Something in the world of floating have you stumped?
Show Highlights
Hard water is something that comes from having too many minerals in your water source. It can cause a lot of problems with plumbing if it’s too hard, and most buildings will have resources for dealing with this to help avoid calcium buildup in pipes and along tubs or pools. As for how it interacts with a float tank, specifically, it seems like the larger issue is going to be how it impacts the rest of your building.
Graham and Ashkahn break down what they know about how hard water affects float tanks and the differences you’re going to have to look out for if you’re using well water over municipal water sources.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: And today’s question is – actually questions are “hard or soft water? City or well water? For one tank only please.” Well fortunately, those aren’t really going to change for multiple tanks.
Ashkahn: Yeah, they should be the same.
Graham: That’s the good news, yeah.
Ashkahn: Okay.
Graham: So there’s a difference between them.
Ashkahn: Between hard and soft water?
Graham: Yeah.
Ashkahn: Yeah, should we explain what that is?
Graham: Yeah, I think we totally should.
Ashkahn: All right so hard and soft water’s usually referring to the amount of mineral content of your water. Hard water has a lot more minerals and metals and stuff like that in it and soft water doesn’t. Typically, I think there are some issues that come with having hard water. People usually want to have softer water. If you’re in a city with very hard water, you usually have a water softener. If you’re in a city with soft water, you don’t have a water hardener or something connected to your building or anything like that.
Graham: Yep. There are some things that come along with overly soft water, as well. But the interesting thing is this doesn’t really effect the float tanks themselves too much.
Ashkahn: Yeah.
Graham: It’s a lot of your other building appliances and things like that, especially if you’re filtering the water going into your float tanks which we fully recommend. If you don’t have a full point of entry building water filtration system, then at least filtering any drop of water that’s being added to your float tank when you’re topping it off or doing a full refill will often get rid of a lot of the minerals and different things you’re worried about building up and being deposited.
Ashkahn: So water hardness can affect pools and hot tubs and stuff like that. They’re often controlling their water hardness and measuring it every day because it can lead to scaling, that’s the term for … people are probably a little bit more used to seeing this in their showers in cities where they live with places with hard water, those buildups of calcium and lime and stuff like that that form that weird almost scummy looking surface thing that usually builds up on tiles or something. So pools and stuff, they can deal with that and it doesn’t look good aesthetically but also that scale can build up inside of pipes and that can constrict pipes and hurt your flow rates. It can also build up on the outside of things like your UV light, that sleeve glass tubes that the light bulbs are in can have scale building up on them. That means the UV light won’t be able to penetrate through that and it will hurt your UV ability. Or scale can build up on the heating elements of a heater and eventually damage those or make them less efficient.
Graham: Yeah, really common on hot water heaters. A lot of the time, the first times you’ll see an impact of having a really hard water going through anything in your system will be around the hot water heater and gathering on those elements or down on the little unions. The heat definitely because it can evaporate out water, gets the minerals just that much closer to coming out of the water and bonding to something else.
Ashkahn: But for some reason, we don’t see this happening in float tanks. Obviously, some reason to do with the Epsom salts but I don’t exactly know why. We tried looking into it and it gets to be some complicated chemistry out there.
Graham: We’re not scientists. We’re simple people.
Ashkahn: There seems to be some information about magnesium prohibiting calcium from really being able to form calcium deposits very easily.
Graham: Yeah like it’s crystalline structure gets disrupted by magnesium maybe if we’re reading these articles correctly.
Ashkahn: Here’s what I do know, I’ve never seen it happen in our float tanks. I haven’t seen it happen in anybody’s float tanks.
Graham: Or in our pipes or anywhere. It really does not seem like the hardness of the water, even if you’re not filtering the water going into your float tanks, has a big impact on the actual float system.
Ashkahn: So that part is pretty cool. It doesn’t seem like we have to worry about it that much, at least from what I know now and what’s been going on. Much more likely, you’re dealing with hard or soft water, probably just for normal things in your shop. Probably your showers are the biggest concern and your hot water heater that’s giving hot water to showers and your sinks and all the normal-
Graham: Bidets.
Ashkahn: -Non-float tank plumbing things that you’d have in your building are probably actually why you’d be trying to make sure you have a water softener if you have really hard water and dealing with that. Not a very float tank issue but still something you would have to deal with just because of the amount of other water fixtures that you have in your building.
Graham: For city versus well water, the advice just ends up being the same for both which is regardless, make sure you’re filtering it going into your float tank. Well water can end up with interesting minerals. City water is often has trace elements of chloramines for disinfection or bromides that they’re putting in there. You want to filter that stuff out but, again, you want to filter in either case. There’s nothing different that needs to happen as a result of having a different water source at all.
Ashkahn: Yeah. Probably not going to. As long as your well water is decent and there’s a lot of cities that can inspect wells and make sure everything looks good and how the well is set up. Only if you’re using a horrible well, it’s all weird and stuff, you might have problems but assuming that’s not the case, then you should be really fine both ways.
Graham: Yep. Watch out for, if you are in a well, that might mean you’re also on a septic system. That’s something to check in. Depending on the size of the system, especially the salt water, you can risk killing off the different bacteria that are making that system function. So I’d say that’s almost more of a concern than the water going into the tanks is what you’re doing with the water coming out on more of land use kind of level.
Ashkahn: Totally.
Graham: Cool.
Ashkahn: Yeah.
Graham: Well thanks for the couple of questions.
Ashkahn: Yep. And if you have more questions, you can go to floattanksolutions.com/podcast.
Recent Podcast Episodes
Funding your center through Kickstarter – DSP 119
Crowdfunding has made so many projects possible that would otherwise not exist. It seems perfect for niche ideas, concepts that would otherwise never see the light of day, and passion projects that just need to happen. This sounds perfect for float centers, but there are some caveats.
Crowdfunding is time intensive and there’s not guarantee of success. Aside from that, there are some issues with it that complicate things for float centers that other crowdfunded projects likely won’t face. Graham and Ashkahn talk about the successes of float center crowdfunding and the not-so-successes as well.
Don’t Build Your Own Float Tank! – DSP 118
For anyone considering a DIY float tank, give this episode a listen first. This isn’t a discussion on the merits of doing things one way versus another or expressing an opinion on one side and playing devil’s advocate for the other. Graham and Ashkahn know painfully well from personal experience the pitfalls of falling into the hubris trap of thinking you can build your own float tanks. They built two large open tanks in Float On and even years later they still cause headaches.
What’s more, they’ve spoken with dozens of people who’ve also gone through this themselves and heard their horror stories after they didn’t listen to the advice of not doing it.
The perception that it can be a cost-cutting measure or a more reliable way to get an operating float tank in your center by going DIY is generally pretty flawed. There’s so much to it that you just can’t consider before the fact.
Should Your Float Center have a Blog? – DSP 117
This seems like a good idea on paper. It helps with SEO stuff for Google. It gives you an outlet to write about floating and share information about the industry. And it seems to fall in line with something that other businesses do, right?
So what are the downsides? How much time and effort does a blog really take? What sort of impact does it have for a float center? Graham and Ashkahn lay out the pros and cons as well as things you may not initially consider about the responsibility of having a blog.
Thoughts on Buying Yelp Ads – DSP 116
There are lots of businesses that experience the dogged persistence of Yelp sales people calling them. Float On has done both buying Yelp ad space and living without it and Graham and Ashkahn break down exactly what that experience was like.
They also go into exactly what Yelp ads mean and how it impacts your float center (or doesn’t, as the case may be) as well as how well Yelp stacks up in comparison to other ad sources.
When is it Time to Open a Second Float Center? – DSP 115
Okay, so… Float On only has one location (not counting Float On Hong Kong) and there’s certainly a reason for that. Graham and Ashkahn have toyed with the idea of opening up another center multiple times throughout the years but something else always came up. As they’ve met more people in the industry, they’ve seen some of the pitfalls and successes from people opening additional locations, franchises and whatever else. They share their thoughts on when they think it’d be best to open and why they say to wait a little bit.
Latest Blog Posts
Much Ado About Nothing
Today, I’d like to talk to you about nothing. But first I suppose I should introduce myself. My name is Ashkahn, and I’m one of the co-founders of Float On. I’ve spent the last 2 years of my life entirely devoted to these magical boxes we’ve all discovered, and...
Past & Present of Oasis & Future of Floating
My focus here/now will be on the past [portion of this 'assignment'] that set me up to be involved in floatation work... It was probably inevitable that I would end up involved with float tanks .... When your last name is Wasserman, which means 'waterman' in german*,...
Past, Present, Future
My life is focused around balance. This is the key to everything I do; A balance between cosmic vows of spirituality, family, and the business with the scales constantly being tipped back and forth on the scale.To understand why I am involved in the Flotation Industry...
The Art of Managing Expectations
When considering opening a floatation center, I came across the following story that helped me understand the process that I was going to be going through as the owner of Float Matrix. There once was a plumber who was excellent at what he did. He knew everything...
