Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Hard water is something that comes from having too many minerals in your water source. It can cause a lot of problems with plumbing if it’s too hard, and most buildings will have resources for dealing with this to help avoid calcium buildup in pipes and along tubs or pools. As for how it interacts with a float tank, specifically, it seems like the larger issue is going to be how it impacts the rest of your building.

Graham and Ashkahn break down what they know about how hard water affects float tanks and the differences you’re going to have to look out for if you’re using well water over municipal water sources.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: And today’s question is – actually questions are “hard or soft water? City or well water? For one tank only please.”  Well fortunately, those aren’t really going to change for multiple tanks.

Ashkahn: Yeah, they should be the same.

Graham: That’s the good news, yeah.

Ashkahn: Okay.

Graham: So there’s a difference between them.

Ashkahn: Between hard and soft water?

Graham: Yeah.

Ashkahn: Yeah, should we explain what that is?

Graham: Yeah, I think we totally should.

Ashkahn: All right so hard and soft water’s usually referring to the amount of mineral content of your water. Hard water has a lot more minerals and metals and stuff like that in it and soft water doesn’t. Typically, I think there are some issues that come with having hard water. People usually want to have softer water. If you’re in a city with very hard water, you usually have a water softener. If you’re in a city with soft water, you don’t have a water hardener or something connected to your building or anything like that.

Graham: Yep. There are some things that come along with overly soft water, as well. But the interesting thing is this doesn’t really effect the float tanks themselves too much.

Ashkahn: Yeah.

Graham: It’s a lot of your other building appliances and things like that, especially if you’re filtering the water going into your float tanks which we fully recommend. If you don’t have a full point of entry building water filtration system, then at least filtering any drop of water that’s being added to your float tank when you’re topping it off or doing a full refill will often get rid of a lot of the minerals and different things you’re worried about building up and being deposited.

Ashkahn: So water hardness can affect pools and hot tubs and stuff like that. They’re often controlling their water hardness and measuring it every day because it can lead to scaling, that’s the term for … people are probably a little bit more used to seeing this in their showers in cities where they live with places with hard water, those buildups of calcium and lime and stuff like that that form that weird almost scummy looking surface thing that usually builds up on tiles or something. So pools and stuff, they can deal with that and it doesn’t look good aesthetically but also that scale can build up inside of pipes and that can constrict pipes and hurt your flow rates. It can also build up on the outside of things like your UV light, that sleeve glass tubes that the light bulbs are in can have scale building up on them. That means the UV light won’t be able to penetrate through that and it will hurt your UV ability. Or scale can build up on the heating elements of a heater and eventually damage those or make them less efficient.

Graham: Yeah, really common on hot water heaters. A lot of the time, the first times you’ll see an impact of having a really hard water going through anything in your system will be around the hot water heater and gathering on those elements or down on the little unions. The heat definitely because it can evaporate out water, gets the minerals just that much closer to coming out of the water and bonding to something else.

Ashkahn: But for some reason, we don’t see this happening in float tanks. Obviously, some reason to do with the Epsom salts but I don’t exactly know why. We tried looking into it and it gets to be some complicated chemistry out there.

Graham: We’re not scientists. We’re simple people.

Ashkahn: There seems to be some information about magnesium prohibiting calcium from really being able to form calcium deposits very easily.

Graham: Yeah like it’s crystalline structure gets disrupted by magnesium maybe if we’re reading these articles correctly.

Ashkahn: Here’s what I do know, I’ve never seen it happen in our float tanks. I haven’t seen it happen in anybody’s float tanks.

Graham: Or in our pipes or anywhere. It really does not seem like the hardness of the water, even if you’re not filtering the water going into your float tanks, has a big impact on the actual float system.

Ashkahn: So that part is pretty cool. It doesn’t seem like we have to worry about it that much, at least from what I know now and what’s been going on. Much more likely, you’re dealing with hard or soft water, probably just for normal things in your shop. Probably your showers are the biggest concern and your hot water heater that’s giving hot water to showers and your sinks and all the normal-

Graham: Bidets.

Ashkahn: -Non-float tank plumbing things that you’d have in your building are probably actually why you’d be trying to make sure you have a water softener if you have really hard water and dealing with that. Not a very float tank issue but still something you would have to deal with just because of the amount of other water fixtures that you have in your building.

Graham: For city versus well water, the advice just ends up being the same for both which is regardless, make sure you’re filtering it going into your float tank. Well water can end up with interesting minerals. City water is often has trace elements of chloramines for disinfection or bromides that they’re putting in there. You want to filter that stuff out but, again, you want to filter in either case. There’s nothing different that needs to happen as a result of having a different water source at all.

Ashkahn: Yeah. Probably not going to. As long as your well water is decent and there’s a lot of cities that can inspect wells and make sure everything looks good and how the well is set up. Only if you’re using a horrible well, it’s all weird and stuff, you might have problems but assuming that’s not the case, then you should be really fine both ways.

Graham: Yep. Watch out for, if you are in a well, that might mean you’re also on a septic system. That’s something to check in. Depending on the size of the system, especially the salt water, you can risk killing off the different bacteria that are making that system function. So I’d say that’s almost more of a concern than the water going into the tanks is what you’re doing with the water coming out on more of land use kind of level.

Ashkahn: Totally.

Graham: Cool.

Ashkahn: Yeah.

Graham: Well thanks for the couple of questions.

Ashkahn: Yep. And if you have more questions, you can go to floattanksolutions.com/podcast.

Recent Podcast Episodes

Pairing Psychotherapy and Floats – DSP 154

It’s easy to look at some of the research that comes from floating or look at special programs for veterans with PTSD and think about how float tanks should be paired with psychotherapy.

Graham and Ashkahn have met several therapists who use float tanks in conjunction with their sessions, sometimes exclusively. They also know that it’s important to recognize that they are trained professionals who are providing a treatment for difficult to treat psychological issues in some cases. Knowing when to leave the work to the experts is a valuable part of providing a service like this one with so many broad uses.

What is too small for a 4-tank float center? – DSP 153

Real estate costs from building out a float center, especially in an urban area, can get costly really quick. Sometimes compromises need to be made. But how much of a compromise is too compromised?

As with the best float center mistakes, Graham and Ashkahn can speak to their personal experience on this issue. They talk about opening a four tank center with less than 1,000 square feet and how much of a mistake it is. They also provide helpful planning tips so you can find out how much space you need at an absolute minimum for your float center.

How Do You Find Time for Hobbies? (Rise) – DSP 152

This is the last episode we recorded at Rise and it seemed fitting to close out the recordings with the organizers again, Jake and Kevin. In this episode they talk with Graham and Ashkahn to answer a question from Greg Griffin about how to manage your time after opening a float center to dedicate to hobbies. 

While the episode starts a little heavy, the conversation turns and begins discussing the value of work and how rewarding it is to be in this industry. 

Thank you to everyone who came and talked to us at Rise and shared your experiences. If we don’t see you at the Float Conference, hopefully we’ll see you next year. As always, float on.

What’s the Weirdest Post Float Experience You’ve Seen (Rise) – DSP 151

Another conversation that was captured at Rise was this little sit down between Graham and Ashkahn and a float center owner by the name of Jeremy out in San Antonio. They talk about a subject that I think comes up whenever float people get together. “What’s the weirdest thing you’ve seen after someone got out of a float?”

Sometimes people have a hard time coming back to Earth after a really good session in the tank and seeing how they interact with the rest of the world afterwards can be heartwarming and enlightening. It’s part of the reason we do what we do. 

Should Float Centers Tone Down Their Personality in Rural Areas? (Rise) – DSP 150

Another great conversation that came out of Rise. Graham and Ashkahn sat down with Russ, a local float center owner who is just about to open his doors. He wanted to talk to the guys about how best to present floating to a more rural and conservative area. Graham and Ashkahn have seen float centers from across the world in rural and metropolitan areas alike and share their take on how best to present floating to people who aren’t as exposed to other alternative wellness practices. 

Latest Blog Posts

Thou Shall Not Program

Thou Shall Not Program

Floating is on the rise, and this means there are lots of new faces trying floating out for the first time.  When someone comes to you for their first time, what should you say to explain floating? Just as importantly, is there anything you should avoid saying? Or...

Meditations on Mediation

Meditations on Mediation

I just had to mediate a discussion between two of my employees, and I couldn’t be happier. Neither of them is going to lose their job: we’ve never fired an employee. Neither of them is going to be paid more or less than the other: we pay all of our employees the same....