Something in the world of floating have you stumped?
Show Highlights
Hard water is something that comes from having too many minerals in your water source. It can cause a lot of problems with plumbing if it’s too hard, and most buildings will have resources for dealing with this to help avoid calcium buildup in pipes and along tubs or pools. As for how it interacts with a float tank, specifically, it seems like the larger issue is going to be how it impacts the rest of your building.
Graham and Ashkahn break down what they know about how hard water affects float tanks and the differences you’re going to have to look out for if you’re using well water over municipal water sources.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: And today’s question is – actually questions are “hard or soft water? City or well water? For one tank only please.” Well fortunately, those aren’t really going to change for multiple tanks.
Ashkahn: Yeah, they should be the same.
Graham: That’s the good news, yeah.
Ashkahn: Okay.
Graham: So there’s a difference between them.
Ashkahn: Between hard and soft water?
Graham: Yeah.
Ashkahn: Yeah, should we explain what that is?
Graham: Yeah, I think we totally should.
Ashkahn: All right so hard and soft water’s usually referring to the amount of mineral content of your water. Hard water has a lot more minerals and metals and stuff like that in it and soft water doesn’t. Typically, I think there are some issues that come with having hard water. People usually want to have softer water. If you’re in a city with very hard water, you usually have a water softener. If you’re in a city with soft water, you don’t have a water hardener or something connected to your building or anything like that.
Graham: Yep. There are some things that come along with overly soft water, as well. But the interesting thing is this doesn’t really effect the float tanks themselves too much.
Ashkahn: Yeah.
Graham: It’s a lot of your other building appliances and things like that, especially if you’re filtering the water going into your float tanks which we fully recommend. If you don’t have a full point of entry building water filtration system, then at least filtering any drop of water that’s being added to your float tank when you’re topping it off or doing a full refill will often get rid of a lot of the minerals and different things you’re worried about building up and being deposited.
Ashkahn: So water hardness can affect pools and hot tubs and stuff like that. They’re often controlling their water hardness and measuring it every day because it can lead to scaling, that’s the term for … people are probably a little bit more used to seeing this in their showers in cities where they live with places with hard water, those buildups of calcium and lime and stuff like that that form that weird almost scummy looking surface thing that usually builds up on tiles or something. So pools and stuff, they can deal with that and it doesn’t look good aesthetically but also that scale can build up inside of pipes and that can constrict pipes and hurt your flow rates. It can also build up on the outside of things like your UV light, that sleeve glass tubes that the light bulbs are in can have scale building up on them. That means the UV light won’t be able to penetrate through that and it will hurt your UV ability. Or scale can build up on the heating elements of a heater and eventually damage those or make them less efficient.
Graham: Yeah, really common on hot water heaters. A lot of the time, the first times you’ll see an impact of having a really hard water going through anything in your system will be around the hot water heater and gathering on those elements or down on the little unions. The heat definitely because it can evaporate out water, gets the minerals just that much closer to coming out of the water and bonding to something else.
Ashkahn: But for some reason, we don’t see this happening in float tanks. Obviously, some reason to do with the Epsom salts but I don’t exactly know why. We tried looking into it and it gets to be some complicated chemistry out there.
Graham: We’re not scientists. We’re simple people.
Ashkahn: There seems to be some information about magnesium prohibiting calcium from really being able to form calcium deposits very easily.
Graham: Yeah like it’s crystalline structure gets disrupted by magnesium maybe if we’re reading these articles correctly.
Ashkahn: Here’s what I do know, I’ve never seen it happen in our float tanks. I haven’t seen it happen in anybody’s float tanks.
Graham: Or in our pipes or anywhere. It really does not seem like the hardness of the water, even if you’re not filtering the water going into your float tanks, has a big impact on the actual float system.
Ashkahn: So that part is pretty cool. It doesn’t seem like we have to worry about it that much, at least from what I know now and what’s been going on. Much more likely, you’re dealing with hard or soft water, probably just for normal things in your shop. Probably your showers are the biggest concern and your hot water heater that’s giving hot water to showers and your sinks and all the normal-
Graham: Bidets.
Ashkahn: -Non-float tank plumbing things that you’d have in your building are probably actually why you’d be trying to make sure you have a water softener if you have really hard water and dealing with that. Not a very float tank issue but still something you would have to deal with just because of the amount of other water fixtures that you have in your building.
Graham: For city versus well water, the advice just ends up being the same for both which is regardless, make sure you’re filtering it going into your float tank. Well water can end up with interesting minerals. City water is often has trace elements of chloramines for disinfection or bromides that they’re putting in there. You want to filter that stuff out but, again, you want to filter in either case. There’s nothing different that needs to happen as a result of having a different water source at all.
Ashkahn: Yeah. Probably not going to. As long as your well water is decent and there’s a lot of cities that can inspect wells and make sure everything looks good and how the well is set up. Only if you’re using a horrible well, it’s all weird and stuff, you might have problems but assuming that’s not the case, then you should be really fine both ways.
Graham: Yep. Watch out for, if you are in a well, that might mean you’re also on a septic system. That’s something to check in. Depending on the size of the system, especially the salt water, you can risk killing off the different bacteria that are making that system function. So I’d say that’s almost more of a concern than the water going into the tanks is what you’re doing with the water coming out on more of land use kind of level.
Ashkahn: Totally.
Graham: Cool.
Ashkahn: Yeah.
Graham: Well thanks for the couple of questions.
Ashkahn: Yep. And if you have more questions, you can go to floattanksolutions.com/podcast.
Recent Podcast Episodes
Tips for getting celebrities into a float – DSP 64
Celebrities carry a lot of weight with their opinions. Often times they can be trend setters, especially for things like alternative wellness or things that might traditionally be seen as a little “out there” by the standards of contemporary society. Getting one to float in your center is a huge boon, naturally, and can be a really effective way to get some marketing.
So how do you land someone like Steph Curry at your float center? Well, fortunately Graham and Ashkahn are all too familiar with this, having had dozens of celebrities come in and float at Float On. They share their tips on what they do (and don’t do) when having celebrities float at their center.
What is the Model Aquatic Health Code? – DSP 63
The Model Aquatic Health Code is a major change to how the float industry is likely going to be regulated in the future. It has been the subject of lots of whispers and rumors throughout the industry, making it almost like a bogeyman for float centers. Ashkahn has worked closely and advocated for the industry along with members of the Float Tank Association and several others.
He helps explain where it’s at in the process now that the version has been finalized, what that means for float centers, and what to expect after it becomes implemented.
What’s your policy on floats for staff members? – DSP 62
Every float center wants their staff to be knowledgeable and experienced in the practice of floating. They need to be able to answer questions that customers may have, and sharing personal experiences in the tank can be an excellent tool, marketing wise. But how do you balance that with your need to run a business? Some float centers end up hiring their best customers to work the shop, does that help or hurt their bottom line? In this episode, Graham and Ashkahn talk about Float On’s liberal employee float policy and the philosophy behind it, as well as discuss some of the confusing legal quandaries that come with it.
What’s your opinion on hiring friends or relatives? – DSP 61
Graham and Ashkahn over the years have made some difficult choices while running Float On. In this episode they talk about the fortunes and follies of hiring friends to work for them. They’ve had friends that worked on construction, in the shop, building websites… It hasn’t always been the best decision and they’ve lost some friends along the way. So, when is hiring friends the right thing to do? When is it the absolute worst? These guys share their thoughts on the matter.
I’m just putting together my website – any big tips? – DSP 60
Building a website is more and more an essential skill to running a business. Graham and Ashkahn revisit website construction for float centers. They lay out some of the best practices and tips to avoid for websites, having years of website management and marketing experience themselves. They also offer tips on things to avoid and look out for when making your own site; how to maximize it’s effectiveness as well as common mistakes to avoid.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
