that sweet sweet insurance payout, and then listen to the guys talk about the realities of accepting insurance and how it’s not all it’s cracked up to be.

Surviving a Recession – DSP 351

Graham and Ashkahn take on the unenviable task of talking about the harsh realities that the float industry will likely face in an upcoming recession, as well as how to be prepared for it. 

The guys discuss what it was like for Float On opening during 2010, and the pragmatic view of the things most likely to get cut and who will and likely won’t survive an economic downturn. 

How to Talk to New Float Enthusiasts – DSP 350

One of the most amazing things about the float industry is how open and friendly everyone is. Every float center we’ve ever talked to has stories about receiving help, advice, or information from another center or offering it themselves. It makes sense that float center owners would want to pass this goodwill on to the next enthusiast who comes knocking, but it can get a little time consuming talking to everyone. 

Graham and Ashkahn share advice on how to enthusiastically and efficiently talk to new floaters without burning yourself out or make it feel like you’re having the same conversation 100 times in a row. 

Latest Blog Posts

Announcing: The 2018 State of the Industry Report

Announcing: The 2018 State of the Industry Report

In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We’ve released one every year since, and this year we (once again) have the most contributions that we’ve ever had. In total, 293 existing...

2018 Conference Program Introduction

2018 Conference Program Introduction

It was absolutely our pleasure to, once again, host the Float Conference here in Portland. We couldn’t help but be slightly nostalgic remembering all the Conferences we’ve held, all the way back to 2012. Below is the complete introduction for this year’s program intro. While this may be our last year hosting, we look forward to what the rest of the industry has in store for us in the future.